You may also like
PDQ XGT182 Grade 1 Office / Entry Cylindrical Lever Lock
Grade 1 Extra Heavy Duty Cylindrical Lock
The PDQ XGT182 is the Office / Entry function (ANSI/BHMA F82) of the PDQ XGT Series Grade 1 Extra Heavy Duty Cylindrical Lock.
The PDQ XGT Series is an extra heavy duty cylindrical lock certified to ANSI/BHMA A156.2 Grade 1 and cycle tested to over 3 times the BHMA standard. A 2:1 latch bolt throw allows a 41 degree lever rotation with the 2-3/4" backset, which reduces torque and lengthens the life of the lock.
XGT is the step up from the GT Series for doors that face heavy abuse, with 3,000 lbf-in of lever torque resistance and a 13-gauge steel anti-rotation plate. It is assembled in Lancaster, PA.
Key Features
- Heavy duty diecast chassis with investment cast, cold rolled steel and stainless steel mechanism
- 13-gauge steel anti-rotation plate for added stability
- 3,000 lbf-in lever torque resistance, about 4 times the ANSI/BHMA standard
- Solid diecast Philadelphia, Boston or Miami levers on 3-3/8" wrought brass roses with concealed screws
- Non-handed; fits doors 1-3/4" to 2-1/4" thick with through-bolted mounting and a standard ANSI A156.115 (161) prep
- Keyed functions take a Schlage C compatible conventional cylinder, small format IC cores compatible with Best, Falcon and Arrow, or Schlage large format IC cores (Philadelphia lever only)
- UL 10C listed for 3-hour fire doors, single doors up to 4' x 8', and approved for the Florida High Velocity Hurricane Zone
- Complies with ADA and ICC/ANSI 117.1; Limited Lifetime Warranty on the mechanical lock
Technical Specifications
- Grade: Grade 1
- ANSI/BHMA Function: F82
- Lock Function: Office / Entry
- Keyed Function: Single Cylinder
- Lock Type: Cylindrical
- Backset (Distance): 2-3/4"
- Door Hand Direction: Non-Handed
- Fire Rated: Yes
- Warranty: Limited Lifetime
- ANSI Standard: A156.2
- Fire Rating: UL 10C 3-hour, single doors up to 4' x 8'
- Door thickness: 1-3/4" to 2-1/4" thick, preset for 1-3/4" door
- Application: Through door thru-bolting
- Door prep: Standard ANSI A156.115 (161) for cylindrical locks
- Backset: 2-3/4" standard, 2-3/8" optional
- Chassis: Heavy duty diecast, investment cast, chromated cold rolled steel and stainless steel mechanism; billet steel spindles for locking functions
- Front: 2-1/4" x 1-1/8", stainless steel or wrought brass, beveled 1/8" in 2"
- Strike: ASA standard; T-Strike or Full Lip Strike optional; stainless steel or wrought brass
- Levers: Philadelphia (SFL and LFL), Boston (SFL), Miami (SFL); solid diecast
- Rose: 3-3/8" DIA wrought brass, concealed screws
- Latchbolt: 1/2" throw for 2-3/8" backset, 9/16" throw for 2-3/4" backset
- Hand: Non-handed
- Lever rotation: 41 degree standard with 2-3/4" backset; 65 degree with 2-3/4" latch for double doors
- Keys: Two (2) per lock
Available Options
- Finish: 605 - Bright Brass, 606 - Satin Brass, 613E - Dark Oxidized Satin Bronze, 619 - Satin Nickel, 622 - Flat Black, 625 - Bright Chrome, 626 - Satin Chrome
- Lever Style: Philadelphia, Boston, Miami
- Cylinder: Conventional Cylinder, Less Cylinder, SFIC Prep with 6-Pin Core, SFIC Prep with 7-Pin Core, SFIC Prep, Less Core, SFIC Prep with Construction Core, SFIC Prep with Plastic Construction Core, Schlage LFIC Prep with Schlage Core, Schlage LFIC Prep, Less Core, Schlage LFIC Prep with Construction Core
- Also selected when ordering: Backset, Strike, Keyway, Keying, Tactile Abrasive Coating, Split Finishes, Lead-Lined Rose, Dust Box, Antimicrobial Coating, Request to Exit, Molex Connector, Weatherized Finish
Each configuration has its own PDQ part number, for example XGT182PHL605D.
Certifications
- UL listed for 3 hrs, for single doors up to 4'0" x 8'0"
- Certified to ANSI/BHMA A156.2, Grade 1
- California Education Code compliant (functions XGT135, XGT135LED, XGT145)
- Federal Specification FF-H-10C (superseded by A156.2)
- Approved for Florida HVHZ, PDQ Product Approval FL 21376, design load +/- 70.0 PSF for single door (3' x 7')
- Complies with ADA and ICC/ANSI 117.1
Typical Applications
- High-traffic exterior entries
- Stairwells
- Doors facing heavy abuse or vandalism risk
Frequently Asked Questions
What is the difference between the PDQ XGT and GT cylindrical locks?
Both are ANSI/BHMA Grade 1. XGT is rated for 3,000 lbf-in of lever torque resistance, about 4 times the ANSI/BHMA standard, versus 2,200 lbf-in for GT. XGT also uses a 13-gauge steel anti-rotation plate and is cycle tested to over 3 times BHMA standards.
Is the XGT lock fire rated?
Yes. XGT is UL listed for 3-hour fire doors on single doors up to 4'0" x 8'0", meeting UL 10C requirements.
What door thicknesses and backsets fit the XGT lock?
XGT fits doors 1-3/4" to 2-1/4" thick (preset for 1-3/4") with a 2-3/8" or 2-3/4" backset, and it is non-handed, so one unit installs on any door hand.
Manufacturer Resources
PDQ XGT Series Architectural Submittal Sheet
Product Specs
- Department:
- Door Hardware
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Product Type:
- Leverset
- Product Category:
- Mechanical Locks
- Product Model:
- XGT182
- Commercial/Residential:
- Commercial
- Series:
- XGT Series
- Grade:
- Grade 1
- ANSI/BHMA:
- F82
- Lock Function:
- Office / Entry
- Keyed:
- Yes
- Electronic:
- No
- Door Hand Direction:
- Non-Handed
- Warranty:
- Limited Lifetime
- Tags:
- pdq xgt182, xgt182 pdq, xgt182
- Subcategory:
- Cylindrical Locks
- Duty Level:
- Extra Heavy Duty
- Product Attribute:
- Cylindrical Locks
- Lock Type:
- Cylindrical
- Handle Type:
- Lever
- Product Function:
- Office / Entry
- Keyed Function:
- Single Cylinder
- Backset (Distance):
- 2-3/4"
- Standard Latch:
- 1/2" Throw
- Standard Strike:
- ASA standard
- Cylinder and Keyways:
- SCC standard (Schlage C compatible)
- Fire Rated:
- Yes
- ADA Compliant:
- Yes
PDQ XGT182PHL626D – Frequently Asked Questions
1) Will the PDQ XGT182 fit a 1-3/4 inch commercial door with a standard 161 prep?
Yes. The XGT182 cylindrical lever lock installs in the standard ANSI A156.115 (161) cylindrical prep and covers doors 1-3/4 inches up to 2-1/4 inches thick, shipped preset for 1-3/4 inches. Mounting is through-bolted. Standard backset is 2-3/4 inches, with a 2-3/8 inch backset available as an order option, so it drops into either of the two common bore layouts.
2) Do I need to specify a hand for the PDQ XGT182 office lock?
No handing to call out. The XGT182 is non-handed, so a single unit installs on a left or right hand door, inswing or outswing. For property managers stocking spares, that means one part number covers every opening in the building.
3) What does the Office / Entry F82 function actually do day to day?
The XGT182 is the ANSI/BHMA F82 Office / Entry function with a single cylinder. The outside lever is locked or unlocked by key, and the inside lever always retracts the latch for free egress. That is the usual choice for an office, classroom office, or tenant suite door someone wants to leave unlocked during business hours and key-lock at close.
4) Can the PDQ XGT182 go on a 3-hour fire rated stair door?
Yes. The XGT Series is UL 10C listed for 3-hour fire doors on single doors up to 4'0" x 8'0". It also complies with ADA and ICC/ANSI 117.1, which matters on egress and stair openings where the lever has to be operable without tight grasping.
5) Can I key the PDQ XGT182 into my existing Schlage, Best or Sargent master key system?
Yes, in most of the common systems. Keyed XGT locks take a Schlage C compatible conventional cylinder as standard, small format interchangeable cores compatible with Best, Falcon and Arrow, or Schlage large format IC cores (Philadelphia lever only for LFIC). Keyway choices run across Arrow AR1, Corbin 59A1, 60 and L4, Russwin D1, Schlage C, C-K and E, Sargent LA and RA-RC, Accentra (Yale) E1R and GA, Falcon E-R, Kwikset 5-pin, and PDQ's restricted TA. Keying can be ordered KD, 0-bitted, keyed alike, master keyed, master keyed to existing bittings, or construction master keyed.
6) Should I order the PDQ XGT or the GT cylindrical lock for a high-abuse entry?
Both are ANSI/BHMA A156.2 Grade 1, so the decision is abuse resistance. XGT holds 3,000 lbf-in of lever torque, roughly four times the BHMA requirement, against 2,200 lbf-in for GT, adds a 13-gauge steel anti-rotation plate, and is cycle tested to over three times BHMA standards. For a vandalism-prone exterior entry, stairwell, or school corridor, XGT is the one to spec; GT is adequate where the traffic is normal.
7) What do I have to specify when ordering a PDQ XGT182 lever lock?
Each configuration has its own part number, built like XGT182PHL605D. You pick lever style (Philadelphia, Boston or Miami), finish from 605 Bright Brass, 606 Satin Brass, 613E Dark Oxidized Satin Bronze, 619 Satin Nickel, 622 Flat Black, 625 Bright Chrome or 626 Satin Chrome, and the cylinder arrangement (conventional, less cylinder, SFIC prep with 6- or 7-pin core, SFIC less core, SFIC with construction core, or Schlage LFIC variants). Backset, strike, keyway and keying are also called out at order. Optional extras include dust box, lead-lined rose, tactile abrasive coating, split finishes, antimicrobial coating, request to exit, Molex connector, and weatherized finish.
8) Is the PDQ XGT182 approved for coastal Florida hurricane zone openings?
Yes. The XGT Series is approved for the Florida High Velocity Hurricane Zone under PDQ Product Approval FL 21376, with a design load of plus or minus 70.0 PSF on a single 3' x 7' door. For an exterior entry in that zone, order the 626 Satin Chrome weatherized finish option, which is the only finish the weatherized treatment is offered on.
9) Does the PDQ XGT182 work on a pair of doors?
It can, but the lever rotation changes. Standard rotation is 41 degrees with the 2-3/4 inch backset thanks to the 2:1 latch bolt throw, which cuts torque on the mechanism. For double doors, the 2-3/4 inch latch arrangement gives 65 degrees of lever rotation. Note the UL 3-hour fire listing is stated for single doors up to 4' x 8'.
10) Will the 3-3/8 inch rose on the XGT182 cover the marks left by my old lockset?
The rose is a 3-3/8 inch diameter wrought brass trim with concealed screws, and the face plate is 2-1/4 x 1-1/8 inches with the 2-3/4 inch backset (2-1/4 x 1 inch with the 2-3/8 inch backset), beveled 1/8 inch in 2 inches. On a standard 161 prep that rose covers the 2-1/8 inch bore with room to spare, which is usually enough to hide wear rings from a previous cylindrical lock in the same prep.
11) Does the PDQ XGT182 have any electrical function for access control?
The XGT182 itself is a mechanical lock, not an electrified one. Two low-voltage order options exist on the series: REX, a request-to-exit switch that signals when the inside lever is turned, and ISMC, an industry standard Molex connector for wiring. Neither makes it an electric lock, so if the opening needs remote unlocking you want an electrified function rather than this one.
12) Can I get the XGT182 for a hospital or X-ray room where I need lead lining and an antimicrobial surface?
Both are order options on the XGT Series. LL adds a lead-lined rose for radiology rooms, and AM applies antimicrobial coating to the inside and outside levers and roses, offered on 626 Satin Chrome only. A dust box is also available for the strike pocket. Tactile abrasive coating can be specified inside only, outside only, or both sides where a hazard-warning touch surface is required.
13) How many keys come with a PDQ XGT182 lock?
Two keys per lock on keyed XGT functions. If you are ordering a batch for one building, specify the keying option that fits: KD keyed different, KA2, KA4 or KA for keyed alike groups, MK master keyed, master keyed to existing bittings, or CMK construction master keyed. Ordering 0-bitted (OB) gets you two blank keys for a locksmith to pin on site.
How fast can I get the PDQ XGT182PHL626D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the PDQ XGT182PHL626D come with a warranty?
Absolutely. The PDQ XGT182PHL626D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the PDQ XGT182PHL626D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the PDQ XGT182PHL626D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.