Pass & Seymour Flexcor Single ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$25.26
Pass & Seymour Flexcor Single Eye Bus Drop Support Grip

Pass & Seymour Flexcor Single Eye Bus Drop Support Grip

(No reviews yet) Write a Review

Model: FC30

In Stock (leaves warehouse same day if ordered before 3pm ET)

$25.26
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour Flexcor Single Eye Bus Drop Support Grip

The Pass & Seymour Flexcor (FC30) Single Eye Bus Drop Support Grip is a closed-mesh cable support grip designed to relieve direct tension from critical electrical connections while absorbing vibration and flexing. Woven of galvanized steel wire, this bus drop grip accommodates a cable diameter of 0.30 - 0.43 inches, with a 9-in bale length and 4.5-in mesh length, delivering a break strength of 1100 lbs. It is UL Listed and CSA Listed for dependable performance in demanding service and bus drop applications.

Key Features

  • Cable Diameter: Accommodates cable diameters of 0.30 - 0.43 inches for a secure, snug fit.
  • Single Eye Attachment: Offered with a single eye attachment configuration for straightforward hardware connection.
  • Durable Construction: Woven of galvanized steel wire in a closed mesh pattern for corrosion resistance and long service life.
  • Bale Length: 9-in bale length sized for standard bus drop installations.
  • Mesh Length: 4.5-in mesh length provides secure cable engagement along the grip body.
  • Break Strength: Rated to 1100 lbs, providing reliable mechanical support for suspended cable runs.
  • Tension Relief & Vibration Absorption: Relieves direct tension from critical connections and absorbs vibration and flexing to protect terminations.

Certifications & Compliance

  • UL Listed
  • CSA Listed

Technical Specifications

  • Product Line: Pass & Seymour
  • Country of Origin: Mexico
  • Packaging: 20 EA
  • Cable Diameter: 0.30 - 0.43 in
  • Bale Length: 9-in
  • Mesh Length: 4.5-in
  • Break Strength: 1100 lbs
  • Attachment Type: Single Eye

Typical Applications

  • Bus Drop Cable Support
  • Service Entrance and Feeder Cable Support
  • Tension Relief at Critical Electrical Connections
  • Vibration and Flexing Absorption for Suspended Cable Runs
  • Commercial and Industrial Electrical Installations

Why Pass & Seymour?

Pass & Seymour Flexcor support grips are woven of galvanized steel wire and backed by UL and CSA listings, giving electrical professionals a corrosion-resistant, code-recognized solution for supporting bus drop and service cables. With a 1100 lb break strength and a single eye attachment, this grip is built to relieve tension from critical connections and stand up to the vibration and flexing found in demanding installations.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
PASS-20260820
Product Type:
Support Grip
Configuration:
Single Eye
Listing:
UL Listed
Standards:
CSA Listed
Product Material:
Galvanized Steel
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Cable Support Systems

Pass & Seymour FC30 – Frequently Asked Questions

1) Can the Flexcor FC30 grip be installed on cable that is already terminated?
No. The FC30 is a closed mesh grip, so it must be slid on over the cut end of the cable before the connector or termination goes on. If the cable is already made up at both ends, you need a split lace or lace-up style grip instead.
2) Is a single eye or a double eye grip right for a bus drop?
The FC30 is a single eye grip, meaning one bale at the top for a single attachment point to a hook, hanger, or eyebolt. That is the usual choice for a straight vertical bus drop where the cable hangs from one point overhead. Double eye or split lace designs exist for cases where you need to pull from two points or install over a cable that is already terminated; the FC30 is a closed mesh, so it has to be slipped over the free end of the cable.
3) Is the FC30 bus drop grip UL listed for commercial and industrial jobs?
Both UL Listed and CSA Listed. That covers inspections on either side of the border, which matters for service entrance, feeder, and bus drop support in commercial and industrial installations.
4) How long is the mesh and bale on the FC30 grip, and how much cable does it grab?
Mesh length is 4.5 inches, with a 9 inch bale. The 4.5 inch mesh is what engages the jacket and distributes the pull along the cable rather than at one point; the 9 inch bale gives you the loop length to reach your hanger or hook. Allow for that bale length when you set the elevation of your attachment point so the drop lands where you want it.
5) Will a galvanized steel support grip hold up in a damp or dusty plant?
The Flexcor FC30 mesh is woven from galvanized steel wire, which gives it corrosion resistance for typical indoor industrial and commercial service. For heavy chemical exposure or washdown areas, stainless mesh is the usual step up; galvanized is the standard choice for general plant and bus drop work.
6) Does the FC30 ship individually or in a carton quantity?
Packaging on the Flexcor FC30 is 20 each, so it comes as a carton quantity rather than a single piece. Worth knowing if you are standardizing grips across a plant retrofit versus buying one for a single drop.
How fast can I get the Pass & Seymour FC30 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour FC30 come with a warranty?
Absolutely. The Pass & Seymour FC30 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour FC30?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour FC30 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!