Pass & Seymour 2097 Self-Test GFCI Receptacle, 20A 125V

Pass & Seymour 2097 Self-Test GFCI Receptacle, 20A 125V

The Pass & Seymour 2097 Self-Test GFCI Receptacle is a Spec-Grade, 20A, 125VAC duplex ground-fault circuit interrupter built for reliable code-compliant protection. It runs an automatic self-test every three seconds, so it is always verified ready to protect — if the device fails the test, the red LED indicator flashes to signal replacement is needed. Rated for feed-thru wiring at 20A with a NEMA 5-20R configuration, it is UL Listed and cULus certified for professional installations where dependable ground-fault protection is required.

Key Features

• Self-Test Technology: Conducts an automatic test every three seconds, ensuring the device is always ready to protect; the indicator light flashes if the GFCI fails the test and needs replacement.
• SafeLock™ Protection: If critical components are damaged and protection is lost, power to the receptacle is automatically disconnected.
• Electrical Rating: 20 Amp feed-thru capacity at 125VAC, 60Hz, with a Supply Voltage Range of 102-132 VAC for dependable performance.
• Feed-Thru Wiring Configuration: Protects downstream receptacles and prevents line-load reversal miswire — no power to the face or downstream devices if wired incorrectly.
• Durable Construction: High-impact-resistant thermoplastic housing with an extra-long strap and Auto-Ground clip for a positive ground to metal boxes.
• Easy Wiring: Side or internal screw-pressure-plate back-wire terminals accept #10-#14 AWG solid or stranded copper wire, with two back-wire holes per terminal and a ground screw back-wire clamp; mounting screws ship captive in the device and wall plate.
• Trip Performance: Trip Threshold of 5 +/-1 mA with a nominal Trip Time of 0.025 sec. per UL Standard, a 10kA short circuit rating, and Class A GFCI rating.
• Included Wall Plate: Supplied with a matching TP wall plate; dual-direction test and reset buttons are color-matched to the device face.

Certifications & Compliance

• UL Listed
• cULus
• Meets 2015 UL requirements (UL498)
• FSUL Listed (Federal Specification WC596)
• Exceeds UL 943 voltage surge requirements, surviving 100x the required UL 3kA/6kV voltage surge test cycles

Technical Specifications

• CSA Listed: No
• UL Listed: Yes
• Volts: 125
• Amps: 20A
• cULus: Yes
• Federal Spec: Yes
• Country of Origin: China

Typical Applications

• Bathroom, Kitchen, and Wet Bar Receptacle Circuits
• Commercial and Residential Electrical Installations
• Outdoor and Damp Location Circuits Requiring GFCI Protection
• Feed-Thru Protection for Downstream Receptacles
• New Construction and Renovation Wiring

Why Pass & Seymour?

Pass & Seymour engineers the 2097 Self-Test GFCI with high-impact-resistant thermoplastic construction, a Class A GFCI rating, and surge performance that exceeds UL 943 requirements by 100x the required test cycles. Backed by UL Listing, cULus certification, and FSUL Listed status per Federal Specification WC596, this GFCI receptacle delivers the automatic self-testing and SafeLock™ protection professionals need for code-compliant, reliable electrical work.