You may also like
SATCO Lighting S11390 4.5W MR16 LED, Silver Finish, 5000K, GU5.3 Base, 360 Lumens, 12V
4.5 Watt MR16 LED - Silver Finish - 5000K - GU5.3 Base - 360 Lumens - 12 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.375A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Housing Color:
- Gray
- Lamp Base:
- Bi Pin GU5.3
- Lamp Filament:
- LED
- Lamp Shape:
- MR16
- Lens Finish:
- Array
- Lens Material:
- Plastic
- Lensed:
- Yes
- Lumens:
- 360L
- Operating Frequency:
- 60Hz
- Product Type:
- MR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 35W
- Location Rating:
- Damp
- Base Material:
- Metal / Plastic / Electronic Components
- Product Voltage:
- 12V
- Beam Spread Angle:
- 15
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4.5W
- Product Weight:
- 0.08 lb
- Product Material:
- Metal / Plastic / Electronic Components
Satco Lighting S11390 – Frequently Asked Questions
1) What halogen MR16 wattage does this 4.5W Satco LED replace?
It is rated as a 35 watt incandescent equivalent, putting out 360 lumens on 4.5 watts. For a one-for-one swap of 35W halogen MR16 lamps in display or accent fixtures, the light output lines up; if you are replacing 50W halogens you will see a drop in brightness.
2) Is the 15 degree beam on this MR16 too narrow for general room lighting?
Yes, for general lighting it is. A 15 degree beam spread is a spot, meant for accenting artwork, merchandise, signage, or architectural features from a distance. For washing a room or covering a wide area you want a flood beam MR16 instead.
3) Is a 5000K MR16 going to match the other bulbs in my building?
The S11390 is fixed at 5000K, a cool daylight white, and it is not a color-selectable lamp. If your other fixtures are running 2700K or 3000K warm white, this one will read noticeably bluer next to them. For a facility standardizing on daylight color, it matches consistently at 80 CRI.
4) Can I dim the Satco S11390 MR16 LED?
Dimmable, yes. Keep in mind it runs at 12 volts through a transformer, so dimming performance depends on the transformer and dimmer combination in the circuit as much as on the lamp.
5) Can this MR16 LED go in a bathroom, covered exterior soffit, or other damp area?
It carries a damp location rating, so covered and enclosed areas that see humidity, such as bathrooms or covered porch soffits, are fine. Direct exposure to rain or spray is beyond a damp rating. Burning position is universal, so it can be aimed up, down, or horizontal.
6) How long does the Satco 4.5W MR16 LED last compared to the halogens we keep relamping?
Rated at 25,000 average hours. On a retail or hospitality schedule running 12 hours a day that is roughly five to six years between changes, which is the main reason facilities pull halogen MR16 lamps out of high fixtures and accent tracks.
7) Is this Satco MR16 DLC listed for a utility rebate?
No. The S11390 is not DLC approved, so it will not qualify for rebate programs that require a DesignLights Consortium listing. It is FCC compliant and is lawful for sale in California.
8) Is the face of this MR16 an open reflector or covered?
It is lensed, with a plastic lens over the LED array, so there is no exposed open reflector cup. The housing is gray with a silver finish, built from metal, plastic, and electronic components.
9) What is the exact part number and base type to order this Satco MR16 by?
Satco S11390: 4.5W MR16 LED, GU5.3 bi-pin base, 12V, 5000K, 360 lumens, 15 degree spot, silver/gray finish. That is the single configuration, so there is no finish or color temperature choice to specify when ordering.
How fast can I get the Satco Lighting S11390 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11390 come with a warranty?
Absolutely. The Satco Lighting S11390 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11390?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11390 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.