Rockwood BF167 Barrier Free 45...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$235.93
Rockwood Rockwood BF167 Barrier Free 45-Degree Offset Door Pull, 10" CTC ROC-BF167-US32D

Rockwood BF167 Barrier Free 45-Degree Offset Door Pull, 10" CTC

(No reviews yet) Write a Review

Model: ROC-BF167-US32D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$235.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
ROCKWOOD BF167 45�� Offset Door Pulls

Material: Aluminum, brass, bronze, stainless steel;

Finishes: Available in standard architectural finishes;

Fastner: 1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 1-3/4" door);

Features: Recommended for ADA openings;

Options:

  • Back to back mounting in pairs — use BTB suffix and mounting type number (BF166BTB16)
  • Concealed mounting single pulls — use C suffix and mounting type number (BF166C17)
  • Advise if door thickness is other than 1-3/4"
  • Heavy duty versions of most fastening types available — use suffix HD to fastening type number (BF166BTB16HD)
  • See page B27 for mounting selection (standard duty 1/4 - 20)
  • Use Y prefix (YBF16) when ordering pulls with base plates, Y plate diameter is 1-1/4"; recommended for use on wood and glass doors
 
ROCKWOOD OVERVIEW
 
Rockwood products are normally used on all types of institutional buildings, offices, retail, educational, detention, sports facilities, hotel and restaurant, and finer residences.
 
ENVIRONMENTAL MANAGEMENT

ASSA ABLOY is commited to protecting the quality of the environment as well as the health and safety of its employees, customers, and the community. Please see our Environmental Health and Safety Policy for details on how we are dedicated to this commitment.

 
 
RESOURCES & DOWNLOADS

Rockwood full line catalog

Manufacturer Resources

Product Specs

Subcategory:
Push and Pull Plates, Door Pulls
Product Group:
Door Trim and Accessories
Clearance:
2-1/2"
Fasteners:
1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 1-3/4" door)
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
ANSI/BHMA:
ANSI A156.6, J402
Commercial/Residential:
Commercial
Hang Type:
Offset Hung
Product Model:
BF167
(CTC) Center-to-Center:
10"
Product Projection:
3-1/2"
Product Category:
Door Trim and Accessories
Product Substrate:
Aluminum, Brass, Bronze, Stainless Steel
Department:
Door Hardware

Rockwood ROC-BF167-US32D – Frequently Asked Questions

1) Will the Rockwood BF167 offset pull work on a 1-3/4 inch commercial door?
Yes. The BF167 ships with 1/4-20 x 2-1/4 inch thru bolts and finish washers sized for a standard 1-3/4 inch door. If your door is a different thickness, that has to be specified when the order is placed so the correct bolt length comes with the pull.
2) Does the Rockwood BF167 door pull meet ADA requirements for hand clearance?
It is built for barrier free openings and gives 2-1/2 inches of clearance between the grip and the door face, with a 3-1/2 inch total projection. The 45 degree offset lets a user pull with a closed fist or forearm rather than a tight grasp, which is the reason this style gets specified on ADA openings.
3) What standard does the Rockwood BF167 pull comply with?
The BF167 is listed to ANSI A156.6, type J402. That is the architectural door trim standard an institutional or government spec writer will be checking against on a submittal.
4) How far apart are the mounting holes on the BF167, and will they line up with my existing pull prep?
Center to center is 10 inches. If the door already has two thru-bolt holes at 10 inch centers from a previous pull, the BF167 drops onto the same prep. Anything other than 10 inch centers means new holes or a different CTC.
5) What is the closest cross-brand equivalent to the Rockwood BF167 45-degree offset pull?
The Ives 8145EZHD is the nearest match in another line - it is a 45 degree offset door pull described as ADA compliant and supplied with heavy duty mounting hardware. The Rockwood BF167 is also a 45 degree offset pull recommended for ADA openings, with 10 inch center-to-center, 2-1/2 inch clearance and 3-1/2 inch projection, mounted with 1/4-20 x 2-1/4 inch thru bolts and finish washers for a standard 1-3/4 inch door. The difference to confirm before you swap is the center-to-center dimension and projection against your existing bolt holes.
6) If a straight pull works better on my opening than an offset one, what should I order instead?
The Rockwood BF167 is an offset hung pull, so the bar sits away from the door face on an angled return. If the opening calls for a straight bar instead, the Ives 8103HD is a heavy duty straight door pull with a 1 inch round bar and through bolt mounting, and the Ives 8102HD is a heavy duty straight pull with a 3/4 inch round bar and 1-1/2 inch clearance. The ABH AB3300 is another straight flat end pull with a 1.00 inch diameter grip. Straight pulls give less knuckle clearance than the BF167's 2-1/2 inch clearance, so check the hand clearance your opening needs.
7) Is a Deltana OHP620 offset pull an equivalent substitute for the Rockwood BF167?
Not for a standard commercial door. The Deltana OHP620 is an off-set handle pull supplied as a back-to-back set and is listed for a door thickness range of 1-1/8 inch to 1-3/8 inch. The Rockwood BF167 ships with 1/4-20 x 2-1/4 inch thru bolts and finish washers sized for a standard 1-3/4 inch door and is a commercial item carrying ANSI A156.6, J402. If your door is 1-3/4 inch thick, the OHP620 range does not cover it.
8) We are specifying to ANSI A156.6 on an institutional job - which offset pulls carry a stated standard?
The Rockwood BF167 is the one in the group with a published ANSI/BHMA designation: ANSI A156.6, J402, and it is a commercial-rated pull in aluminum, brass, bronze or stainless steel. Among the other offset pulls, the Ives 8145EZHD is identified as ADA compliant with heavy duty mounting and the Ives 8169 is a C style offset solid pull with a 1 inch diameter and heavy duty mounting. If the submittal requires an A156.6 type number on the schedule, the BF167 carries J402.
9) Can I get the BF167 mounted back to back on both sides of the door?
Yes, but it is an ordering choice, not something you convert later. Add the BTB suffix plus the mounting type number, for example BF166BTB16. For a single pull with the fasteners hidden, use the C suffix with the mounting type number instead, as in BF166C17.
10) What should I order for a wood or glass door instead of straight thru-bolting?
Use the Y prefix, which adds base plates at the pull ends. The Y plate diameter is 1-1/4 inches, and Rockwood recommends that configuration for wood and glass doors where you want the fastener load spread over a plate rather than a bare bolt head.
11) Is there a heavier duty version of this pull for a high traffic entrance?
Most fastening types on the BF167 are available in heavy duty by adding the HD suffix to the fastening type number, for example BF166BTB16HD. That is worth specifying on school, healthcare, and main entry openings where the pull gets hit constantly.
12) What is the difference between a 45 degree offset pull like the BF167 and a straight bar pull?
The offset angles the grip away from the door face, which is what gets you the 2-1/2 inch clearance for a fist or forearm on a barrier free opening. A straight pull like the ABH AB3300 or the Ives 8103HD runs parallel to the door and is the simpler choice where accessible operation is not the driver. ABH also makes the AB3310 offset flat end pull if you want an offset from another brand.
13) Our doors are thinner than 1-3/4 inch - is there an offset pull rated for that instead of the BF167?
The Rockwood BF167's standard fastener pack is 1/4-20 x 2-1/4 inch thru bolts and finish washers for a 1-3/4 inch door, and Rockwood asks that you advise if the door thickness is other than 1-3/4 inch. If you prefer a pull already listed for thinner stock, the Sure-Loc square long door pull is stated for 1/2 inch to 2-1/4 inch thick doors, and the Deltana OHP620 off-set handle pull covers 1-1/8 inch to 1-3/8 inch as a back-to-back set.
14) Can I pair the Rockwood BF167 with a push plate on the opposite side, and what plates work?
Yes - the BF167 is a pull only, mounted with 1/4-20 x 2-1/4 inch thru bolts and finish washers on a standard 1-3/4 inch door, so the push side is a separate item. The Trimco 1001-1 is a 3 inch by 12 inch heavy duty push plate, the Trimco 1041 is a half-round push plate at 8 inch by 16 inch, and the Trimco 1070 series offers classic push/pull plates at 3-1/2 inch by 15 inch. Match the finish to the BF167's 630 satin stainless steel if you want the pair to read the same.
15) What is the difference between the Rockwood BF167 and the Ives 8169 offset pull?
Both are offset pulls for commercial openings, but the geometry differs. The Ives 8169 is a C style offset solid pull with a 1 inch diameter bar and heavy duty mounting. The Rockwood BF167 uses a 45 degree offset return with 10 inch center-to-center, 2-1/2 inch clearance and 3-1/2 inch projection off the door face. A C style pull returns to the door at both ends in a squared C, while the 45 degree offset angles back, which changes the hand approach and the projection into the corridor.
16) I need a longer pull than 10 inch center-to-center for a glass or entry door - what are the options?
The Rockwood BF167 is fixed at 10 inch center-to-center, so for a longer grip look at the ABH AB3330 offset round end pull, which is offered with custom length options, or the Deltana SSPOBB24, a 24 inch back-to-back modern offset pull, and the Deltana SSPORBB24, a 24 inch back-to-back round offset pull. The Deltana SSP1210 is a 12 inch contemporary pull for single side mounting. Note the Rockwood BF167 is a commercial pull carrying ANSI A156.6, J402, which the longer decorative options do not state.
17) Is the Cal-Royal PUL-175 a substitute for the Rockwood BF167?
No - they do different jobs. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, in stainless steel; it mounts around a rim cylinder on the exterior of a night latch opening. The Rockwood BF167 is a 45 degree offset door pull with 10 inch center-to-center and 3-1/2 inch projection, intended as a general pull on ADA openings. If your door has a rim cylinder that needs a surrounding pull, the BF167 will not serve that prep.
18) What other offset pulls use through-bolt mounting like the Rockwood BF167?
The Rockwood BF167 ships standard with 1/4-20 x 2-1/4 inch thru bolts and finish washers for a 1-3/4 inch door, with concealed and back-to-back mounting available by suffix. Among the alternatives, the ABH AB7200 is a solid stainless steel flat end pull with through-bolt mounting, the Ives 8103HD is a straight pull with through bolt mounting, and the Sure-Loc round long door pull is offered with concealed or thru-bolt mounting. Through-bolting means the opposite face needs a matching pull, push plate or finish washer to close out the holes.
19) What material and finish does the Rockwood BF167 come in?
The BF167 body is made in aluminum, brass, bronze, or stainless steel depending on the finish specified, and the stocked configuration is 630 satin stainless steel. 630 is the workhorse finish on commercial openings, so it matches most existing push plates, hinges, and exit trim already in a building.
20) Does the Rockwood BF167 pull have a handing?
No handing to specify. The BF167 is an offset hung pull with a symmetrical 10 inch center to center mounting, so it installs the same on a left or right hand door. You only decide which face of the door it goes on and whether you want a matching pull back to back.
21) For a restroom door, is the Trimco 1035 a better choice than the Rockwood BF167?
They solve different problems. The Trimco 1035 Ultimate Restroom Pull is a heavy duty pull built specifically for restroom exit doors. The Rockwood BF167 is a general 45 degree offset pull recommended for ADA openings, with 10 inch center-to-center and 2-1/2 inch clearance, carrying ANSI A156.6, J402. If the door only needs a barrier free grip, the BF167 fits; if the specification calls out a dedicated restroom pull, the 1035 is the purpose-built item.
22) What is the difference between the flat end and round end offset pulls versus the Rockwood BF167?
End style is the main variable. The ABH AB3310 is an offset flat end pull for surface mount commercial use, and the ABH AB3330 is an offset round end pull with custom length options. The Rockwood BF167 is a 45 degree offset pull at 10 inch center-to-center with 3-1/2 inch projection and 2-1/2 inch clearance, offered in aluminum, brass, bronze or stainless steel. Flat ends give a squared visual termination at the door face; round ends soften it. Grip clearance is what matters for barrier free use, so compare that figure first.
How fast can I get the Rockwood ROC-BF167-US32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Rockwood ROC-BF167-US32D come with a warranty?
Absolutely. The Rockwood ROC-BF167-US32D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Rockwood ROC-BF167-US32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Rockwood ROC-BF167-US32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!