4 in. Aluminum No-Calk 12 in. x 15 in. Base Roof Flashing
12958 - spec sheet
Features
- Collar will not fade
- Do not use petroleum based products or paint on flashing collar
- Not for hot-mopped or built-up roofs
- For warranty product details, refer to the Oatey Limited Warranty document
- Self-sealing collar slides over pipe and requires no caulking
- Rustproof stamped aluminum base allows for easy shaping of flashing
- Metal base for pitch from 0-40° or up to 10/12 roof
- Rated 180°F continuous heat and approved for Type B installations
12958 - spec sheet
Manufacturer Resources
Product Specs
- Base Size Diameter:
- 12" X 15"
- Volume:
- 0.173
- Department:
- Plumbing
- Product Group:
- Roofing
- Product Subgroup:
- Flashing and Flanges
- Product Type:
- Roof Flashing
- Product Finish:
- Unfinished
- Product Material:
- Aluminum
- Product Weight:
- 0.733
OATEY 12958 – Frequently Asked Questions
1) What roof pitch can the Oatey 12958 aluminum flashing be used on?
The stamped aluminum base covers pitch from 0 to 40 degrees, which is up to a 10/12 roof. Because the base is soft aluminum, it shapes to the deck and the shingle courses without cracking. Steeper than 10/12 and you are outside the rated range.
2) Can this No-Calk flashing be used on a flat built-up or hot-mopped roof?
No. The 12958 is not for hot-mopped or built-up roofs. For those assemblies you want a flashing meant to be set in hot asphalt or membrane, not a shingle-style stamped base.
3) Is the Oatey 12958 flashing OK for a B-vent or a hot flue?
It is rated for 180 degrees F continuous heat and approved for Type B installations, so it works over a Type B gas vent as well as over plumbing vent stacks. It is not for single-wall flue pipe running hotter than that rating.
4) Can I paint the collar on an Oatey No-Calk flashing to match the roof?
Don't. Do not use petroleum based products or paint on the flashing collar. The collar is formulated so it will not fade, and paint or petroleum products attack the rubber and shorten the life of the seal. Paint the metal base if you must, keep it off the collar.
5) Will the aluminum base on this flashing rust or corrode on a roof?
The base is rustproof stamped aluminum and ships unfinished, so it weathers rather than rusting. Note that aluminum in contact with copper or with runoff off a copper roof can corrode galvanically, which is a general metals issue rather than a defect in the part.
6) What is the Oatey part number and shipping weight for the 4 inch, 12 x 15 No-Calk flashing?
Manufacturer part number 12958, weighing 0.733 lb. That is the single-unit identity to quote when you are standardizing vent flashings across a roofing or multifamily job.
How fast can I get the OATEY 12958 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 12958 come with a warranty?
Absolutely. The OATEY 12958 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 12958?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 12958 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.