OATEY 42075 2 in. 101 PNC PVC ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$67.14
$17.14
OATEY 42075 2 in. 101 PNC PVC No-Calk Shower Drain with Plastic Strainer

OATEY 42075 2 in. 101 PNC PVC No-Calk Shower Drain with Plastic Strainer

(No reviews yet) Write a Review

Model: 42075
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$67.14
$17.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
2 in. 101 PNC PVC No-Calk Shower Drain with Plastic Strainer

  • Features

    • Can be used with 1-1/2 In Schedule 40 DWV pipe and 1-1/2 In or 2 In Copper DWV pipe when cauling gasket is replaced
    • Includes drain tightening wrench
    • 2” Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking
    • Strainers available in a variety of designer finishes
    • Drain is fixed to the drain pipe from above the shower base
    • Ideal for slab construction
    • Drain body is sealed to the shower base with a fiber and rubber washer
    • Drain top accommodates 4- 1/4 In Universal Snap-Tite Strainers
    • Designed for use with all preformed shower stall bases


42075 - spec sheet

Manufacturer Resources

Product Specs

Volume:
0.029
Department:
Plumbing
Product Group:
Plumbing
Product Subgroup:
Drainage Products
Product Type:
Drain
Product Weight:
0.5

OATEY 42075 – Frequently Asked Questions

1) Will the Oatey 42075 No-Calk shower drain connect to 1-1/2 inch pipe, or only 2 inch?
Out of the box the Oatey 42075 is set up for 2 inch Schedule 40 DWV pipe, held by a mechanically compressed gasket with no caulking. Swap the caulking gasket and the same drain body will take 1-1/2 inch Schedule 40 DWV, or 1-1/2 inch and 2 inch copper DWV. So if your rough-in is 1-1/2 inch PVC or copper, the drain still works, you just need the right gasket for that size.
2) Can a No-Calk shower drain like the Oatey 42075 be installed on a slab with no access underneath?
That is the case it is built for. The 42075 is tightened to the drain pipe from above the shower base, so you never need to get under the floor to make the connection. Oatey calls it out for slab construction. Compare that to a solvent-weld or caulked lead drain, where you are working from below or packing the joint, which is not an option once the pipe is in concrete.
3) Does the Oatey 42075 work with a preformed fiberglass or acrylic shower base?
Yes, it is made for preformed shower stall bases across the board. The drain body seals to the base with a fiber and rubber washer that compresses against the base as you tighten the drain, so the seal is mechanical rather than caulked. That is what makes it usable on molded pans where you cannot bed a drain in mortar.
4) Do I need a special wrench to tighten an Oatey No-Calk shower drain?
No separate purchase needed. A drain tightening wrench comes in the box with the 42075, which is what you use to draw the compression gasket down onto the pipe from above the pan. Worth knowing on a multi-unit job: each drain arrives with its own wrench, so you are not hunting for a spud wrench on site.
5) Is the Oatey 42075 shower drain PVC or metal, and does that matter for my DWV system?
The 42075 body is PVC, which is why it pairs directly with Schedule 40 PVC DWV pipe with no transition fitting or dielectric concern. If the bathroom is plumbed in copper DWV instead, the same body still serves at 1-1/2 or 2 inch once the caulking gasket is changed out, since the seal is a compression gasket rather than a solvent weld.
6) Is a No-Calk compression drain the right choice, or should I use a solvent-weld shower drain?
Pick by access. A No-Calk drain like the Oatey 42075 makes its pipe connection from above the shower base with a compressed gasket, so it suits slab work and any retrofit where you cannot reach the underside of the pan. A solvent-weld PVC drain glues to the riser and generally wants access from below or a dry fit before the pan is set. If you are dropping a preformed base onto concrete, the compression style is the one that lets you finish the job from inside the shower.
7) How much does an Oatey 42075 shower drain weigh for a bulk order?
Each 42075 drain is half a pound, with a volume of 0.029, so a case quantity for a multi-unit remodel stays light and easy to stage. Ordering is straightforward too: it is a single model, manufacturer part number 42075, so there is no finish or size selection to get wrong on a purchase order.
How fast can I get the OATEY 42075 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 42075 come with a warranty?
Absolutely. The OATEY 42075 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 42075?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the OATEY 42075 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!