You may also like
SATCO Lighting S11396 4.5W MR16 LED, Black Finish, 3000K, GU5.3 Base, 360 Lumens, 12V
4.5 Watt MR16 LED - Black Finish - 3000K - GU5.3 Base - 360 Lumens - 12 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.375A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Housing Color:
- Black
- Lamp Base:
- Bi Pin GU5.3
- Lamp Filament:
- LED
- Lamp Shape:
- MR16
- Lens Finish:
- Array
- Lens Material:
- Plastic
- Lensed:
- Yes
- Lumens:
- 360L
- Operating Frequency:
- 60Hz
- Product Type:
- MR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 35W
- Location Rating:
- Damp
- Base Material:
- Metal / Plastic / Electronic Components
- Product Voltage:
- 12V
- Beam Spread Angle:
- 40
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4.5W
- Product Material:
- Metal / Plastic / Electronic Components
- Product Weight:
- 0.08 lb
Satco Lighting S11396 – Frequently Asked Questions
1) What halogen wattage does this 4.5W MR16 LED replace?
It is rated as a 35W incandescent/halogen equivalent, drawing 4.5 watts and putting out 360 lumens. If you're replacing 50W MR16 halogens, expect noticeably less light; for accent and display lighting on a 35W lamp footprint it matches.
2) Will 3000K match the warm white MR16 lamps already in my other fixtures?
This lamp is fixed at 3000K warm white with a CRI of 80, and there is no color-select switch on it. It matches other 3000K lamps, but sitting next to 2700K halogen it will read slightly cooler, and next to 4000K it will read clearly warmer. For a uniform run of heads, relamp the whole group.
3) Is this MR16 dimmable, and will it work on my existing low-voltage dimmer?
The S11396 is a dimmable lamp. Dimming performance on a low-voltage system depends on the transformer and dimmer pairing as much as the lamp: magnetic transformers with a compatible LED dimmer are generally the safer combination, and a 4.5W lamp draws well under the minimum load many older dimmers require, so several lamps on the circuit helps. Electrical draw is 0.375A at 60Hz.
4) Can I use this MR16 LED in a bathroom or covered outdoor soffit?
Damp location rated, so enclosed bath ceilings, covered porches, and soffits are within its rating. Wet locations, where the lamp would see direct rain or spray, are not.
5) Is a 40 degree beam the right spread for retail display or general accent lighting?
The 40 degree beam is a flood spread, good for washing artwork, shelving, and general accent coverage where you want an even pool rather than a tight highlight. For a punchy spotlight on a single object, a narrower 15 to 25 degree MR16 does that job better.
6) How long does the Satco S11396 last compared to the halogen MR16 it replaces?
Rated life is 25,000 hours. Halogen MR16s in the same sockets typically run 2,000 to 4,000 hours, so relamping intervals stretch considerably, which is the main reason property managers switch out low-voltage halogen track in lobbies and corridors.
7) Can this MR16 be mounted pointing straight up or sideways?
Burning position is universal, so base-up, base-down, and horizontal aiming are all fine. That covers uplight cans, gimbal trim, and track heads aimed at any angle.
8) Does this lamp have a cover over the LEDs, or are the diodes exposed?
It is a lensed lamp with a plastic lens over the array, which softens the individual diodes compared to an open LED face. The housing is black finish, built from metal, plastic, and electronic components.
9) Is this lamp DLC listed for a utility rebate?
No. The S11396 is not DLC approved, so it will not qualify under programs that require a DesignLights Consortium listing. It is FCC compliant.
10) What is the exact part number to order this black 3000K MR16 LED?
Order Satco part number S11396. It is sold in the black finish only, as a 4.5W 12V GU5.3 MR16 at 3000K.
11) Is the Satco S11396 a three-way lamp?
No. It is a single-output 4.5W lamp at 360 lumens, dimmable on a compatible low-voltage dimming system but with no stepped three-way function. MR16 sockets are not three-way sockets to begin with.
How fast can I get the Satco Lighting S11396 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11396 come with a warranty?
Absolutely. The Satco Lighting S11396 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11396?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11396 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.