Orca Hardware CK-18032 Mission Round Cabinet Knob

The CK-18032 Mission knob is a residential-application knob. For a commercial job (multi-family common areas, hospitality casework, institutional millwork), it isn't the part to standardize on. Solid brass peers like the Deltana KRB175 round knob or the Delaney solid brass cabinet knob are the direction to look for heavier-duty casework hardware.

No. The CK-18032 is not ADA compliant, so it should not be specified for casework on an ADA-governed opening or accessible unit. Round knobs generally require grasping and twisting; a pull is the usual route where accessible operation is required.

It's a knob, single-point mount, not a two-hole pull. That matters when you're replacing existing hardware: a knob leaves one hole, so swapping out a center-to-center pull means either filling and re-drilling or moving to a pull. Schaub's 10030 and 10040 Cafe knobs are knobs with a 7/8 inch center to center if you need a two-hole footprint in a knob form.

For a smaller footprint, the Schaub 1200 Modo cabinet knob is a 16 mm knob, and the Schaub 131 Artifex is a 1-1/2 inch round knob. The Deltana KRB175 round knob runs larger at 1-3/4 inch diameter. All are cabinet knobs, so choose by the diameter that suits the stile width you are working with.

Several cabinet knobs sit next to the Orca CK-18032 Mission round knob without matching its plain round profile. The Schaub 10030 Cafe Modern is a 1 inch oval slot knob with 7/8 inch center to center, and the Schaub 10040 Cafe Modern is a 1 inch oval knob, also 7/8 inch center to center - both are oval rather than round, and both carry a center-to-center dimension, meaning they take a two-hole mounting pattern rather than a single knob screw. The Emtek Astoria (Schaub Collection) is a glass cabinet knob, so the material read is different from a zinc alloy Mission knob. Check the existing bore pattern in your doors and drawer fronts before ordering any of these against a single-screw knob.

The Orca CK-18032 Mission knob is not ADA compliant, which is typical of round cabinet knobs generally: the round grip form is what drives it, not the brand. The peer round knobs sit in the same category - the Deltana KRB175 round knob at 1-3/4 inch and the Schaub 131 Artifex at 1-1/2 inch are both round knobs. Where an opening has to satisfy ADA operable-parts requirements, the answer is usually a pull rather than any round knob; the Emtek 8665 Select and Emtek Allerton, both Schaub Collection, are catalogued as knob/pull items and are the place to start looking.

Four finishes: Black, Oil-Rubbed Bronze, Rose Gold, and Satin Nickel. Satin nickel and oil-rubbed bronze are the two that usually match existing kitchens; black and rose gold are the ones to pick when the whole run is being replaced at once so everything matches.

Yes, and that's the practical reason to pick one collection for a unit turn. The CK-18032 is offered in Black, Oil-Rubbed Bronze, Rose Gold, and Satin Nickel, so a property manager can standardize a whole kitchen or a whole building on one of those. Because it's a residential-rated zinc alloy knob, it fits unit casework rather than commercial millwork.

The Orca CK-18032 Mission knob is designated residential. For a heavier-duty specification, the Deltana KRB175 is a heavy-duty solid brass round knob with a groove at 1-3/4 inch diameter, and the Delaney DLY-43701x is a solid brass cabinet knob. Both are solid brass rather than zinc alloy, which is the usual reason a facility buyer moves off a residential-designated knob when standardizing cabinet hardware across a building.

The Orca CK-18032 belongs to the 18-Mission Collection and is described as transitional. Among peer cabinet knobs, the Schaub 131 Artifex is a 1-1/2 inch round knob and the Schaub 1200 Modo is a 16 mm knob, both plain round forms that read closest to a Mission round. The Emtek Art Deco and Emtek Allerton cabinet knobs, both Schaub Collection, are period-styled series and carry a distinctly different look on the door face.

The Orca CK-18032 is a cabinet knob in the 18-Mission Collection, offered in black, oil-rubbed bronze, rose gold, and satin nickel. If the package needs both knobs and pulls carrying the same design, the Emtek 8665 Select, Emtek Allerton, Emtek Art Deco, and Emtek Astoria, all Schaub Collection, are catalogued as cabinet knob/pull items, so a single series covers doors and drawer fronts together.

Transitional styling in Orca's 18-Mission Collection, so it sits between traditional and contemporary and reads well on shaker fronts. If you want something more decorative in the same knob format, Emtek's Schaub-collection Art Deco and Astoria glass knobs are period-styled; the Schaub 1200 Modo at 16 mm is the minimal contemporary end.

Orca Hardware CK-18032, from the 18-Mission Collection. Finish is the only ordering variable, so a complete order is the CK-18032 plus one of the four finishes.