You may also like
NYL-INS RING 2/0AWG 3/8ST NICKLPLTD
Manufacturer Resources
Product Specs
- Country Of Origin:
- Mexico (MX)
- Product Subgroup:
- General Terminals
- Product Type:
- Nylon Insulated Ring Terminal
- Wire Size:
- 2/0 AWG
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Blue
- Product Material:
- Nylon
Sta-Kon RJ717NP – Frequently Asked Questions
1) What wire size does the Sta-Kon RJ717NP ring terminal take?
The RJ717NP is sized for 2/0 AWG conductor. It is a single-size barrel, so it should not be used on smaller cable like 1/0 or 3/0 without the correct terminal for that gauge, since a crimp on an undersized conductor will not hold mechanically or electrically.
2) What stud size does the Sta-Kon RJ717NP ring fit?
The RJ717NP ring tongue is drilled for a 3/8 inch stud, which is the common size on battery posts, panel bus bars, and large breaker lugs. If your terminal block uses 1/4 or 5/16 hardware, you need a different ring tongue, not a washer workaround.
3) Is the Sta-Kon RJ717NP terminal copper or aluminum, and is it plated?
It is a nickel plated terminal with a nylon insulating sleeve over the barrel. Nickel plating is the finish to use where the connection sees heat or a corrosive environment rather than a standard tin plated ring.
4) Can I crimp a 2/0 Sta-Kon RJ717NP ring with hand crimpers?
No. A 2/0 AWG barrel needs a hydraulic or heavy mechanical crimper with the correct die for that gauge. Standard hand crimp pliers made for 22 to 10 AWG insulated terminals will not compress this barrel to a sound connection.
5) What does the blue color on this Sta-Kon ring terminal mean?
The RJ717NP insulation sleeve is blue. On heavy gauge nylon insulated rings the sleeve color is a manufacturer identifier for the barrel size rather than the small-gauge red/blue/yellow convention, so match the terminal to the stated 2/0 AWG conductor size and the 3/8 inch stud, not to the color.
6) Does the nylon insulation on the RJ717NP need extra heat shrink?
The nylon sleeve is part of the terminal and insulates the barrel and the crimp area on its own. Many electricians still add adhesive lined shrink over the barrel-to-cable transition on battery and outdoor runs for strain relief and moisture sealing, but the terminal itself ships insulated.
7) Where is the Sta-Kon RJ717NP made?
Country of origin on the RJ717NP is Mexico, which is the detail procurement teams need for domestic preference or trade documentation on a submittal.
How fast can I get the Sta-Kon RJ717NP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RJ717NP come with a warranty?
Absolutely. The Sta-Kon RJ717NP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RJ717NP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RJ717NP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.