OATEY 43542 2 in. ABS Horizontal Spigot Urinal Flange Kit

The 43542 is a spigot-end fitting, so the outlet is sized to slip INTO a 2 inch ABS hub or the socket of a 2 inch ABS fitting, not over the outside of a pipe. Solvent weld it into a 2 inch ABS street-side connection, sanitary tee, or trap adapter socket. If your rough-in leaves you with a length of bare 2 inch pipe instead of a hub, you need a coupling or a hub fitting on the wall side first.

Horizontal. The 43542 is a horizontal spigot urinal flange, meaning the waste run comes off the back of the fixture into the wall rather than down through the floor. Wall-hung urinals in commercial restrooms are the normal application. For a floor-outlet fixture you want a vertical or closet-type flange instead.

No, not as a solvent-weld joint. The 43542 is ABS, and ABS cement will not make a code-acceptable bond to PVC. On a PVC system either use a PVC version of the flange or transition mechanically with a shielded no-hub or Fernco-style coupling ahead of the fitting. Match the flange material to the piping already in the wall before you order.

Everything for the fixture connection is in the box. The 43542 kit ships with the bolts, nuts, washers and gaskets, so a service tech setting a wall-hung urinal is not making a second trip for hardware. You still supply the solvent cement for the ABS joint.

Different part, different fixture. A urinal flange like the Oatey 43542 is a 2 inch connection carrying the smaller waste load of a wall-hung urinal, with the outlet running horizontally into the wall. A closet flange is a 3 or 4 inch fitting that sets a water closet over a floor outlet. They are not interchangeable in either direction.

Order Oatey 43542. That is the manufacturer part number for the 2 inch ABS horizontal spigot urinal flange kit, hardware and gaskets included, and it is the number to give a distributor so you do not end up with the PVC or vertical-outlet version.