You may also like
SATCO Lighting S11392 4.5W MR16 LED, Silver Finish, 3000K, GU5.3 Base, 360 Lumens, 12V
4.5 Watt MR16 LED - Silver Finish - 3000K - GU5.3 Base - 360 Lumens - 12 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.375A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Housing Color:
- Gray
- Lamp Base:
- Bi Pin GU5.3
- Lamp Filament:
- LED
- Lamp Shape:
- MR16
- Lens Finish:
- Array
- Lens Material:
- Plastic
- Lensed:
- Yes
- Lumens:
- 360L
- Operating Frequency:
- 60Hz
- Product Type:
- MR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 35W
- Location Rating:
- Damp
- Base Material:
- Metal / Plastic / Electronic Components
- Product Voltage:
- 12V
- Beam Spread Angle:
- 40
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4.5W
- Product Material:
- Metal / Plastic / Electronic Components
- Product Weight:
- 0.08 lb
Satco Lighting S11392 – Frequently Asked Questions
1) What halogen MR16 does the Satco S11392 4.5W LED replace?
It replaces a 35 watt halogen MR16 at 4.5 watts, putting out 360 lumens. Draw is 0.375 amps at 12V, so a transformer that was carrying 35W halogen lamps has a lot of headroom, which matters if you are relamping a whole run on one magnetic transformer.
2) Is a 40 degree beam MR16 the right choice for retail display or accent lighting?
The S11392 has a 40 degree beam spread, which is a flood pattern. It washes a merchandise bay, artwork, or a seating area evenly rather than putting a tight punch on one object. If you want a defined pool of light on a single display piece or a sign, order a narrow spot MR16 instead, in the 15 to 25 degree range. Mixing the two in one track run is common: floods for general fill, spots for the feature.
3) Can I use the Satco S11392 MR16 in a covered exterior soffit or a bathroom?
Damp location rated, so covered exterior soffits, porch ceilings, bathrooms, and similar spots where the lamp sees humidity but no direct water are fine. Do not use it where it will take rain or spray, or in a fixture washed down for cleaning. Burning position is universal, so pointing it straight down or up makes no difference to lamp life.
4) Will 3000K match the MR16 lamps already installed in my building?
3000K is a warm white, the closest LED color to the halogen MR16s most low voltage track and recessed accent fixtures were originally lamped with. If your other heads are still halogen, this blends. If a previous crew relamped part of the building at 2700K or 4000K, it will read visibly different in the same sightline, so relamp a full room or run at once rather than one head at a time. Color rendering is 80 CRI. For retail apparel or anywhere color accuracy sells the product, specify a 90+ CRI MR16 instead.
5) How long will the Satco S11392 MR16 LED last before it needs changing?
Rated 25,000 hours. On a 12 hour retail day that is roughly 5.7 years of service, which is the number that matters if you are budgeting relamp labor on high ceilings or track that needs a lift. Halogen MR16 in the same socket typically ran a few thousand hours.
6) Does the Satco S11392 MR16 qualify for a DLC utility rebate?
No. The S11392 is not DLC listed, so it will not qualify on a rebate program that requires a DLC-listed product. It is FCC compliant. If a rebate is driving the specification on a commercial retrofit, confirm the program's qualifying product list before you commit to a lamp type.
7) Does the Satco S11392 have a glass lens or an open LED array?
It is lensed, with a plastic lens over the array and a gray housing. Two practical consequences: the lens diffuses the individual diodes so you do not get multiple shadows the way an open-array MR16 can produce, and the body is metal, plastic, and electronic components rather than the all-glass reflector of a halogen lamp. If your fixture has a tight lamp clip or a trim ring sized to glass halogen, check that the clip seats before you order a case.
8) Does the Satco S11392 MR16 come in other color temperatures or a 3-way version?
The S11392 is fixed at 3000K. It is not a CCT selectable lamp, so there is no field switch to change it to 2700K or 4000K, and it is not three-way. One finish is offered, gray. If you need a different color temperature, that is a different Satco part number, not an option on this one.
How fast can I get the Satco Lighting S11392 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11392 come with a warranty?
Absolutely. The Satco Lighting S11392 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11392?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11392 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.