Pass & Seymour FC40 Flexcor Si...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$93.24
$48.40
Pass & Seymour FC40 Flexcor Single Eye Support Grip, Tinned-Stainless Steel

Pass & Seymour FC40 Flexcor Single Eye Support Grip, Tinned-Stainless Steel

(No reviews yet) Write a Review

Model: FC40

In Stock (leaves warehouse same day if ordered before 3pm ET)

$93.24
$48.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour FC40 Flexcor Single Eye Support Grip, Tinned-Stainless Steel

The Pass & Seymour FC40 Flexcor Support Grip is a service and bus drop grip designed for cable diameters of 0.41 - 0.56 in., featuring a single eye attachment for secure termination. Woven of corrosion-resistant tinned-stainless steel wire, this grip relieves direct tension from critical cable connections while absorbing vibration and flexing. It is UL Listed and CSA Listed, making it suitable for demanding electrical support applications.

Key Features

  • Cable Diameter: Accommodates cable diameter of 0.41 - 0.56 in. for service and bus drop applications.
  • Durable Construction: Woven of corrosion-resistant tinned-stainless steel wire for long-term reliability in exposed installations.
  • Attachment Style: Single eye attachment configuration for straightforward, secure hardware connection.
  • Bale Length: 9 in. bale length with a 5.0 in. mesh length for consistent grip performance.
  • Tension Relief: Relieves direct tension from the critical connection and absorbs vibration and flexing to protect service and bus drop cable runs.
  • Approvals: Most Flexcor products carry UL and/or CSA approvals; contact factory for specific approval information.

Certifications & Compliance

  • UL Listed
  • CSA Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Length: 5.0 in
  • Product Line: Pass & Seymour

Typical Applications

  • Service Drop Cable Support
  • Bus Drop Cable Support
  • Utility and Commercial Electrical Installations
  • Vibration and Flex Relief at Critical Connections

Why Pass & Seymour?

Pass & Seymour's Flexcor FC40 support grip is woven of corrosion-resistant tinned-stainless steel wire and backed by UL and CSA approvals, delivering dependable tension and vibration relief for critical service and bus drop connections. It's a trusted choice for professionals who need code-compliant, long-lasting cable support hardware.

[{"name": "Product Material", "value": "Tinned-Stainless Steel"}, {"name": "Product Type", "value": "Support Grip"}, {"name": "Configuration", "value": "Single Eye"}, {"name": "Listing", "value": "UL Listed"}, {"name": "Standards", "value": "CSA Listed"}, {"name": "Country of Origin", "value": "Mexico"}]

Manufacturer Resources

Spec Sheet

Product Specs

Product Length:
5.0 in
Product Line:
Pass & Seymour
Product Width:
0.56 in
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Type:
Support Grip
Product Subgroup:
Cable Support Systems

Pass & Seymour FC40 – Frequently Asked Questions

1) What cable diameter does the Pass & Seymour FC40 support grip fit?
The FC40 Flexcor grip is sized for cable with an outside diameter of 0.41 to 0.56 inches. Measure the jacket OD of the drop cable, not the conductor size. If your cable falls outside that window the mesh either will not close down enough to grip or will not slide over the jacket, so a different range grip is the right call.
2) Is the Pass & Seymour FC40 UL Listed and CSA approved for an inspected job?
Both. The FC40 Flexcor grip is UL Listed and CSA Listed, so it covers inspections on either side of the border. Note the broader Flexcor line carries UL and/or CSA approvals model by model, so if you are specifying a different Flexcor part number for the same run, confirm that part's own approvals rather than assuming the family.
3) Is the FC40 grip a single eye or double eye design, and what does that mean for how I hang it?
Single eye. The FC40 has one closed loop at the top of the bale for attachment to a hook, clevis, or messenger hardware, which suits a straight vertical drop where the pull is in line with the cable. Double eye or double support grips are the ones you reach for when the load is shared between two attachment points or the run turns.
4) Will a tinned stainless steel support grip hold up outdoors or in a wash-down area?
The FC40 mesh is woven from corrosion-resistant tinned-stainless steel wire, which is why it gets specified for exposed service drop and bus drop work rather than a plated carbon steel grip. Tinned stainless resists the corrosion you get from weather, humidity, and general plant atmosphere over a long service life.
5) How long is the mesh and bale on the FC40 grip?
Mesh length is 5.0 inches and the bale measures 9 inches. Those two numbers set how much straight cable you need below the attachment point before the grip ends and the cable is free to flex, so allow roughly the mesh plus bale of clearance when you lay out the hook or bracket height.
6) What is a support grip actually doing on a bus drop cable?
It takes the weight and the working strain off the electrical connection. The FC40 mesh tightens on the jacket as load is applied, so the cable hangs from the grip rather than pulling on the terminations, and the woven body absorbs vibration and flexing from a moving drop. On a bus drop feeding a hoist or a machine that runs, that vibration relief is the whole point.
7) Can I use the FC40 grip as a strain relief where cable enters a box or enclosure?
The FC40 is built as a service and bus drop grip, meaning it is meant to suspend a cable from an overhead attachment point using its single eye. A cord connector or a strain relief cord grip with a threaded hub is the part for an enclosure entry, since that job needs a sealed threaded connection the FC40's open bale does not provide.
8) Where is the Pass & Seymour FC40 made?
Country of origin on the FC40 Flexcor grip is Mexico. That is the detail purchasing usually needs for domestic-preference or supplier documentation on government and institutional orders.
How fast can I get the Pass & Seymour FC40 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour FC40 come with a warranty?
Absolutely. The Pass & Seymour FC40 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour FC40?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour FC40 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!