SATCO Lighting S11467 30W, LED, A25, 5000K, Medium Base, Non Dimmable, 120V
30 Watt - LED - A25 - 5000K - Medium Base - Non Dimmable - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.250A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- No
- FCC Compliant:
- Yes
- Lamp Filament:
- LED
- Lamp Shape:
- A25
- Lens Material:
- Plastic (PS)
- Lumens:
- 3750L
- Operating Frequency:
- 60Hz
- Product Type:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Medium
- Base Material:
- Plastic (PS)
- Incandescent Equivalent:
- 300W
- Location Rating:
- Damp
- CRI:
- 80
- Subcategory:
- LED
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 200
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 30W
Satco Lighting S11467 – Frequently Asked Questions
1) Can I put the Satco S11467 A25 LED on a dimmer?
No. The S11467 is a non-dimmable lamp, and a three-way socket is out too. Put it on a dimmer or a 3-way fixture and you risk flicker, buzz, or early failure. For dimmed areas, pick a lamp specifically listed as dimmable.
2) Can this LED bulb be used in an outdoor or garage fixture?
The S11467 carries a damp location rating, so a covered porch, carport, garage, stairwell, or bathroom is fine. It is not wet rated, so keep it out of anywhere exposed to direct rain or spray. It can also be mounted base-up, base-down, or horizontal since the burning position is universal.
3) How many of these can I run on a 15 amp circuit?
Each S11467 draws 0.250 amps at 120 volts. That is the figure to use when loading a lighting circuit or sizing a contactor for a bank of fixtures, alongside the 30 watt input.
4) Does the Satco S11467 qualify for a DLC utility rebate?
No. This lamp is not DLC approved, so it will not qualify under programs that require a DLC listing. It is Title 24 compliant and FCC compliant, which covers California residential lighting requirements and RF emissions.
5) How much light spread do I get from one of these in an open ceiling fixture?
The beam spread is 200 degrees, so light throws out well past straight down and wraps back up toward the ceiling. That suits open globes, wall packs with a diffuser, and bare lampholders where you want general area light rather than a directional beam.
6) How long does this Satco LED last compared to the incandescent it replaces?
Average rated life is 15,000 hours. Run roughly 12 hours a day in a common area, that is about three and a half years between relamps, which is the argument for swapping out 300W incandescents in hard-to-reach fixtures.
7) Is the S11467 glass or plastic, and is it colour selectable?
Both the lens and the base are polystyrene plastic, in a white finish, so there is no glass to shatter in a shop or garage setting. Colour temperature is fixed at 5000K, not field selectable, so every lamp out of the case matches.
How fast can I get the Satco Lighting S11467 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11467 come with a warranty?
Absolutely. The Satco Lighting S11467 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11467?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11467 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.