You may also like
ROCKWOOD 122 x 70 Pull Pates
Material: Stainless steel;
Finishes: US32D;
Fastner: #6 x 5/8" OH SMS; 1/4 - 20 x 21/4" thru bolt & finish washer
(standard 13/4" door);
Options:
- Advise if door thickness is other than 1-3/4"
- See page B13 for mounting selection (standard duty 1/4- 20)
- Heavy bevel available, specify HVBEV
ROCKWOOD OVERVIEW
Rockwood products are normally used on all types of institutional buildings, offices, retail, educational, detention, sports facilities, hotel and restaurant, and finer residences.
ENVIRONMENTAL MANAGEMENT
ASSA ABLOY is commited to protecting the quality of the environment as well as the health and safety of its employees, customers, and the community. Please see our Environmental Health and Safety Policy for details on how we are dedicated to this commitment.
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Product Group:
- Door Trim and Accessories
- Fasteners:
- #6 x 5/8" OH SMS, 1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 1-3/4" door)
- Subcategory:
- Push and Pull Plates, Door Pulls
- Product Subgroup:
- Door Pulls, Push and Pull Plates
- Product Type:
- Push and Pull Plates
- ANSI/BHMA:
- ANSI A156.6, J405
- Commercial/Residential:
- Commercial
- Product Model:
- 122x70B
- (CTC) Center-to-Center:
- 6"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Stainless Steel
- Department:
- Door Hardware
Rockwood ROC-122x70B-US32D – Frequently Asked Questions
1) Will the Rockwood 122x70B pull plate fit a 1-3/4 inch door?
Yes. The 122x70B ships with #6 x 5/8 inch oval head sheet metal screws plus 1/4-20 x 2-1/4 inch thru bolts and finish washers sized for a standard 1-3/4 inch door. If your door is any other thickness, the thru bolt length has to be specified differently when ordering, since the supplied 2-1/4 inch bolts won't land correctly on a thicker or thinner leaf.
2) What are the alternatives to the Rockwood 122x70B if I need a different pull spacing?
Center spacing is where these differ. The 122x70B is 6 inch CTC. The Trimco 1014 Series half-round pull plate is also 6 inch CTC, the Trimco 1010 cast pull plate is 5 inch, and the 1012 tapered and 1013 round are 5.5 inch. For wider spacing, the Ives 8303 heavy duty pull plate is offered in 8 or 10 inch centers.
3) I need a pull plate with wider center-to-center spacing than 6 inches - what should I look at?
The Rockwood 122x70B is fixed at 6 inch center-to-center. For a wider grip, the Ives 8303 heavy duty pull plate is offered with 8 inch or 10 inch center-to-center mounting. That changes the hole pattern in the door, so it is a new-prep choice rather than a drop-in over a 6 inch layout.
4) Is the Rockwood 122x70B suitable for a high traffic commercial entrance?
It's built as commercial door hardware in stainless steel and conforms to ANSI A156.6, type J405. Stainless holds up to the hand oils, cleaners, and constant contact you get on school, hospital, hotel, and office openings, which is the traffic Rockwood trim is normally specified for.
5) What finish does the Rockwood 122x70B come in, and will it match my other satin stainless trim?
It comes in one finish, 630 satin stainless steel (US32D). That's the standard commercial satin stainless used across push plates, kick plates, hinges, and exit device trim, so it matches a building already standardized on 630 without a special order.
6) Can I get the Rockwood 122x70B with a beveled edge?
A heavy bevel version is available, ordered by specifying HVBEV. Standard mounting is the 1/4-20 standard duty setup; if you need a different mounting arrangement, that gets called out at order time rather than changed in the field.
7) Do I need a matching push plate on the other side of the door?
The 122x70B is the pull side only, so a pair of doors or a push/pull opening needs a separate push plate on the swing side. Delaney offers a 3-1/2 by 15 inch push plate that matches this plate footprint, and there are 4 by 16 inch push and pull plates in the same Delaney range if you want a larger plate on both faces.
8) For a high-traffic opening, how does the Rockwood 122x70B compare to heavy duty pull plates?
The Rockwood 122x70B is stainless steel and ships with 1/4-20 by 2-1/4 inch through bolts and finish washers for a standard 1-3/4 inch door, so it can be through-bolted rather than screwed only. Pull plates rated heavy duty include the Ives 8302 and Ives 8303, and the Trimco 1010, 1012, and 1013 cast plates. All are through-bolt style commercial plates; the difference is pull profile and spacing rather than mounting method.
9) Can I use the Rockwood 122x70B on a door with a Detex exit device?
The Detex P/PN Series pull plate is built specifically for Detex Value Series exit devices and matches that device's prep. The Rockwood 122x70B is a general-purpose straight pull plate with 6 inch center-to-center and its own through-bolt pattern, so on a Detex-equipped opening the device-specific plate is the safer match unless you are drilling fresh.
10) Is there a larger plate than the Rockwood 122x70B's 3-1/2 by 15 inch size to cover old fastener holes?
Yes. The Delaney 4 by 16 inch door pull plate is a half inch wider and an inch longer than the Rockwood 122x70B's 3-1/2 by 15 inch plate, which gives you more margin to hide previous prep. The Delaney 3-1/2 by 15 inch pull plate matches the Rockwood footprint exactly if you want to keep the same outline.
11) What is a decorative alternative to the Rockwood 122x70B for a hospitality or high-end entry?
The Rockwood 122x70B is a plain stainless steel plate with a straight pull, built to ANSI A156.6 J405 for commercial use. For a more ornamental look, Emtek offers the Knoxville, Modern, and lost wax cast bronze Petal push and pull plate sets. Those are styled sets rather than the utilitarian stainless plate.
12) What looks like a substitute for the Rockwood 122x70B but is not?
Push plates are the common mix-up. The Delaney 3-1/2 by 15 inch push plate has the same plate size as the Rockwood 122x70B but no pull on it, so it will not serve the pull side of an opening. Same for the Delaney 4 by 16 inch push plate. If you need a grip, stay with a pull plate such as the Delaney 3-1/2 by 15 inch pull plate or the Trimco 1014.
13) Is the Rockwood 122x70B right for a residential front door?
It's a commercial stainless plate in satin stainless, so it reads as institutional trim. For a residence where the look matters more than the traffic rating, Emtek's Knoxville, Modern, or lost wax cast bronze Petal push and pull plates are decorative alternatives.
How fast can I get the Rockwood ROC-122x70B-US32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Rockwood ROC-122x70B-US32D come with a warranty?
Absolutely. The Rockwood ROC-122x70B-US32D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Rockwood ROC-122x70B-US32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Rockwood ROC-122x70B-US32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.