Pass & Seymour Spec-Grade 20A Self-Test Duplex GFCI Receptacle

Pass & Seymour Spec-Grade 20A Self-Test Duplex GFCI Receptacle

The Pass & Seymour Spec-Grade 20A Self-Test Duplex GFCI Receptacle delivers automatic ground-fault protection with a self-test cycle that runs every three seconds, so the device is always verified ready to protect. Rated 20A at 125VAC (102-132VAC supply range), 60 Hz, this Class A GFCI meets the NEMA 5-20R configuration and is cULus Listed to UL498, exceeding UL 943 voltage surge requirements. Built-in SafeLock™ Protection cuts power to the receptacle if critical components are damaged and protection is lost, and the feed-thru design protects downstream receptacles from the same fault.

Key Features

• Self-Test Monitoring: Conducts an automatic test every three seconds; a flashing indicator light signals the GFCI should be replaced if it fails the test.
• SafeLock™ Protection: Disconnects power to the receptacle if critical components are damaged and protection is lost.
• 20A Feed-Thru Capacity: Supply Voltage 125VAC, 60 Hz (102-132VAC range), protecting downstream receptacles when wired feed-thru.
• Fast Trip Response: Trip Time of 0.025 sec. nominal per UL Standard, with a Trip Threshold of 5 +/- 1 mA.
• 10kA Short Circuit Rating: Class A rated GFCI for reliable fault protection.
• Easy Wiring: Ground screw with back-wire clamp, two back-wire holes per terminal, and side or internal screw-pressure-plate back wire accepting #10-#14 AWG solid or stranded copper wire; captive mounting screws in the device and wall plate.
• Miswire Protection: Prevents line-load reversal miswire, cutting power to the face and downstream receptacles if wired incorrectly.
• Durable Construction: High-impact-resistant thermoplastic housing with an Auto-Ground clip for positive ground to a metal box, dual-direction test and reset buttons, and an extra-long strap.
• Complete Kit: Supplied with a matching TP wall plate; button colors match the device face.

Certifications & Compliance

• UL Listed
• cULus Listed
• Meets 2015 UL requirements
• Exceeds UL 943 voltage surge requirements (survives 100x the required UL 3kA/6kV test cycles)
• FSUL Listed (Federal Specification WC596)
• NEMA 5-20R Configuration

Technical Specifications

• CSA Listed: No
• UL Listed: Yes
• Volts: 125
• Amps: 20A
• cULus: Yes
• Federal Spec: Yes

Typical Applications

• Commercial and Residential Electrical Installations
• Kitchen, Bathroom, and Outdoor Wet-Location Receptacles
• Feed-Thru Protected Downstream Receptacle Circuits
• Branch Circuit Wiring Requiring Class A GFCI Protection
• New Construction and Renovation Projects

Why Pass & Seymour?

Pass & Seymour engineers this Spec-Grade Self-Test Duplex GFCI with SafeLock™ Protection, a 10kA short circuit rating, and high-impact-resistant thermoplastic construction to deliver dependable, code-compliant ground-fault protection. Backed by UL498 and cULus listing plus FSUL Listing to Federal Specification WC596, it is built for demanding commercial and residential electrical work where reliable performance is required.