nVent CADDY 6M24SM Type H-MSM ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$384.14
nVent CADDY 6M24SM Type H-MSM Armour Spring Steel Conduit-to-Flange Clip, 3/8-Inch Snap-Close, Pack of 100

nVent CADDY 6M24SM Type H-MSM Armour Spring Steel Conduit-to-Flange Clip, 3/8-Inch Snap-Close, Pack of 100

(No reviews yet) Write a Review

Model: 6M24SM

In Stock (leaves warehouse same day if ordered before 3pm ET)

$384.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

nVent CADDY 6M24SM Armour Spring Steel Conduit-to-Flange Clip

The nVent CADDY 6M24SM (also cross-referenced under the legacy Erico part number) is a Type H-MSM Armour spring steel conduit-to-flange clip engineered for fast, snap-close attachment of 3/8-Inch rigid conduit and pipe directly to flange surfaces. Built from spring steel for consistent clamping tension, this clip eliminates the need for separate bolts, nuts, or other loose hardware when mounting conduit runs to structural flanges, strut, or beam edges. It is designed for electricians and contractors who need a quick, repeatable method of securing 3/8-Inch rigid conduit or pipe in commercial and industrial raceway systems, panelboard support runs, and general electrical rough-in work.

Key Features

  • Trade Size: Sized for 3/8-Inch rigid conduit and pipe applications.
  • Durable Construction: Armour spring steel construction delivers consistent spring tension and long-term grip strength under everyday jobsite handling.
  • Snap-Close Design: Type H-MSM snap-close action allows the clip to be installed directly onto a flange without bolts, nuts, or separate fasteners, cutting installation steps.
  • Conduit-to-Flange Mounting: Purpose-built to secure conduit or pipe runs directly to flange edges on structural steel, strut, or beams rather than requiring a drilled or welded support point.
  • Tool-Free Installation: The spring-loaded snap action speeds installation and allows quick repositioning or removal during layout changes and retrofits.
  • Type Designation: Manufactured to the H-MSM type specification for consistent fit, spring tension, and performance across the conduit run.
  • Rigid/Pipe Compatibility: Rated for 3/8-Inch rigid conduit and pipe, matching common branch conduit and support hardware sizing.
  • Cross-Reference: Also identified under the legacy Erico part numbering, simplifying replacement on existing installations that specify the Erico designation.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Commercial and Industrial Conduit Support
  • Structural Steel and Flange-Mounted Raceway Systems
  • Rigid Conduit and Pipe Installations
  • Panelboard and Branch Circuit Support Runs
  • New Construction and Retrofit Electrical Projects

Why nVent CADDY?

nVent CADDY builds on the established Erico engineering heritage behind the 6M24SM clip, delivering spring steel conduit-to-flange hardware designed for dependable, tool-free installation. The Armour spring steel construction and Type H-MSM snap-close design give installers a consistent, repeatable way to secure 3/8-Inch rigid conduit and pipe to flange surfaces on professional electrical projects, without adding separate bolts or fasteners to the bill of materials. For contractors standardizing on flange-mounted conduit support, the 6M24SM offers a straightforward, snap-in alternative to bolted clamps.

Manufacturer Resources

nVent CADDY Full Catalog

Product Specs

list_batch:
CDY-20260915
Product Type:
Conduit Clip
Connection Type:
Snap-Close
Configuration:
Type H-MSM
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Hangers, Straps & Supports
Product Material:
Spring Steel
Product Size:
3/8-Inch
Pack size (unit):
100

nVent CADDY 6M24SM – Frequently Asked Questions

1) What size conduit does the nVent CADDY 6M24SM clip hold?
The 6M24SM is sized for 3/8-inch rigid conduit and pipe. It is a single-size clip, so a 1/2-inch or larger run needs a different size in the family. For 3/8-inch branch runs and support work it drops straight on.
2) Do I need bolts or nuts to install the CADDY 6M24SM conduit clip?
No loose hardware. The Type H-MSM snap-close action lets the clip be pushed onto a flange edge by hand, so there are no bolts, nuts, or separate fasteners to add to the bill of materials. That also means it can be repositioned or pulled off during layout changes.
3) What does the 6M24SM clip actually attach to, and can I use it on drywall or a drilled hole?
It is a conduit-to-flange clip: it grips the edge of a flange on structural steel, strut, or a beam. There is no bolt hole and no anchor, so it will not mount to drywall, concrete, or a drilled support point. If you have no flange edge to clamp to, use a strap or clamp with a mounting hole instead.
4) I have an old spec sheet calling out an Erico part number for this flange clip. Is the 6M24SM the same part?
Yes. The 6M24SM is cross-referenced under the legacy Erico part numbering, so an existing installation specified under the Erico designation takes this clip as the direct replacement. nVent CADDY carries the Erico engineering heritage behind the part.
5) How many clips come in a pack of the nVent CADDY 6M24SM?
Sold 100 clips to the pack, which is how electricians buying for a full rough-in or a repeated panelboard support run usually want it. All pieces are the same 3/8-inch Type H-MSM configuration.
6) Will a spring steel snap clip hold conduit long term, or should I use a bolted clamp?
Spring steel is the working element here, not just the body material: it keeps constant clamping tension on the conduit and on the flange, which is what holds it without a fastener. For fixed, repeated runs across structural steel that is the faster install. Where you need a clamp torqued to a drilled or welded support point, a bolted clamp is the right call instead.
7) Is the CADDY 6M24SM suitable for commercial and industrial electrical work or just residential?
It is built for commercial and industrial raceway, structural steel and flange-mounted support systems, panelboard and branch circuit support runs, and both new construction and retrofit electrical projects. The 3/8-inch sizing matches common branch conduit and support hardware.
How fast can I get the nVent CADDY 6M24SM delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the nVent CADDY 6M24SM come with a warranty?
Absolutely. The nVent CADDY 6M24SM is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the nVent CADDY 6M24SM?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the nVent CADDY 6M24SM from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!