You may also like
Pass & Seymour TP826I TradeMaster 2-Gang Nylon Wallplate, Duplex Receptacle & Decorator Opening, Ivory
Model: PSE-TP826-I
Pass & Seymour TP826I TradeMaster 2-Gang Nylon Wallplate, Duplex Receptacle & Decorator Opening, IvoryThe Pass & Seymour TP826I is a TradeMaster 2-Gang Nylon Wallplate featuring 1 Duplex Receptacle...
Pass & Seymour
$52.17
$6.47
Pass & Seymour TP7LA TradeMaster 1-Gang Nylon Wallplate, Single Receptacle Opening, Light Almond
The Pass & Seymour TP7LA is a TradeMaster 1-Gang wallplate with a single receptacle opening, finished in Light Almond. Molded of rugged, practically indestructible self-extinguishing nylon with a nominal thickness of .070 inch, this plate is built for high-abuse environments and carries a cULus Listing for code-compliant installations. It is part of the extended 'TP' series, sized with an extra 3/16 inch of width and height over standard plates for broader wall coverage.
Key Features
- Configuration: 1-Gang wallplate with a single receptacle opening for standard duplex or single receptacle devices.
- Durable Construction: Molded of rugged, practically indestructible self-extinguishing nylon, ideal for demanding, high-abuse environments.
- Nominal Thickness: .070 inch for a consistent, secure fit over wall-mounted devices.
- Extended TP Series Sizing: An extra 3/16 inch of width and height over Standard size plates for improved wall coverage.
- Finish: Matte Light Almond finish that blends cleanly with light-toned wall finishes.
- High-Abuse Rated: Preferred for hospital, industrial, institutional, and other high-abuse applications where standard plates fail prematurely.
Certifications & Compliance
- cULus Listed
Technical Specifications
- Country Of Origin: United States
- Product Finish: Matte
- Product Height: 4.6875 in
- Product Line: Pass & Seymour
- Product Width: 2.9375 in
- Product Depth: 0.25 in
Typical Applications
- Hospital and Healthcare Facility Wiring Devices
- Industrial and Institutional Buildings
- Commercial Receptacle and Wiring Device Installations
- High-Traffic and High-Abuse Areas
- New Construction and Renovation Projects
Why Pass & Seymour?
Pass & Seymour's TradeMaster TP7LA wallplate is molded from rugged, self-extinguishing nylon and backed by a cULus Listing, giving electrical contractors a wallplate built to withstand high-abuse commercial, industrial, and institutional environments. The extended TP series sizing and consistent .070 inch thickness deliver a secure, reliable fit for professional, code-compliant installations.
Manufacturer Resources
Spec Sheet
Product Specs
- Product Material:
- Nylon
- Product Type:
- Single Receptacle Wallplate
- Product Color:
- Light Almond
- Configuration:
- 1-Gang
- Product Finish:
- Matte
- Listing:
- cULus
- Country Of Origin:
- United States
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Subgroup:
- Wallplates
- Product Depth:
- 0.25 in
- Product Width:
- 2.938 in
- Product Height:
- 4.688 in
Pass & Seymour TP7-LA – Frequently Asked Questions
1) Will the Pass & Seymour TP7LA cover gaps and paint lines left by an older wallplate?
That is what the TP series is for. The TP7LA measures 4.688 inches by 2.938 inches, an extra 3/16 inch of width and height over a standard size plate, so it covers a bit more wall around the box. Handy on renovation work where the old plate left a paint outline or the drywall cut is sloppy. Depth is 0.25 inch.
2) Does the TP7LA fit a standard duplex receptacle?
Yes. It is a 1-gang plate with a single receptacle opening, sized for standard duplex or single receptacle devices. It will not work over a decorator/screwless-style device opening or a toggle switch, those need a different cutout.
3) Will a Pass & Seymour TP7LA cover a 30 or 50 amp dryer or range receptacle?
No. The TP7LA is a 1-Gang nylon wallplate with a single receptacle opening sized for standard duplex or single receptacle devices, so the opening will not match a 30/50-amp power receptacle. For that opening, the Mulberry 97221T08 is a 430 stainless steel wallplate made for a 30/50-amp 3-wire receptacle, and the Mulberry 97223T08 is a 2-gang 430 stainless steel plate for 30/50/60-amp receptacles.
4) Is a nylon wallplate tough enough for a hospital corridor or a school?
Nylon is the material spec'd for exactly those jobs. The TP7LA is molded from self-extinguishing nylon at a nominal .070 inch thickness, and Pass & Seymour positions it for hospital, industrial, institutional, and other high-abuse areas where thermoplastic plates crack or discolor. It is cULus Listed.
5) Will Light Almond match the ivory or almond devices already in my building?
Light Almond is a distinct shade from both ivory and almond, so it matches Light Almond devices, not those. The TP7LA is a matte finish rather than gloss, which is worth knowing if the existing plates on the floor are glossy, the sheen will read differently even in the same color family.
6) Does the TP7LA meet code for a listed wallplate on an inspected job?
The TP7LA carries a cULus Listing, which covers both US and Canadian requirements, so it satisfies a spec calling for a listed wallplate. The nylon is self-extinguishing. No other ratings are claimed for it.
7) Should I use a nylon plate or stainless steel for a receptacle in a shop or plant?
Nylon like the TP7LA is the common choice for general commercial and institutional duplex outlets: it is non-conductive, colored to match devices, and takes abuse without denting. Stainless is the move when you need metal, such as a high-amperage or twist-lock outlet. For those, ZenSupply carries Mulberry 430 stainless plates, including the 97221T08 for a 30/50-amp 3-wire receptacle and the 2-gang 97223T08 for 30/50/60-amp receptacles. Note those are different device cutouts entirely, not substitutes for a duplex plate.
8) Nylon versus stainless steel wallplate for a high-abuse area - what is the difference?
The Pass & Seymour TP7LA is molded nylon with a matte Light Almond finish and a cULus Listing, carrying a nominal .070 inch thickness and extended TP sizing that adds 3/16 inch of width and height for broader wall coverage. The Mulberry plates in the same application, such as the 97778 and 97223T08, are formed from 430 grade stainless steel, which gives a metal face in a natural brushed appearance rather than a color-matched plastic one. Choose nylon when you want the plate to blend with light-toned devices and walls, and stainless when a metal face is specified.
9) What is the exact part number and where is the TP7LA made?
Order it as Pass & Seymour TP7-LA, the TradeMaster 1-gang single receptacle plate in Light Almond. Country of origin is the United States.
How fast can I get the Pass & Seymour TP7-LA delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour TP7-LA come with a warranty?
Absolutely. The Pass & Seymour TP7-LA is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour TP7-LA?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour TP7-LA from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.