You may also like
SATCO Lighting S11394 4.5W MR16 LED, Silver Finish, 4000K, GU5.3 Base, 360 Lumens, 12V
4.5 Watt MR16 LED - Silver Finish - 4000K - GU5.3 Base - 360 Lumens - 12 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.375A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Housing Color:
- Gray
- Lamp Base:
- Bi Pin GU5.3
- Lamp Filament:
- LED
- Lamp Shape:
- MR16
- Lens Finish:
- Array
- Lens Material:
- Plastic
- Lensed:
- Yes
- Lumens:
- 360L
- Operating Frequency:
- 60Hz
- Product Type:
- MR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 35W
- Location Rating:
- Damp
- Base Material:
- Metal / Plastic / Electronic Components
- Product Voltage:
- 12V
- Beam Spread Angle:
- 40
- Light Temperature:
- 4000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4.5W
- Product Material:
- Metal / Plastic / Electronic Components
- Product Weight:
- 0.08 lb
Satco Lighting S11394 – Frequently Asked Questions
1) Will the Satco S11394 MR16 LED work in my existing 12V track or landscape fixture, or do I need line voltage?
The S11394 is a 12 volt lamp, so it needs a fixture running off a transformer, low voltage track, or a landscape system. Drop it into a 120V line voltage socket and it won't run. It draws 0.375A at 4.5 watts on 60Hz, which is what you use to check the load on the transformer feeding the run.
2) What incandescent MR16 does the 4.5W Satco S11394 LED replace?
It replaces a 35W halogen MR16 at 360 lumens, so you get comparable output for about an eighth of the draw. On a multi-lamp low voltage run that also frees up transformer capacity, which is why property managers relamping a lobby or a landscape circuit usually find they are well under load after the swap.
3) Can I use the Satco S11394 MR16 LED outdoors or in a bathroom?
Damp location rated, which covers a covered exterior soffit, a bathroom, or a canopy where the lamp sees moisture in the air but no direct water. It is not wet rated, so an open landscape fixture or anywhere it takes direct rain or spray needs a wet rated lamp instead. Burning position is universal, so you can aim it up, down, or horizontal.
4) Will 4000K match the bulbs already in the rest of my building?
4000K is neutral or cool white, the commercial standard for offices, corridors, and retail. It will read noticeably cooler and less yellow than 2700K or 3000K halogen, so if you are relamping only part of a run alongside existing halogen MR16s the difference will show. Standardize the whole circuit or the whole room. CRI is 80.
5) Is the Satco S11394 MR16 LED dimmable on my existing low voltage dimmer?
The lamp is dimmable. On a 12V system the dimming behavior depends on the transformer it is paired with as much as the lamp, so magnetic and electronic transformers will not perform the same. The lamp itself is not three-way and the color temperature is fixed at 4000K, not selectable.
6) What does a 40 degree beam on the S11394 MR16 actually cover?
40 degrees is a flood pattern, wide enough for general downlighting and washing a retail display or a corridor ceiling rather than putting a tight pool on a single object. If you are accent lighting artwork or a merchandise pedestal and want a defined spot, you want a narrower beam MR16.
7) How long does the Satco S11394 MR16 LED last before it needs relamping?
Rated 25,000 hours average. For an MRO or facilities buyer that is roughly ten years at eight hours a day, which is the real argument for swapping recessed low voltage cans that need a lift to reach.
8) Is the S11394 MR16 DLC listed for a utility rebate?
Not DLC approved, so it will not qualify on a program that requires a DLC listed product. It is FCC compliant.
9) Does the Satco S11394 have a covered lens or exposed LEDs?
Lensed, with a plastic lens over an LED array rather than bare diodes. The housing is gray, described as a silver finish, and the base assembly is metal, plastic, and electronic components. In an open aperture fixture where the lamp face is visible, that lens is what keeps you from looking straight into the individual emitters.
10) Can I sell or install the Satco S11394 in California?
Lawful for sale in California per Satco's own designation on the S11394, which matters for distributors shipping into the state and for contractors specifying on California jobs where lamp regulations knock out some legacy MR16 product.
11) Does the Satco S11394 MR16 come in other finishes or color temperatures?
One configuration only, MPN S11394, gray silver finish at 4000K. There is no warm white or CCT selectable version under this part number, so if the job calls for 3000K you need a different Satco MR16 part.
How fast can I get the Satco Lighting S11394 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11394 come with a warranty?
Absolutely. The Satco Lighting S11394 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11394?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11394 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.