RCI 6514 Electric Strike with ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$219.00
$154.42
RCI 6514 Electric Strike with 4-7/8" Square Corner Faceplate for Cylindrical and Mortise Locks

RCI 6514 Electric Strike with 4-7/8" Square Corner Faceplate for Cylindrical and Mortise Locks

(No reviews yet) Write a Review

Model: S6514 32D
From the 6 Series Collection

In Stock (leaves warehouse same day if ordered before 3pm ET)

$219.00
$154.42
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

RCI 6514 Electric Strike with 4-7/8" Square Corner Faceplate for Cylindrical and Mortise Locks

Heavy-Duty Electric Strike with Field-Selectable Operation

The RCI 6514 electric strike combines professional-grade performance with installation flexibility for commercial access control applications. This 6 Series centerline strike features a standard profile design that accommodates 3/4" latch projections and includes a 4-7/8" square corner faceplate. With field-selectable 12/24VDC operation at 375mA and 1/4" horizontal adjustment capability, the 6514 delivers reliable security with 1,500lbf static strength and 500,000 cycle durability rating.

Professional Features & Benefits

  • Latch Compatibility: Standard profile accommodates 3/4" (19mm) latch projections for versatile lock compatibility with cylindrical and mortise systems.
  • Heavy-Duty Performance: Rated for 1,500lbf static strength and 500,000 operational cycles for long-term reliability in high-traffic commercial applications.
  • Field-Selectable Operation: 12/24VDC and 12-24VAC compatibility with fail-secure and fail-safe modes configurable without tools for flexible system integration.
  • Installation Efficiency: 1/4" (6.4mm) horizontal adjustment and plug-in wire connectors reduce installation time and simplify field wiring.
  • Professional Construction: Non-handed design with included trim plate to cover irregular frame cut-outs for clean, professional installations.
  • Multi-Voltage Capability: Single solenoid design operates at 375mA (at 12VDC) with field-selectable voltage options for system compatibility.
  • Grade 1 Certification: UL 294 Listed and UL 1034 Burglary-Resistant Listed with ANSI/BHMA A156.31 Grade 1 certification for commercial security applications.

Technical Specifications

  • Standard profile accommodates 3/4" (19mm) and Low-profile accommodates 1/2" (12.7mm) or 5/8" (16mm) latch projections
  • 1/4" (6.4mm) horizontal adjustment
  • Plug-in wire connectors
  • Trim plate included to cover up irregular frame cut-out
  • Non-handed
  • 375mA Field-Selectable 12/24VDC, 12-24VAC (At 12VDC)
  • 1,500lbf Static 70ft-lb Dynamic (04 & 14 faceplates only. Grade 2, 1,000lbf static for 05, 07 & 08 faceplates)
  • 500,000 Cycles (04 & 14 faceplates only. Grade 2, 1,000lbf static for 05, 07 & 08 faceplates)
  • Field-Selectable Fail-Secure & Fail-Safe
  • Optional Latch & Keeper Monitor Models Available

Installation & Operation

  1. Verify electrical requirements match available power supply. Confirm 12/24VDC or 12-24VAC voltage and 375mA current capacity before proceeding.
  2. Disconnect power supply before beginning installation. Follow all applicable electrical codes and safety procedures.
  3. Mount the unit in the specified location ensuring adequate clearance for wiring access, ventilation, and future service requirements.
  4. Route and connect wiring according to manufacturer wiring diagrams. Use appropriate wire gauge and connectors for the application.
  5. Configure operational settings including fail-secure/fail-safe mode per application requirements using field-selectable options.
  6. Restore power and test all functions including normal operation, latch engagement, and integration with connected access control systems.
  7. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

  • Commercial Building Security Systems
  • Retail Loss Prevention
  • Healthcare Facility Access Control
  • Educational Institution Safety Systems
  • Industrial Facility Monitoring
  • Office Building Entry Control
  • Multi-Tenant Residential Access Systems

Why Choose RCI Quality?

RCI electric strikes deliver professional-grade reliability with heavy-duty construction rated for 1,500lbf static strength and 500,000 operational cycles. UL 294 Listed and ANSI/BHMA A156.31 Grade 1 certified for demanding commercial applications where dependable access control performance is essential. The 6 Series combines multiple installation conveniences including horizontal adjustment and plug-in connectors to reduce installation time while maintaining superior security performance.

Product Specs

Series:
6 Series
Features:
Plug-in Wire Connectors; 1/4" Horizontal Adjustment; Standard Profile Accommodates 3/4" and Low-Profile Accommodates 1/2" or 5/8" Latch Projections; Non-Handed
Latch Throw:
3/4"
ADA Compliant:
No
Static Strength:
1500
Product Group:
Electronic Access Controls
Product Subgroup:
Electric Strikes
Product Type:
Electric Strike for Cylindrical and Mortise Locks
UL Listing Type:
UL 294 Listed, UL 1034 Burglary-Resistant Listed, Certified to ANSI/BHMA Standard A156.31, Grade 1
Subcategory:
Electric Strikes
Commercial/Residential:
Commercial
Compatibility:
Cylindrical Locks, Mortise Exit and Latch Locks
Fail-safe / Fail-secure:
Field Selectable
Lock Type:
Mortise or Cylindrical
Tags:
rci 6514, rci door strike
Collection:
6 Series
Product Voltage:
12/24 VAC/DC
Face Plate:
4-7/8"
Fire Rating:
No
Product Category:
Electronic Access Controls
Department:
Door Hardware

RCI S6514 32D – Frequently Asked Questions

1) Do I need to specify handing for the RCI 6514 strike?
No handing to specify. The 6514 is non-handed, so the same unit goes into a left or right hand opening. That is one less thing to get wrong on a multi-door order, and it means one spare on the shelf covers every door in the building.
2) Is the RCI 6514 fail-safe or fail-secure?
Either one. Fail-safe and fail-secure are field selectable on the 6514, set at the strike without swapping parts, so an egress door that has to release on a power drop and a storeroom door that has to stay locked can both be covered by the same part number. Decide per opening at install time based on your local egress requirements.
3) What voltage and current does the RCI 6514 electric strike draw?
Field-selectable 12 or 24 volts, and it takes AC or DC, so it runs off 12/24VDC or 12-24VAC. Draw is 375mA at 12VDC. Size the power supply against that figure times the number of strikes on the circuit, and remember the current falls when you run it at 24V. Because voltage is selected in the field, the same strike drops onto a 12V panel or a 24V panel.
4) Is the RCI 6514 strike strong enough for a main entrance or a high traffic commercial door?
It is rated 1,500 lbf static with 70 ft-lb dynamic and 500,000 cycles, and it is certified to ANSI/BHMA A156.31 Grade 1. It is also UL 294 Listed for access control and UL 1034 Listed as burglary-resistant. That combination is what a spec on a commercial entry, a healthcare corridor, or a school door normally calls for.
5) Can I put the RCI 6514 electric strike on a fire rated door?
No. The 6514 is not fire rated, so keep it on non-rated openings. A fire door assembly needs a strike listed for fire door use, paired with a positive-latching lock, or the label on the assembly is void. For rated openings, specify a fire-rated electric strike model instead of this one.
6) Will the RCI 6514 cover the old cutout when I replace an existing strike in a metal frame?
Usually, yes. The 4-7/8 inch square corner faceplate is the common ANSI strike prep size, and a trim plate is included to hide an irregular or oversized frame cut-out left by the previous hardware. You also get 1/4 inch (6.4mm) of horizontal adjustment to line the keeper up with the latch after the frame is already drilled, which is what saves the job when the old prep is off by a hair.
7) What do I have to specify when ordering an RCI 6514 strike?
Two choices. First the profile, Standard for a 3/4 inch latch projection or Low Profile for 1/2 inch or 5/8 inch. Second, whether you want the latch and keeper monitor (LM/KM) built in or no monitor switch at all. Voltage, fail-safe versus fail-secure, and handing are not order decisions, they are set in the field or not applicable.
8) How do I get door position and latch status back to the access control panel with the RCI 6514?
Order it with the LM/KM option. That adds a latch monitor and keeper monitor, giving the panel a contact that reports whether the latch is actually in the keeper and whether the keeper has been released. If you only need to unlock the door and are getting status from a separate door contact, the no-monitor version is the one to buy. This has to be chosen up front, it is not a field add.
9) What is the difference between an electric strike like the RCI 6514 and an electromagnetic lock for a commercial door?
The 6514 replaces the strike in the frame and works with the mechanical lock you already have, cylindrical or mortise, so the door still latches and the lever or key side keeps working when the system is down. A maglock replaces the latching entirely and holds the door shut by magnet alone, which means it always releases on power loss. Pick the strike when you want the door to stay positively latched and you want to keep the existing lockset. It is a commercial-duty unit, not a residential one.
10) Can I standardize on the RCI 6514 across a whole building of different doors?
To a large extent. One part number covers left and right hand doors because it is non-handed, covers 12V and 24V panels because voltage is field-selectable, and covers both fail-safe and fail-secure openings because the mode is set in the field. What still varies door to door is the latch projection, Standard profile for 3/4 inch and Low Profile for 1/2 or 5/8 inch, and whether that opening needs the LM/KM monitor. Fire rated openings fall outside it entirely, since the 6514 is not fire rated.
11) Does the RCI 6514 need special wiring or a junction box at the frame?
Wiring is plug-in. The 6514 uses plug-in wire connectors, so the strike lands on a connector rather than needing terminations made up inside the frame pocket, which cuts the time an electrician spends on the ladder. Route power per the wiring diagram, set the voltage and the fail-safe or fail-secure mode before you close it up, then test latch engagement with the panel live.
How fast can I get the RCI S6514 32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the RCI S6514 32D come with a warranty?
Absolutely. The RCI S6514 32D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the RCI S6514 32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the RCI S6514 32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!