Plumbing Tools

Pasco 4555 PO Plug Wrench for Bathtub DrainsThe Pasco 4555 PO Plug Wrench is a purpose-built specialty tool for plumbers and contractors who need to install or remove PO plugs (pop-up drain plugs) on...

Pasco 4562 Internal Spud WrenchThe Pasco 4562 Internal Spud Wrench is a plumbing accessory tool built for the rough-in and service trade, designed to grip and turn internal spud nuts on toilets,...

Pasco 4568 Bibb-Seat Tool Set, 10-Piece KitThe Pasco 4568 Bibb-Seat Tool Set is a 10-piece kit of bibb-seat tools built for plumbers and maintenance techs who need to remove and reseat worn faucet...

Pasco 4571 Adjustable Spud WrenchThe Pasco 4571 Adjustable Spud Wrench is a rough-in plumbing hand tool built for tightening and loosening large slip-joint nuts, spuds, and other oversized fittings...

Pasco 4573-L Large Jaw Adjustable Basin WrenchThe Pasco 4573-L Large Jaw Adjustable Basin Wrench is a plumbing hand tool built for reaching and turning fasteners in the tight, hard-to-access spaces...

Pasco 4657 1" PVC Pipe Cutter for Rough-In PlumbingThe Pasco 4657 is a 1" PVC pipe cutter built for plumbers and contractors who need a fast, clean way to size plastic pipe on the job site before...

Pasco 4659 Big Yank Handle PullerThe Pasco 4659 Big Yank Handle Puller is a rough-in plumbing accessory built for pulling stubborn faucet and fixture handles free without damaging the stem, trim, or...

Pasco 4682 Soft Plastic Tubing CutterThe Pasco 4682 Soft Plastic Tubing Cutter is a hand tool built for plumbers and contractors who need a clean, square cut on soft plastic tubing during rough-in...

"Pasco 4801 Economy Test Plug for Plumbing Rough-InThe Pasco 4801 Economy Test Plug is a rough-in plumbing accessory used by plumbers and contractors to seal open pipe ends during drain-waste-vent...

Pasco 4914 3-in-1 Inspection Mirror, Magnetic Pickup & Pick ToolThe Pasco 4914 is a 3-in-1 combination tool built for plumbers and contractors who need a compact, multi-function accessory on the...

Pasco 4920 Telescoping Magnetic Retriever Tool, 10-PackThe Pasco 4920 Telescoping Magnetic Retriever Tool is a plumbing accessory built for the rough-in trade, giving plumbers and contractors a fast...

Pasco 4946 1/2" Heater Element Wrench, Plumbing Service ToolThe Pasco 4946 is a 1/2" heater element wrench built for plumbers and service technicians who need a reliable tool to remove and install...

Pasco 5/16" 80# Heavy Duty Torque Wrench (2S Series)The Pasco 5/16" 80# Heavy Duty Torque Wrench is part of the 2S Series torque wrench lineup, a family of rough-in plumbing hand tools available in...

Pasco 5100 Caulking Gun for Plumbing and Home ImprovementThe Pasco 5100 Caulking Gun is a manual applicator tool built for plumbing and home improvement professionals who need a reliable way to...

Pasco 7040 Cartridge Puller Tool for Moen FaucetsThe Pasco 7040 Cartridge Puller is a dedicated service tool built for plumbers and contractors who need to remove stuck or seized cartridges from...

SharkBite U702 Safe Seal Insertion Depth Gauge and Deburring ToolThe SharkBite U702 Safe Seal tool is a compact, all-in-one rough-in accessory built to support SharkBite push-fit fittings on copper,...

SharkBite U710 Push-Fit Disconnect Clip, DZR BrassThe SharkBite U710 Disconnect Clip is a push-fit accessory designed for use with SharkBite push-fit fittings, letting a plumber quickly un-install a...

SharkBite U711 DZR Brass Disconnect Tongs, Push-Fit Removal ToolThe SharkBite U711 Disconnect Tongs are a purpose-built removal tool for use with SharkBite push-fit fittings on copper, CPVC, or PEX...

SharkBite UIP21 PVC Disconnect Clip and Safe Seal Gauge ToolThe SharkBite UIP21 is an IPS (Iron Pipe Size) PVC Disconnect Clip built for plumbers and contractors who need to release SharkBite IPS...

SharkBite UIP714 1-in IPS PVC Disconnect & Gauge ToolThe SharkBite UIP714 1-in IPS PVC Disconnect & Gauge Tool is a dual-purpose rough-in tool used to release a SharkBite PVC fitting from schedule...

Sioux Chief 304-11 Ratcheting Tube Cutter for PEX, PVC and CPVC PipeThe Sioux Chief 304-11 is an economical ratcheting tube cutter built for plumbers and contractors who need a fast, reliable way to...

Sioux Chief 3041 Replacement Cutter Blade for 304-08 Pipe CutterThe Sioux Chief 3041 Replacement Cutter Blade is a direct-fit replacement blade for the Sioux Chief 304-08 pipe and tubing cutter,...

Sioux Chief 31110 Socket Wrench Set, 5-Piece with Turning BarThe Sioux Chief 31110 Socket Wrench Set gives plumbers and contractors a dedicated kit of five dual-size open-end wrenches plus a 5"...

Sioux Chief 390-50153 Inside Pipe Cutter with 1-9/16" Abrasive BladesThe Sioux Chief 390-50153 Inside Pipe Cutter is a rough-in hand tool built to cut plastic or steel pipe from the inside of the...