SharkBite UIP21 PVC Disconnect...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2.09
SharkBite UIP21 PVC Disconnect Clip and Safe Seal Gauge Tool

SharkBite UIP21 PVC Disconnect Clip and Safe Seal Gauge Tool

(No reviews yet) Write a Review

Model: UIP712

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2.09
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SharkBite UIP21 PVC Disconnect Clip and Safe Seal Gauge Tool

The SharkBite UIP21 is an IPS (Iron Pipe Size) PVC Disconnect Clip built for plumbers and contractors who need to release SharkBite IPS push-to-connect fittings from Schedule 40, 80, and 120 PVC pipe, as well as Schedule 40 and Schedule 80 CPVC pipe. Available in trade sizes from 1/2-in IPS to 3/4-in IPS to match the fitting you're working on, this lightweight, durable plastic tool releases the fitting at the white collar and doubles as a safe seal depth gauge, letting you mark the pipe to confirm the fitting has been inserted to the correct depth before the job is closed up. It's a simple rough-in accessory that speeds up disassembly and helps verify a proper connection on every install, whether you're sizing for 1/2-in or 3/4-in IPS fittings.

Key Features

  • Trade Size Range: Offered in 1/2-in IPS and 3/4-in IPS sizing to match SharkBite iron pipe size push-to-connect fittings for accurate fit and release.
  • Pipe Compatibility: Releases the white collar of a SharkBite IPS fitting installed on Sch. 40, 80, and 120 PVC pipe, plus Sch. 40 and Sch. 80 CPVC pipe.
  • Durable Construction: Lightweight, durable plastic construction stands up to repeated use on the job site without adding bulk to a tool pouch.
  • Fast Disassembly: The disconnect clip design allows fast, easy removal of push-to-connect fittings when a joint needs to be reworked or repaired.
  • Safe Seal Depth Gauge: Doubles as a depth gauge to mark the pipe end, confirming the fitting has been inserted to the proper safe seal depth for a secure connection.
  • Job-Site Ready: Compact size makes it easy to carry both the 1/2-in and 3/4-in versions for whichever fitting size a job calls for.

Technical Specifications

  • Trade Size: 1/2-in IPS and 3/4-in IPS options
  • Material: Plastic
  • Compatible Pipe: Sch. 40, 80, 120 PVC; Sch. 40, 80 CPVC
  • Packaging: 12 ea per package

Typical Applications

  • Removing or repositioning SharkBite IPS push-to-connect fittings during rough-in
  • Verifying safe seal insertion depth before pressure testing a system
  • Service and repair work on existing PVC or CPVC fitting connections
  • New construction and remodel plumbing installations using PVC or CPVC pipe
  • Field kits stocked with both 1/2-in and 3/4-in clips for mixed-size jobs

Why SharkBite?

SharkBite's push-to-connect system is built around fast, reliable installation, and the UIP21 disconnect clip is the companion tool that keeps that system serviceable in the field. Its durable plastic construction and dual-purpose design as both a release tool and a depth gauge give plumbers a straightforward way to disassemble fittings and confirm proper pipe insertion across both 1/2-in and 3/4-in IPS sizes, helping ensure every SharkBite IPS connection on PVC or CPVC pipe is made correctly the first time.

Manufacturer Resources

Product Specs

list_batch:
SHK-20260923
Product Type:
Disconnect Clip
Department:
Plumbing
Product Subgroup:
Pipe and Tubing
Product Material:
Plastic
Product Group:
Fitting

SharkBite UIP712 – Frequently Asked Questions

1) What size SharkBite disconnect clip do I need for 1/2-inch IPS PVC fittings?
Order the 1/2-in trade size, MPN UIP710. The SharkBite UIP21 clip is sized to the fitting, not the pipe schedule, so a 1/2-in IPS push-to-connect fitting needs the 1/2-in clip. The 3/4-in version is MPN UIP712. The clip releases the fitting at the white collar.
2) Will the SharkBite UIP21 clip work on CPVC pipe or only PVC?
Both. The UIP21 clip releases SharkBite IPS fittings installed on Schedule 40, 80, and 120 PVC, plus Schedule 40 and Schedule 80 CPVC.
3) Can I use this clip on SharkBite fittings installed on copper or PEX?
No. The UIP21 is the IPS (Iron Pipe Size) clip, intended for SharkBite IPS push-to-connect fittings on PVC and CPVC pipe. Copper and PEX connections use SharkBite's copper-tube-size fittings, which take a different disconnect clip sized to CTS.
4) How do I check that a SharkBite IPS fitting is pushed in far enough?
The clip doubles as a safe seal depth gauge. Hold it against the pipe end and mark the pipe at the gauge, then push the fitting on until it reaches the mark. If the mark disappears into the fitting, you have full insertion depth. Useful to do before pressure testing, since a shallow insertion is the usual cause of a leak at a push-fit joint.
5) Do I have to cut the pipe to remove a SharkBite IPS fitting?
No, and that is the point of the clip. Slip the UIP21 over the pipe against the fitting's white collar to release the grip ring, and the fitting pulls off so the joint can be reworked, repositioned, or the fitting reused. Saves cutting back and adding a coupling during rough-in changes.
6) Is the SharkBite UIP21 sold individually or in a pack?
Packaging is 12 each per package, so a single order line gives a crew enough clips to spread across trucks and tool pouches. Sizes are ordered separately: 1/2-in or 3/4-in.
7) Should I stock both the 1/2-inch and 3/4-inch clips on the truck?
If the job mixes 1/2-in and 3/4-in IPS fittings, yes. Each clip only fits its own trade size, and both are compact plastic tools that add almost nothing to a pouch. For a service van covering repair work on existing PVC and CPVC lines, carrying UIP710 and UIP712 together covers every IPS fitting in the 1/2 to 3/4 inch range.
8) What is the SharkBite UIP21 made of, and will it hold up to repeated use?
It's molded plastic, built for repeated release and gauging work on the job site. Plastic keeps it light and non-marring on the fitting collar, but it is a hand tool, not a pry bar: the clip works by squeezing the white release collar, not by levering the fitting off the pipe.
How fast can I get the SharkBite UIP712 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the SharkBite UIP712 come with a warranty?
Absolutely. The SharkBite UIP712 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the SharkBite UIP712?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the SharkBite UIP712 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!