Pass & Seymour PJ37 Junior-Dut...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$134.59
$94.64
Pass & Seymour PJ37 Junior-Duty Flexible Eye Pulling Grip

Pass & Seymour PJ37 Junior-Duty Flexible Eye Pulling Grip

(No reviews yet) Write a Review

Model: PJ37

In Stock (leaves warehouse same day if ordered before 3pm ET)

$134.59
$94.64
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour PJ37 Junior-Duty Flexible Eye Pulling Grip

The Pass & Seymour PJ37 is a Junior-Duty flexible eye pulling grip built for electricians handling small job wire-pulling tasks. Featuring a 7 inch mesh length, this grip is used to connect insulated wire bundles to pulling tape or to pull wire or rope through conduit, making it a go-to tool for quick, reliable cable installation. The PJ37 is UL Listed, giving contractors confidence in its safety and performance on the job site.

Key Features

  • Mesh Length: 7 inch mesh body sized for junior-duty pulling applications.
  • Flexible Eye Configuration: the flexible eye end allows the grip to be easily attached to pulling tape, rope, or winch line for controlled cable pulls.
  • Junior-Duty Series: indispensable for electricians with small job requirements, offering a compact, easy-to-handle grip for lighter-duty pulls.
  • Versatile Wire Handling: used to connect insulated wire bundles to pulling tape or to pull wire or rope through conduit.
  • UL Listed: independently certified for safety and reliable performance in professional electrical work.

Certifications & Compliance

  • UL Listed

Technical Specifications

  • Mesh Length: 7
  • Country Of Origin: Mexico
  • Product Line: Pass & Seymour
  • Listing: UL Listed

Typical Applications

  • Pulling Wire or Rope Through Conduit
  • Connecting Insulated Wire Bundles to Pulling Tape
  • Small-Job Electrical Wire Installations
  • Commercial and Residential Cable Pulling
  • Renovation and New Construction Wiring Projects

Why Pass & Seymour?

Pass & Seymour engineers junior-duty pulling grips like the PJ37 for electricians who need a dependable, UL Listed tool for everyday wire-pulling tasks. The flexible eye design and 7 inch mesh length make this grip a practical choice for connecting insulated wire bundles to pulling tape or drawing wire and rope through conduit, delivering consistent, code-conscious performance on every job.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Pulling Grip
Configuration:
Flexible Eye
Listing:
UL Listed
Department:
Electrical
Product Group:
Electrical Installation Tools
Product Subgroup:
Cable Pullers

Pass & Seymour PJ37 – Frequently Asked Questions

1) What is the Pass & Seymour PJ37 pulling grip used for?
The PJ37 is a junior-duty wire mesh pulling grip. You slip it over an insulated wire bundle and tie the eye to pulling tape, rope, or a winch line so the pull tension grips the cable instead of the conductors' ends. It is meant for small-job pulls through conduit, the kind of work a service electrician does on a renovation or a short branch-circuit run rather than a long feeder pull.
2) Is the PJ37 the right grip for a heavy feeder or a long service pull?
No. This is the junior-duty model, a 7 inch mesh sized for small-job pulls. For a heavy feeder, a long run, or large-diameter cable you want a heavy-duty or standard-duty grip with a longer mesh body and a higher rated pull. Ordering the PJ37 for that work risks the grip slipping on the jacket.
3) What does the flexible eye on the PJ37 grip do, and how does it differ from a closed or rotating eye?
Flexible eye means the pulling end is a woven loop that bends with the line, so it will follow the cable around a sweep or through an offset instead of fighting it. It ties or clips straight to pulling tape, rope, or a winch line. A rigid closed eye or a swivel-type eye is what you reach for when the pull needs to spin freely or take heavier straight-line tension; the PJ37's flexible eye is built for the lighter, shorter pulls in the junior-duty class.
4) How long is the mesh on the Pass & Seymour PJ37?
Seven inches of mesh body. That short grip length is what puts it in the junior-duty class: it develops enough bite for small bundles on short conduit runs, but a long, heavy feeder pull wants a longer mesh with more surface contact. Match the mesh length to the pull, not just the cable diameter.
5) Is the PJ37 pulling grip UL Listed for electrical work?
Yes, the PJ37 carries a UL Listing. That matters on institutional and government jobs where the spec calls for listed tooling and materials on the site. It is manufactured in Mexico.
6) Can I use the PJ37 grip to pull a rope or fish line through conduit before the wire?
Yes. The PJ37 is used both to pull wire and to pull rope through conduit, so you can use it on the setup pull as well as the cable pull itself.
7) What part number do I order for the Pass & Seymour junior-duty flexible eye pulling grip?
Order Pass & Seymour PJ37. That is the manufacturer part number for the junior-duty flexible eye version, and it is the single configuration offered under that number, so there are no finish or size options to specify.
How fast can I get the Pass & Seymour PJ37 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PJ37 come with a warranty?
Absolutely. The Pass & Seymour PJ37 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PJ37?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PJ37 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!