3 in. or 4 in. Fast Set™ Closet Flange, PVC with metal Ring
43559 - spec sheet
Features
- Test cap will not break or fall into the DWV line
- UPC and ASTM D2661 listed
- Covered under Oatey's Limited warranty
- Over 3 in. pipe or inside 4 in. pipe fit PVC Toilet Flange
- Metal ring has patented bolt slot shelfs to stabilize bolts and eliminate bolt fall through
- 6 screw holes are designed to meet any toilet installation type and provide secure attachment to floor
43559 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.111
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Flashing and Flanges
- Product Type:
- Flange
- Product Weight:
- 0.8
OATEY 43559 – Frequently Asked Questions
1) Will the Oatey 43559 Fast Set closet flange fit 3 inch or 4 inch pipe?
Both. The 43559 goes over 3 inch pipe or inside 4 inch pipe, so one part covers the two common DWV stub-outs under a toilet. Confirm which way your stub is sized before you glue, because the fit is either outside the 3 inch or inside the 4 inch, not both at once.
2) Does the Oatey 43559 toilet flange meet plumbing code for a DWV installation?
It is UPC listed and made to ASTM D2661. Those are the two lines an inspector or a spec writer usually wants on a PVC closet flange, and they are stated for the 43559 itself.
3) Do the closet bolts fall through the slots on the Oatey 43559 flange?
No. The metal ring uses patented bolt slot shelfs that hold the closet bolts in position and stop them dropping through the slot. That is the difference between setting a bowl single-handed and having a helper hold bolts while you lower it.
4) How many screw holes does the Oatey 43559 flange have for fastening to the floor?
Six. The ring is drilled with six screw holes so you can catch solid subfloor regardless of how the bolt slots land relative to the joists or the closet bend, and it suits the range of toilet installation types.
5) Can I leave the test cap in place during pressure testing without it dropping into the drain line?
Yes. The Fast Set design's test cap will not break or fall into the DWV line, so a rough-in test can be capped at the flange and knocked out later without fishing debris out of the closet bend. That matters on multi-unit work where a dropped cap means opening a wall.
6) Is the Oatey 43559 an all-plastic flange or does it have a metal ring?
PVC body with a metal ring on top. The plastic hub takes the solvent weld to the DWV pipe and the metal ring carries the closet bolts and the floor screws, which is the combination most commercial and multi-family specs call for over an all-plastic ring.
7) How much does the Oatey 43559 closet flange weigh for freight or kitting?
0.8 lb each, with a shipping volume of 0.111. Useful if you are palletizing a bathroom rough-in kit or buying flanges by the case for a turn crew.
How fast can I get the OATEY 43559 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 43559 come with a warranty?
Absolutely. The OATEY 43559 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 43559?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 43559 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.