Sargent LCRX10XG7 Electromecha...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,747.10
$1,002.52
Sargent LCRX10XG7 Series - Electromechanical Field Selectable Fail Safe / Fail Secure 12 / 24 Volt DC Cylindrical Lever Lock Grade 1 with L Rose and ASA Strike Less Cylinder and Request to Exit

Sargent LCRX10XG7 Electromechanical Cylindrical Lever Lock with Field Selectable Fail Safe/Fail Secure 12/24V DC Operation

(No reviews yet) Write a Review

Model: LCRX10XG70LB26DLH
$1,747.10
$1,002.52
Selected Finish is
Selected Lever is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,747.10
$1,002.52
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sargent 10X-Line Grade 1 Electromechanical Cylindrical Lever Lock with Dual Voltage 12/24V DC Operation

Professional Grade 1 Electromechanical Access Control Solution

The Sargent 10X-Line electromechanical cylindrical lever lock delivers superior security performance with field selectable fail safe/fail secure operation and dual voltage 12/24V DC capability. This Grade 1 lock features L rose design with ASA strike and request to exit functionality, engineered to exceed ANSI/BHMA requirements by up to 20 times for maximum reliability in high-traffic commercial applications. The innovative design prevents entry against more than 3,100 in-lb locked lever torque while maintaining smooth egress operation and withstands 1,600 lbs offset lever pull.

Professional Features & Benefits

  • Exceptional Torque Resistance: Prevents entry and maintains egress against more than 3,100 in-lb locked lever torque, exceeding ANSI/BHMA A156.2 requirements by 2.6 times for maximum security.
  • Superior Pull Resistance: Withstands 1,600 lbs offset lever pull (8x ANSI/BHMA A156.2 requirements) and continues to restrict entry for unmatched physical security performance.
  • Field Selectable Operation: 12/24V DC dual voltage capability with field selectable fail safe/fail secure configuration for flexible system integration and installation versatility.
  • Heavy-Duty Latch Performance: Ensures latch retraction with 100lb preload (2x ANSI/BHMA A156.2) while maintaining operation in warped doors or doors with latch bind conditions.
  • Extreme Impact Resistance: Prohibits entry after more than 100 vertical impacts, exceeding ANSI/BHMA A156.2 requirements by 20 times for superior vandal resistance.
  • Universal Cylinder Compatibility: Lockbody design supports all cylinder formats from fixed to interchangeable core, compatible with Degree, Signature, and KESO security key systems.
  • Innovative Push/Turn Design: Push/turn button design prevents damage from door stops and walls while providing reliable operation in high-traffic environments.
  • Optional Anti-Microbial Protection: Available with Microshield® antimicrobial coating for enhanced hygiene in healthcare and high-touch applications.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Installation & Operation

  1. Verify electrical requirements match available power supply. Confirm voltage (12V DC or 24V DC) and current capacity before proceeding.
  2. Disconnect power supply before beginning installation. Follow all applicable electrical codes and safety procedures.
  3. Mount the unit in the specified location ensuring adequate clearance for wiring access, ventilation, and future service requirements.
  4. Route and connect wiring according to manufacturer wiring diagrams. Use appropriate wire gauge and connectors for the application.
  5. Configure operational settings including fail-secure/fail-safe selection per application requirements.
  6. Restore power and test all functions including normal operation, request to exit functionality, and integration with connected systems.
  7. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

  • Commercial Building Security Systems
  • Healthcare Facility Access Control
  • Educational Institution Safety Systems
  • Government and Municipal Buildings
  • Industrial Facility Monitoring
  • Multi-Tenant Residential Properties
  • Emergency Exit Compliance

Anti-Microbial Option

Available with Microshield® antimicrobial coating for enhanced hygiene protection in healthcare facilities, schools, and other high-touch commercial applications where infection control is critical.

Why Choose Sargent Quality?

Sargent 10X-Line cylindrical lever locks deliver professional-grade reliability with rigorous testing that surpasses ANSI/BHMA requirements by more than 20 times, making it the strongest, most reliable cylindrical lock available. The innovative design provides maximum resistance to vandalism and malicious attacks with 3,100 in-lb torque resistance and 1,600 lbs pull resistance while maintaining smooth operation under extreme conditions. Engineered for demanding commercial applications where dependable performance and superior security are essential.

Product Specs

Series:
10X Line Series
Grade:
Grade 1
Product Group:
Electronic Locks
Product Subgroup:
Electrified Cylindrical Locks
Subcategory:
Electrified Cylindrical Locks
Commercial/Residential:
Commercial
Product Type:
Electronic Locks
Duty Level:
Heavy Duty
Electronic:
Yes
Product Category:
Electronic Locks
Department:
Door Hardware
Product Voltage:
12 or 24 VAC/DC
Fire Rating:
3 Hours {A}
Door Thickness Range:
1-3/4" to 2"

Sargent LCRX10XG70LB26DLH – Frequently Asked Questions

1) Will the Sargent 10X-Line electrified cylindrical lock fit a 2 inch thick door?
Yes. The 10X-Line electromechanical cylindrical lever lock covers doors from 1-3/4 inches up to 2 inches thick, so standard 1-3/4 inch commercial doors and thicker 2 inch doors are both within range. Anything thinner than 1-3/4 inches is outside what this lock is built for.
2) Do I have to order the Sargent LCRX10XG7 as fail safe or fail secure, or can I change it in the field?
The fail safe / fail secure mode is field selectable on this lock, so one unit can be set either way at install. That said, the ordering options are split into a Fail Safe and a Fail Secure selection, so pick the mode you intend to run. Fail safe unlocks when power drops (typical on egress paths tied to fire alarm release); fail secure stays locked and relies on mechanical key or RX egress.
3) What voltage power supply does the Sargent 10X electrified lever lock need?
It runs on 12 or 24 volts, DC, and the dual voltage capability is built in rather than being a separate model. Size the supply for the mode you choose: a fail safe lock draws continuously while locked, a fail secure lock draws only when released.
4) Can this Sargent electrified lock go on a fire rated door?
It carries a 3 hour {A} fire rating, which covers openings up to a 3 hour label. It is a Grade 1, heavy duty commercial lockset, so it suits stair doors, corridor cross-corridor doors and other rated openings in commercial and institutional buildings.
5) Does the Sargent LCRX10XG7 come with a cylinder?
No. It ships less cylinder, so you supply the cylinder and keying. The lockbody accepts all cylinder formats from fixed cylinder to interchangeable core, and it works with Sargent Degree, Signature and KESO security key systems, which makes it straightforward to bring onto an existing keyway or master key system in the building.
6) Do I need to specify handing when ordering the Sargent 10X electrified cylindrical lock?
Yes, handing matters. Each unit is built left hand or right hand, so determine the swing at the opening before ordering. You also choose the lever style (B, L or P) and the finish, which is 26D satin chrome over nickel.
7) Does this Sargent lock have a built-in request to exit signal for the access control panel?
Yes, request to exit is built into the lock, so turning the inside lever sends an RX signal back to the access control system. That lets the panel shunt the door contact on legitimate egress instead of logging a forced door. Run the RX conductors along with the power leads through the door loop or hinge transfer.
8) What strike comes with the Sargent 10X electrified cylindrical lock?
It is furnished with an ASA strike, the standard 4-7/8 inch commercial strike prep found in hollow metal frames. If your frame is prepped for a smaller T-strike or full lip strike, the frame will need to be reworked or the existing ASA cutout confirmed before install.
9) Will this lock hold up in a hospital or clinic where surfaces get wiped constantly?
It is offered with Microshield antimicrobial coating for healthcare, school and other high-touch environments, and the push/turn button design avoids the damage that pop-out buttons take from door stops and walls. It also resists entry after more than 100 vertical impacts, 20 times the ANSI/BHMA A156.2 requirement, which is what patient room and corridor doors actually see.
10) What finish does the Sargent 10X-Line electromechanical lever lock come in?
26D, satin chromium plated over nickel, across every lever and handing combination. That is the standard satin chrome look used on most commercial hollow metal openings, so it will match existing 26D closers, hinges and exit hardware in the same building.
How fast can I get the Sargent LCRX10XG70LB26DLH delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sargent LCRX10XG70LB26DLH come with a warranty?
Absolutely. The Sargent LCRX10XG70LB26DLH is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sargent LCRX10XG70LB26DLH?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sargent LCRX10XG70LB26DLH from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!