SATCO Lighting S13152 100W, LED HID Replacement, 4K, EX39, Type B Ballast Bypass, 120-277V, Dimmable

Yes. The S13152 is a Type B ballast bypass lamp, which means the existing HID ballast must be removed or bypassed and line voltage wired directly to the socket. It runs on 120-277 volts, so it works on either a 120V or a 277V circuit once the fixture is rewired. Leaving the old magnetic or electronic HID ballast in the circuit is not an option with a Type B lamp.

It is a 100 watt LED sold as an HID replacement lamp on an EX39 mogul extended base, so the target is existing mogul base metal halide or high pressure sodium high bay and area fixtures. Confirm the socket is EX39 and that the fixture can be rewired for direct line voltage before ordering.

The lamp is 4000K (listed as 4K), a neutral white. It will match other 4000K lamps in a warehouse, parking garage, or shop. If the rest of your building is on 5000K daylight lamps, expect a visible warmer difference between fixtures.

Yes, it is a dimmable lamp. Because it is Type B, the dimming happens on the line voltage side after the ballast is bypassed, so the fixture has to be fed from a compatible line voltage dimming circuit.

It is offered as one configuration, manufacturer part number S13152 in white: 100W, 4000K, EX39 base, Type B ballast bypass, 120-277V, dimmable. There are no alternate wattages or color temperatures under this part number, so a facility standardizing on it orders the same SKU for every fixture.