Philips Lighting 913710251201 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$183.47
$133.47
Philips Lighting 913710251201 MARK 10 POWERLINE Dimmable Fluorescent Ballast for F32T8, 277V, Metal SC Housing

Philips Lighting 913710251201 MARK 10 POWERLINE Dimmable Fluorescent Ballast for F32T8, 277V, Metal SC Housing

(No reviews yet) Write a Review

Model: 913710251201
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$183.47
$133.47
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Philips Lighting 913710251201 MARK 10 POWERLINE Dimmable Fluorescent Ballast for F32T8, 277V, Metal SC Housing

The Philips Lighting MARK 10 POWERLINE VEZ2S32SC35I is a dimmable fluorescent ballast built for F32T8 lamps, delivering programmed start ignition and stable performance on a 277V, 60 Hz input. Housed in a durable metal SC-style enclosure, it powers two F32T8 lamps wired in series and is rated for outdoor use, backed by a CSA certificate and low 10% total harmonic distortion.

Key Features

  • Lamp Compatibility: Powers 2 F32T8 lamps per unit (32 W rated lamp power) in series connection.
  • Dimmable Ballast Factor: Ballast factor ranges from 0.05 (min) to 1 (max) for flexible dimming control.
  • Programmed Start Ignition: 1.5 s nominal ignition time supports extended lamp life.
  • Electrical Performance: 277V, 60 Hz input; 0.25 A nominal current; 0.99 power factor; input power from 15 W to 68 W.
  • Metal SC Housing, Outdoor Rated: Durable 9.5" x 1.7" x 1.18" metal housing with automatic restart, suitable for outdoor use.
  • Flexible Wiring: Supports remote, tandem, and through wiring, each with up to a 6' ballast-to-lamp distance.

Certifications & Compliance

  • CSA Certificate
  • FCC Consumer EMC Immunity Standard
  • Suitable for Outdoor Use

Technical Specifications

  • Ballast Type: Dimmable Fluorescent
  • Ballast Factor: 0.05 (min) – 1 (max)
  • Ignition: Programmed Start, 1.5 s nominal ignition time
  • Input: 277 V, 60 Hz, 0.25 A nominal current
  • Input Power Range: 15 W (min) – 68 W (max)
  • Power Factor (Nom): 0.99
  • Total Harmonic Distortion (USA): 10%
  • Lamp Type: F32T8, Series Connection, 2 Lamps per Unit, 32 W Rated Lamp Power
  • Housing: Metal, SC Type, 9.5" x 1.7" x 1.18"
  • Hum and Noise Level: A
  • Automatic Restart: Yes
  • T Case Maximum (Nom): 70°C
  • UL Recognized: No
  • Max Ballast-to-Lamp Distance: 6' (Remote, Tandem, and Through Wiring)

Typical Applications

  • Commercial and Industrial Fluorescent Lighting Fixtures
  • T8 Fixture Retrofits Requiring Dimmable Ballasts
  • Outdoor-Rated Fixture Installations
  • Series-Wired Two-Lamp F32T8 Fixtures
  • Remote, Tandem, or Through-Wired Fixture Configurations

Why Philips Lighting?

Philips Lighting builds the MARK 10 POWERLINE series with a durable metal housing, CSA certification, and a 0.99 power factor with low 10% total harmonic distortion for clean electrical performance. Programmed start ignition and automatic restart support long lamp life, while remote, tandem, and through wiring flexibility make this ballast a reliable choice for professional F32T8 fixture installations.

Manufacturer Resources

Product Specs

Approval Marks:
CSA certificate
Automatic Restart:
Yes
Ballast Factor Max :
1
Ballast Factor Min :
0.05
Ballast Type:
Dimmable Fluorescent
Base Model:
VEZ2S32SC
Color Input Terminals:
No terminals
Color Output Terminals:
No terminals
Connector Type:
No connector
Control Wire Gauge:
NA
Crestfactor Nom :
1.6
Ean Upc Product:
7.81087E+11
Emc Immunity Standard:
FCC Consumer
Housing Dimensions:
9.5" x 1.7" x 1.18"
Housing Material:
Metal
Housing Type:
SC
Hum And Noise Level:
A
Ignition Method:
Programmed Start
Ignition Time Nom :
1.5 s
Input Current Nom :
0.25 A
Input Frequency:
60 Hz
Input Power Max :
68 W
Input Power Min :
15 W
Input Voltage:
277 V
Lamp Connection:
Series
Lamp Type:
F32T8
Material Nr 12nc :
9.1371E+11
Max Ballast Lamp Distance Remote Wiring:
6'
Max Ballast Lamp Distance Tandem Wiring:
Any = 6'
Max Ballast Lamp Distance Through Wiring:
Any = 6'
Net Weight Piece :
432.000 g
Number Of Lamps:
2 piece/unit
Numerator Packs Per Outer Box:
10
Numerator Quantity Per Pack:
1
Order Code:
9.1371E+11
Order Product Name:
MARK 10 POWERLINE VEZ2S32SC35I
Power Factor Nom :
0.99
Rated Lamp Power:
32 W
Remote Wiring Configuration Allowed:
Yes
Suitable For Outdoor Use:
Yes
T Case Maximum Nom :
70 °C
Tandem Wiring Configuration Allowed:
Yes
Through Wiring Configuration Allowed:
Yes
Total Harmonic Distortion Usa:
10%
Ul Recognized:
No
Wire Gauge Nom :
18AWG mm
Wire Length By Color:
See data sheet
Wire Striplength:
0.50/0.375 mm
Wire Type:
Solid
Product Type:
Fluorescent Ballast
Department:
Electrical

Philips Lighting 913710251201 – Frequently Asked Questions

1) Will the Philips Mark 10 Powerline VEZ2S32SC35I run two F32T8 lamps on a 277V circuit?
Yes. The Mark 10 Powerline VEZ2S32SC35I is a two-lamp ballast for F32T8 lamps at 32W rated lamp power, and it is a 277V-only unit running at 60 Hz. Put it on a 120V branch circuit and it will not operate, so confirm the fixture is fed from a 277V leg before you swap it in.
2) Will this ballast fit the channel in my existing 2-lamp T8 troffer?
The metal housing measures 9.5 x 1.7 x 1.18 inches in an SC case style, which is the standard small-can footprint most 2x4 troffers and strip fixtures are built around. Measure the existing ballast and the channel opening before you pull the old one; if the fixture took a conventional 9.5 inch T8 ballast, this drops into the same space. The unit weighs 432 grams, about 15 ounces.
3) Does programmed start on this ballast actually extend lamp life on occupancy-sensor circuits?
That is what it is for. The VEZ2S32SC35I uses programmed start with a 1.5 second ignition time, which preheats the cathodes before striking the arc. On lighting that cycles hard, restrooms, stairwells, private offices on occupancy sensors, that preheat is the difference between getting rated lamp life and replacing lamps early. Instant start ballasts cost lamp life on every strike.
4) If one lamp fails in a two-lamp fixture using this ballast, does the other stay lit?
No. The lamps are wired in series, so a failed or missing lamp opens the circuit and both go dark. Parallel-wired ballasts keep the good lamp burning. If your maintenance model depends on a fixture staying partly lit until the next service round, a series ballast is the wrong choice, and either way replace lamps in pairs on these fixtures.
5) Can the Mark 10 Powerline VEZ2S32SC35I be used in an outdoor or unheated fixture?
It is rated suitable for outdoor use, in a weatherproof or damp-rated luminaire, with a maximum case temperature of 70 C at the T-case point. Watch the case temp in enclosed or gasketed housings on a hot roof, since that is where ballast life gets cut short.
6) How many of these ballasts can I put on one 277V circuit?
Work from 0.25 A nominal input current per ballast at 277V. Input power runs 68 W maximum at full output down to 15 W at the bottom of the dimming range. On a 20 A circuit at the usual 80 percent continuous load allowance, 16 A of capacity divided by 0.25 A lands around 64 ballasts, so the practical limit is usually the panel schedule and the dimmer's load rating rather than the ballast.
7) Will this ballast restrike on its own after a lamp is replaced or power is restored?
Yes, automatic restart is built in. Swap a lamp or bring the circuit back after an outage and the ballast re-ignites without anyone cycling the wall switch. That matters on high ceilings and in tenant spaces where nobody is standing at the switch after a relamp.
8) What wire gauge and strip length do the leads on this Philips ballast take?
The leads are 18 AWG solid conductor. Strip length is 0.50/0.375, and lead lengths by color are given on the Philips spec sheet linked with the product. Because the leads are solid rather than stranded, use push-in or wire-nut connections suited to solid conductor and avoid repeated re-bending at the ballast can.
9) Is the Philips 913710251201 sold individually or by the case?
Packaging is one ballast per pack, with 10 packs to an outer box. Order the exact unit as Philips MARK 10 POWERLINE VEZ2S32SC35I, base model VEZ2S32SC. Large relamp and retrofit jobs usually order in multiples of 10 to keep full cartons.
10) Will this ballast hum in a quiet space like a library or classroom?
Sound rating is A, the quietest class for fluorescent ballasts, which is what you want in libraries, classrooms, private offices, and exam rooms. Note that audible hum on dimmed fluorescent systems often comes from the dimmer or the fixture channel rather than the ballast itself.
How fast can I get the Philips Lighting 913710251201 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Philips Lighting 913710251201 come with a warranty?
Absolutely. The Philips Lighting 913710251201 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Philips Lighting 913710251201?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Philips Lighting 913710251201 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!