SATCO Lighting S16441 42W T8 L...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$62.79
Satco Lighting SAT-S16441 42 Watt T8 LED - CCT Selectable - 120-277 Volt - Single or Double Ended - Type B Ballast Bypass

SATCO Lighting S16441 42W T8 LED, CCT Selectable, 120-277V, Single or Double Ended, Type B Ballast Bypass

(No reviews yet) Write a Review

Model: S16441
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$62.79
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S16441 42W T8 LED, CCT Selectable, 120-277V, Single or Double Ended, Type B Ballast Bypass

42 Watt T8 LED - CCT Selectable - 120-277 Volt - Single or Double Ended - Type B Ballast Bypass

Manufacturer Resources

Product Specs

Amps:
0.350-0.152A
Avg Rated Hours:
50000
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CCT Selectable:
Yes
DLC Approved:
No
Dimmable:
No
FCC Compliant:
Yes
Lamp Filament:
LED
Lamp Shape:
T8
Lens Finish:
Frost
Lens Material:
Plastic
Lumens:
5800L/6000L/5700L
Operating Frequency:
50/60Hz
Product Type:
Linear
Three-Way:
No
Warranty:
5 Year Limited - T8 LED Bulbs
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Recessed Double Contact HO/VHO
Base Material:
Polycarbonate (PC)
Incandescent Equivalent:
125W
Location Rating:
Damp
CRI:
83
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V-277V
Beam Spread Angle:
360
Light Temperature:
4000K/5000K/6500K
Product Category:
Light Bulbs
Product Wattage:
42W
Department:
Electrical

Satco Lighting S16441 – Frequently Asked Questions

1) Does the Satco S16441 T8 LED tube need the existing fluorescent ballast, or does it have to be removed?
The S16441 is a Type B ballast bypass lamp, so the existing fluorescent ballast must be removed and line voltage wired directly to the sockets. It runs on 120V to 277V at 50/60Hz, which covers both residential and commercial panels. If you want a lamp that drops into an existing ballast with no rewiring, this is the wrong type of tube.
2) How do I set the color temperature on the Satco S16441, and what are the choices?
It is a CCT selectable lamp with three settings: 4000K, 5000K and 6500K. Output shifts slightly with the setting, 5800 lumens at 4000K, 6000 at 5000K and 5700 at 6500K. For a fleet of fixtures across a building, pick one setting and stick to it so the openings match; CRI is 83 at any setting.
3) Can the Satco S16441 42W T8 LED be put on a dimmer?
No. The 42W CCT selectable T8 is non-dimming, and it is not a three-way lamp either. On a dimmer circuit expect flicker or no start. Leave it on a straight switched or occupancy-sensor circuit.
4) Does the Satco S16441 qualify for a DLC utility rebate?
No. The 42W T8 LED is not DLC approved, so it will not qualify under rebate programs that require a DLC listing. It is Title 24 compliant and FCC compliant, which matters for California work and for keeping RF interference out of nearby electronics.
5) Can I wire the Satco S16441 single ended or does power have to go to both ends?
Either. The 42W T8 LED is single or double ended, so you can bring line and neutral to one end or split them across both ends depending on how the fixture is laid out. That flexibility is useful when you are retrofitting a strip fixture whose existing wiring only reaches one tombstone.
6) Is this T8 LED tube rated for a parking garage, cooler, or other damp area?
The S16441 carries a Damp location rating and is classified for indoor use, so it works in damp indoor spots like covered walkways or garages inside an enclosed fixture. It is not a wet location lamp, so do not use it where it will see direct water or weather.
7) What current draw should I figure for the Satco S16441 when sizing a circuit?
Draw runs 0.350A at the low end of the voltage range down to 0.152A at the high end, at 42 watts per lamp. Use the 120V figure of 0.350A when you are totalling lamps on a 120V branch circuit for a retrofit.
8) Can this LED tube be mounted vertically or in a sign fixture?
Burning position is universal, so the lamp can run horizontal, vertical, or at any angle without derating. Light spreads a full 360 degrees around the tube, so it fills a wraparound or open strip fixture rather than throwing in one direction only.
9) Is the Satco S16441 glass or plastic?
Plastic. The lens is frosted plastic and the base is polycarbonate, so there is no glass to shatter in a shop, garage, or food-adjacent area. The frost diffuses the LED array instead of showing individual diodes.
How fast can I get the Satco Lighting S16441 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S16441 come with a warranty?
Absolutely. The Satco Lighting S16441 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S16441?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S16441 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!