I2K, 1/4 Turn, F1807, Low Lead, Ice Maker Outlet Box - Standard Pack
39136 - spec sheet
Features
- For warranty product details, refer to the Oatey Limited Warranty document
- Valves comply with requirements of NSF 61, Section 9
- Provides quick, safe water supply and shut-off for refrigerator ice maker and water dispenser
- Preloaded nails
- Right or left hand installation
- No support bracket needed
39136 - spec sheet
Manufacturer Resources
Product Specs
- Box Dimensions:
- 3-1/4"W x 4"H x 2-1/2"D
- Faceplate Dimensions:
- 5"W x 6"H
- Volume:
- 0.039
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Fittings
- Product Type:
- General Fittings
- Product Weight:
- 0.55
OATEY 39136 – Frequently Asked Questions
1) What kind of connection does the Oatey 39136 ice maker box use, and do I need to solder it?
No soldering. The 39136 uses an F1807 connection, which is the cold expansion crimp/clamp standard for PEX, so you make the joint with a PEX ring and the matching tool. That also means you can run it in a finished wall without an open flame near framing.
2) Is the Oatey 39136 ice maker box approved for potable drinking water?
The valves on the 39136 meet NSF 61, Section 9, which is the potable water contact standard, and the box is a low lead assembly. That is what a plumbing inspector on a residential or multi-family job will be looking for on a line feeding a drinking water dispenser.
3) Does the Oatey 39136 come in a left hand and a right hand version, or do I order one box?
One box covers both. The 39136 is built for right or left hand installation, so you mount it to whichever stud face the supply line comes from rather than stocking two part numbers. For a property manager buying for multiple units, that means a single SKU across every kitchen regardless of where the fridge sits.
4) Can I use the Oatey 39136 outlet box for a refrigerator water dispenser as well as the ice maker?
Yes. The 39136 feeds both the ice maker and the door water dispenser off the same single cold supply with a quarter turn shutoff at the box, so the appliance can be isolated without going back to a main or a saddle valve.
5) Does the Oatey 39136 ice maker box need a support bracket or blocking between the studs?
No bracket or blocking. The 39136 ships with preloaded nails and fastens straight to the stud, so one person can set it during rough-in. That is the main install difference from bracket-mount boxes that need a cross member between studs.
6) How is the Oatey 39136 packed and how much does one box weigh?
The 39136 is sold as a standard pack, with each unit weighing 0.55 lb and taking up 0.039 of volume. It is light enough to carry a dozen on a rough-in cart for a multi-unit run.
How fast can I get the OATEY 39136 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 39136 come with a warranty?
Absolutely. The OATEY 39136 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 39136?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 39136 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.