FLAT TRACK FEATURES:
• Polymer Wheels for quiet operation
• 200 lbs per Door
• 6’ and 8’ Options
• For Interior 1-3/8” or 1-3/4” Thick Doors
• All Fasteners Included
• Additional Options for: Soft Close & Soft Open & Double Door Applications
• Available only in Black
TRACK KITS INCLUDE:
- Track
- 2 Hangers
- Spacers
- End Stops
- Anti-Jump Blocks (only in Flat Track Kits)
- Connector Plate (for optional use, only in FT Kits)
- All Fasteners
- Door Guides
- Instructions
DOWNLOADS
Manufacturer Resources
Product Specs
- Product Type:
- Barn Door Flat Track and Hardware
- Series:
- FTSK Series
- Product Group:
- Sliding Door and Barn Door Hardware
- Product Subgroup:
- Door Track
- Subcategory:
- Door Track
- Commercial/Residential:
- Commercial
- Product Function:
- Track Kit
- Door Hand Direction:
- Non-Handed
- Door Thickness Range:
- 1-3/8" or 1-3/4"
- Product Size:
- 8'
- Mounting Method:
- Sidewall
- Product Style:
- Barn
- Product Category:
- Sliding Door and Barn Door Hardware
- Product Substrate:
- Steel
- Department:
- Door Hardware
Orca Hardware FTSK-BL-8 – Frequently Asked Questions
1) Will this barn door track work on a 1-3/8 inch door, or does it need a 1-3/4?
Both work. The Orca FTSK hangers are set up for interior doors at either 1-3/8 or 1-3/4 inches thick, and the kit ships with the spacers that take up the difference between the door face and the wall. That covers the two standard interior slab thicknesses, so a hollow core 1-3/8 or a solid 1-3/4 slab both hang on it.
2) How much weight can the Orca FTSK flat track carry?
200 lbs per door. That is enough for a solid core 1-3/4 inch slab in most standard interior sizes, but it rules out heavy glass or thick built-up doors. The track itself is steel, and it mounts to the sidewall rather than hanging from the ceiling or jamb, so the framing behind that wall has to carry the load.
3) Do I need to order anything else to hang a barn door with this kit, or is everything in the box?
The kit is complete for one door: track, two spoke wheel hangers, spacers, end stops, anti-jump blocks, a connector plate for optional use, door guides, all fasteners, and instructions. What it does not include is the door itself or any pull or latch hardware. If you want soft close, soft open, or a two door setup, those are separate add-ons.
4) Does this mount to the wall or to the door jamb and header?
Sidewall mount. The FTSK track fastens to the wall above the opening, which means you need solid backing, header framing or a mounted wall board, running the full length of the 8 foot track. It is not a jamb-mounted or ceiling-mounted system, so on an opening with no wall surface above the trim you will need to add a backer board first.
5) Do I have to specify left hand or right hand for this barn door track?
No handing to call out. The FTSK flat track kit is non-handed, so the same kit works whether the door parks to the left or the right of the opening. Handing only comes into play when you set the end stops during install.
6) Is this barn door hardware quiet enough for an office or hotel corridor?
The hangers run polymer wheels rather than bare steel, which is what keeps the roll noise down on a flat track. The kit is rated commercial, so it is intended for traffic beyond a residential closet. If you want it to stop softly instead of hitting the end stop, the soft close and soft open accessories are ordered separately.
7) Can I use two of these kits for a double barn door opening?
Double door setups are handled as a separate option rather than by the standard single door kit, which ships with two hangers, enough for one slab. Each FTSK kit also includes a connector plate, which is what lets flat track sections be joined end to end on longer runs.
8) What keeps a barn door from swinging off the track at the bottom?
Two pieces in the FTSK kit handle that. Anti-jump blocks sit at the hangers and stop the wheels lifting off the flat track, and floor or wall door guides keep the bottom of the slab from swinging away from the wall. Both come in the box along with the fasteners, so there is no separate guide to source.
9) What finish does the Orca FTSK spoke wheel barn door kit come in?
Black only. There is a single model, FTSK-BL-8, so there is no finish or option decision to make when you order the 8 foot kit.
How fast can I get the Orca Hardware FTSK-BL-8 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Orca Hardware FTSK-BL-8 come with a warranty?
Absolutely. The Orca Hardware FTSK-BL-8 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Orca Hardware FTSK-BL-8?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Orca Hardware FTSK-BL-8 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.