Pass & Seymour FC70 Flexcor Si...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$124.81
$47.80
Pass & Seymour FC70 Flexcor Single-Eye Support Grip, 0.70 - 0.85 in. Cable Diameter, Tinned-Stainless Steel

Pass & Seymour FC70 Flexcor Single-Eye Support Grip, 0.70 - 0.85 in. Cable Diameter, Tinned-Stainless Steel

(No reviews yet) Write a Review

Model: FC70

In Stock (leaves warehouse same day if ordered before 3pm ET)

$124.81
$47.80
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour FC70 Flexcor Single-Eye Support Grip, 0.70 - 0.85 in. Cable Diameter, Tinned-Stainless Steel

The Pass & Seymour FC70 is a Flexcor support grip built for service and bus drop cable applications, featuring a single eye attachment sized for cable diameters of 0.70 - 0.85 in. Woven from corrosion-resistant tinned-stainless steel wire, this grip relieves direct tension from the critical connection point and absorbs vibration and flexing so terminations stay protected over the life of the installation. The FC70 carries both UL Listed and CSA Listed approvals, making it a dependable choice for electrical contractors who need code-compliant cable support on service drops, bus drops, and similar overhead or vertical cable runs.

Key Features

  • Cable Diameter: Engineered to fit cables measuring 0.70 - 0.85 in. in diameter for a secure, snug grip.
  • Durable Construction: Woven of corrosion-resistant tinned-stainless steel wire, giving support grips added protection against moisture and outdoor exposure compared to standard galvanized steel bus drop grips.
  • Single Eye Attachment: Configured with a single eye connection (as opposed to a locking bale) for straightforward service and bus drop mounting.
  • Tension Relief: Relieves direct tension from the critical connection, reducing strain on splices, terminations, and hardware.
  • Vibration & Flex Absorption: Absorbs vibration and flexing that would otherwise fatigue cable and connection points over time.
  • Mesh Length: 8.5 in. woven mesh length provides consistent, even coverage and grip along the cable jacket.
  • Woven Wire Mesh Design: The interlocking wire mesh design distributes holding force evenly around the full circumference of the cable.

Certifications & Compliance

  • UL Listed
  • CSA Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Length: 8.5 in
  • Product Line: Pass & Seymour

Typical Applications

  • Service Entrance Cable Support
  • Bus Drop Cable Installations
  • Commercial and Industrial Electrical Installations
  • Vibration and Flex-Prone Cable Runs
  • Overhead and Vertical Cable Drops
  • Renovation and New Construction Projects

Why Pass & Seymour?

Pass & Seymour builds the FC70 Flexcor support grip from corrosion-resistant tinned-stainless steel wire, delivering dependable, long-lasting cable support on service and bus drop connections where vibration, flexing, and tension are ongoing concerns. Backed by UL Listed and CSA Listed approvals, the FC70 helps electrical professionals deliver code-compliant installations that reduce strain on critical cable terminations and extend the service life of the surrounding connection hardware.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Support Grip
Product Material:
Tinned-Stainless Steel
Configuration:
Single Eye
Listing:
UL Listed
Standards:
UL-CSA
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Cable Support Systems
Product Length:
8.5 in
Product Width:
0.85 in

Pass & Seymour FC70 – Frequently Asked Questions

1) What cable diameter does the Pass & Seymour FC70 support grip fit?
The FC70 Flexcor grip is sized for cable with an outside diameter of 0.70 to 0.85 inch. Measure the jacket OD, not the conductor size. If your cable falls outside that window the mesh will not close down evenly on the jacket and the holding force spreads unpredictably, so you want a grip in the range that brackets your actual measured diameter.
2) Is the FC70 a single eye or a locking bale grip, and what does that change for mounting?
Single eye. The FC70 is built with one fixed eye at the top, which you hook to a clevis, hook, or similar anchor point above the drop. A locking bale version is what you use when you need to open the fitting and attach it without threading it onto the anchor first. With the single eye you plan the attachment point before the grip goes on the cable.
3) Can I use a tinned-stainless steel bus drop grip outdoors or in a damp location?
The FC70's mesh is woven from corrosion-resistant tinned-stainless steel wire, which gives it added protection against moisture and outdoor exposure compared to standard galvanized steel bus drop grips. That is the reason to spec it on exterior service entrance drops, wash-down areas, and anywhere a galvanized mesh would start showing rust.
4) How long is the mesh on the FC70 grip, and how much cable does it need?
The woven mesh runs 8.5 inches, and that is the product length as well. Plan on at least that much straight, undamaged jacket below the attachment point so the mesh can seat and grip along its full length. Bunching it up on a short run or letting it overlap a bend defeats the even circumferential hold the mesh is built to give.
5) What is a support grip actually doing on a service drop, and do I need one?
It takes the weight and pull off the termination. The FC70 mesh grips the cable jacket around the full circumference and transfers the load to the anchor above, so the splice, lugs, and connection hardware are not carrying tension. It also absorbs vibration and flexing that would otherwise fatigue the cable at the connection over time. On overhead and vertical drops, that is the difference between a termination that holds for the life of the install and one that works loose.
6) Is the FC70 right for a vertical riser, or only for overhead drops?
Both are listed applications for this grip: service entrance cable support, bus drop installations, and overhead and vertical cable drops. The mesh works the same way in either orientation, pulling tight around the jacket as the load increases. What it does not do is change diameter range, so the 0.70 to 0.85 inch window still governs.
How fast can I get the Pass & Seymour FC70 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour FC70 come with a warranty?
Absolutely. The Pass & Seymour FC70 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour FC70?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour FC70 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!