You may also like
ROCKWOOD 107 x 70C Pull Pates
Material: Stainless steel;
Finishes: US32D;
Fastner:#6 x 5/8" OH SMS; 1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 1-3/4" door);
Options:
- Barrier Free available in 21/2" clearance — use BF prefix when ordering (BF102 x 70C)
- Advise if door thickness is other than 1-3/4"
- See page B13 for mounting selection (standard duty 1/4 - 20)
ROCKWOOD OVERVIEW
Rockwood products are normally used on all types of institutional buildings, offices, retail, educational, detention, sports facilities, hotel and restaurant, and finer residences.
ENVIRONMENTAL MANAGEMENT
ASSA ABLOY is commited to protecting the quality of the environment as well as the health and safety of its employees, customers, and the community. Please see our Environmental Health and Safety Policy for details on how we are dedicated to this commitment.
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Product Group:
- Door Trim and Accessories
- Fasteners:
- #6 x 5/8" OH SMS, 1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 1-3/4" door)
- Subcategory:
- Push and Pull Plates, Door Pulls
- Product Subgroup:
- Door Pulls, Push and Pull Plates
- Product Type:
- Push and Pull Plates
- ANSI/BHMA:
- ANSI A156.6, J405
- Commercial/Residential:
- Commercial
- Product Model:
- 107x70C
- (CTC) Center-to-Center:
- 8"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Stainless Steel
- Department:
- Door Hardware
Rockwood 107 X 70C US26D – Frequently Asked Questions
1) Will the Rockwood 107x70C pull plate mount on a 1-3/4 inch door?
The 107x70C ships set up for a standard 1-3/4 inch door. The pull mounts with 1/4-20 x 2-1/4 inch thru bolts and finish washers sized for that thickness, and the plate itself attaches with #6 x 5/8 inch oval head sheet metal screws. On anything thicker or thinner, the thru bolt length has to change, so the door thickness needs to be specified when the order is placed.
2) Is the Rockwood 107x70C pull plate rated to a commercial standard?
Yes. The 107x70C is built to ANSI A156.6, the BHMA standard for architectural door trim, under type number J405. It is a commercial grade item, not residential trim, which is what a spec writer or facilities buyer needs to see on the submittal.
3) What is a heavy duty alternative to the Rockwood 107x70C pull plate with the same 8 inch center-to-center pull?
The Ives 8303 heavy duty pull plate is offered with 8 inch or 10 inch center-to-center mounting, so its 8 inch setting matches the 8 inch center-to-center pull spacing of the Rockwood 107x70C. Both are pull plates rather than push plates, so the pull hole pattern is what a locksmith or contractor needs to confirm against the existing door prep before swapping one for the other.
4) Which pull plate should I use if the door prep has a shorter center-to-center pull than 8 inches?
The Trimco 1010 series cast pull plate uses a 5 inch center-to-center pull, and the Trimco 1012 cast tapered and Trimco 1013 round pull plates both use a 5.5 inch center-to-center pull. The Trimco 1014 series half-round pull plate uses a 6 inch center-to-center pull. Any of those covers an opening drilled tighter than the 8 inch center-to-center spacing of the Rockwood 107x70C.
5) Can I use the Rockwood 107x70C pull plate on a door with a Detex Value Series exit device?
Detex builds the P/PN series pull plate specifically for its Value Series exit devices, so that pairing is the one matched to the device trim. The Rockwood 107x70C is a general commercial pull plate mounted with #6 x 5/8 inch OH SMS or 1/4-20 x 2-1/4 inch thru bolts and finish washers for a standard 1-3/4 inch door, and it is not built around an exit device trim pattern.
6) Which finishes does the Rockwood 107 pull plate come in, and will they match the rest of my door hardware?
Four finishes: 605 bright brass, 613 oil-rubbed satin bronze, 626 satin chrome, and 630 satin stainless steel. For a building already standardized on satin stainless commercial trim, 630 is the match. 626 satin chrome is the one to pick where the levers and closers are brass-base satin chrome, since the two look close but are different base metals and finish numbers.
7) Is the Rockwood 107x70C stainless steel or plated?
Stainless steel is the base material. In the 630 satin stainless option that means the finish is the metal itself, so scratches and cleaning chemicals do not expose a different substrate underneath. That matters on high traffic entries and in healthcare or food service where the plate gets wiped down daily.
8) Should I order a pull plate or a push plate for my door?
A pull plate like the 107x70C carries a grip and goes on the pull side of the opening; a push plate is flat with no hardware and goes on the swing side. Most single doors get one of each. If you want the pair to match at 4 by 16 inches, Delaney sells both shapes in that size, a 4 by 16 pull plate and a 4 by 16 push plate.
9) What is a decorative alternative to the Rockwood 107x70C pull plate?
Emtek offers push and pull plates in the Modern, Knoxville, and Petal patterns, the Petal being lost wax cast bronze. Those are styled sets for finer interiors, where the Rockwood 107x70C is a stainless steel commercial plate meeting ANSI A156.6 J405 and offered in 605 bright brass, 613 satin bronze oil-rubbed, 626 satin chrome, and 630 satin stainless steel.
10) Which pull plate has through bolt mounting like the Rockwood 107x70C?
The Ives 8302 is a heavy duty pull plate with through bolt mounting. The Rockwood 107x70C ships with 1/4-20 x 2-1/4 inch thru bolts and finish washers sized for a standard 1-3/4 inch door, plus #6 x 5/8 inch OH SMS. Through bolting is what holds up on a high traffic pull side, so either part suits an opening where surface screws have pulled out before.
How fast can I get the Rockwood 107 X 70C US26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Rockwood 107 X 70C US26D come with a warranty?
Absolutely. The Rockwood 107 X 70C US26D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Rockwood 107 X 70C US26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Rockwood 107 X 70C US26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.