SATCO Lighting S11465 30W, LED...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$15.93
Satco Lighting SAT-S11465 30 Watt - LED - A25 - 3000K - Medium Base - Non Dimmable - 120 Volt

SATCO Lighting S11465 30W, LED, A25, 3000K, Medium Base, Non Dimmable, 120V

(No reviews yet) Write a Review

Model: S11465
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$15.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11465 30W, LED, A25, 3000K, Medium Base, Non Dimmable, 120V

30 Watt - LED - A25 - 3000K - Medium Base - Non Dimmable - 120 Volt

Manufacturer Resources

Product Specs

Amps:
0.250A
Avg Rated Hours:
15000
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
No
FCC Compliant:
Yes
Lamp Filament:
LED
Lamp Shape:
A25
Lens Material:
Plastic (PS)
Lumens:
3750L
Operating Frequency:
60Hz
Product Type:
LED
Three-Way:
No
Warranty:
3 Year Limited
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Medium
Base Material:
Plastic (PS)
Incandescent Equivalent:
300W
Location Rating:
Damp
CRI:
80
Subcategory:
LED
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V
Beam Spread Angle:
200
Light Temperature:
3000K
Product Category:
Light Bulbs
Product Wattage:
30W

Satco Lighting S11465 – Frequently Asked Questions

1) Can I put the Satco S11465 A25 LED bulb on a dimmer?
No. The S11465 is a non-dimmable lamp. Wired to a dimmer it will flicker, buzz, or fail early, so it belongs on a straight on/off switch or a contactor. It also isn't a three-way bulb, so keep it out of 3-way sockets that expect two filament levels.
2) Will a 30W LED A25 bulb really replace a 300 watt incandescent?
That's the rated swap. The S11465 draws 30 watts and is rated as a 300W incandescent equivalent, putting out 3,750 lumens. On a 120V circuit it pulls 0.250A versus roughly 2.5A for the incandescent, so a fixture or circuit that was loaded with several 300W lamps drops dramatically in draw.
3) Can I use this bulb outdoors under a covered porch or in a parking garage?
Damp location rated, so covered exterior areas, porches, garages, and stairwells are fine as long as the lamp isn't exposed to direct rain or spray. For open weather exposure you need a wet-location rated lamp or a gasketed wet-rated fixture.
4) Can this LED bulb be mounted base up or sideways?
Burning position is universal, so the S11465 can run base up, base down, or horizontal without affecting rated life. That matters for wall sconces, jelly jars, and high-bay style porcelain sockets where the lamp isn't hanging straight down.
5) What kind of light does the 3000K version put out, and will it match my other bulbs?
3000K is warm white, a little crisper than the 2700K soft white most incandescent replacements use and noticeably warmer than 4000K neutral. CRI is 80, typical for general-purpose commercial lamps. The color temperature is fixed, not field selectable, so if you're standardizing a building keep all sockets on 3000K or the mismatch will show.
6) Does this bulb throw light in all directions or just downward?
The beam spread is 200 degrees, so it's an omnidirectional-style A-lamp that lights sideways and down, not a narrow flood. Good for open fixtures, table and floor lamps, and jelly jars where light needs to escape past the base. If you need a tight downward beam in a recessed can, a reflector lamp is the better choice.
7) Does this Satco LED meet California Title 24?
Yes, the S11465 is listed as Title 24 compliant, which matters on California residential and multi-family work where lighting has to meet the energy code. It is also FCC compliant for electromagnetic interference. It is not DLC listed, so it won't qualify for utility rebate programs that require DesignLights Consortium listing.
8) How long does the Satco S11465 last before relamping?
Rated 15,000 average hours. For a property manager running lobby or corridor lights 12 hours a day, that's roughly three and a half years between relamps, against the few thousand hours a 300W incandescent would give at the same duty.
9) What is the Satco A25 LED bulb made of, and is the glass breakable?
Both the base and the lens are polystyrene plastic rather than glass, so the lamp holds up better to handling and shipping in a maintenance cart than a glass envelope would. Finish is white.
How fast can I get the Satco Lighting S11465 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11465 come with a warranty?
Absolutely. The Satco Lighting S11465 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11465?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11465 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!