SATCO Lighting S16434 15W T8 LED, CCT Selectable, 120-277V, Single or Double Ended, Type B Ballast Bypass
15 Watt T8 LED - CCT Selectable - 120-277 Volt - Single or Double Ended - Type B Ballast Bypass
Manufacturer Resources
Product Specs
- Amps:
- 0.125-0.542A
- Avg Rated Hours:
- 50000
- Ballasting Requirements:
- Ballast Bypass
- Burning Position:
- Universal
- CCT Selectable:
- Yes
- DLC Approved:
- No
- Dimmable:
- No
- FCC Compliant:
- Yes
- Lamp Filament:
- LED
- Lamp Shape:
- T8
- Lens Finish:
- Frost
- Lens Material:
- Plastic
- Lumens:
- 2100L/2200L/2050L
- Operating Frequency:
- 50/60Hz
- Product Type:
- Linear
- Three-Way:
- No
- Warranty:
- 5 Year Limited - T8 LED Bulbs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Recessed Double Contact HO/VHO
- Base Material:
- Polycarbonate (PC)
- Incandescent Equivalent:
- 75W
- Location Rating:
- Damp
- CRI:
- 83
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V-277V
- Beam Spread Angle:
- 360
- Light Temperature:
- 4000K/5000K/6500K
- Product Category:
- Light Bulbs
- Product Wattage:
- 15W
- Department:
- Electrical
Satco Lighting S16434 – Frequently Asked Questions
1) Can I use one lamp across 120V and 277V circuits in different buildings?
Yes. The S16434 runs on 120V through 277V at 50/60Hz, drawing 0.125 to 0.542A depending on supply voltage. That lets a property manager or MRO buyer stock a single lamp for both residential-style 120V panels and 277V commercial lighting circuits.
2) How do I set the color temperature on the Satco S16434 CCT selectable T8?
The lamp is field selectable between 4000K, 5000K and 6500K, so you pick the color at install rather than ordering a separate lamp per temperature. Output shifts slightly with the setting: 2100 lumens at one setting, 2200 at another, 2050 at the third. Practically, you can standardize one part number across a warehouse, shop or garage and still match the existing look of each area.
3) What is the difference between single ended and double ended wiring on this Satco ballast bypass tube?
The S16434 supports both. Single ended means line and neutral both land on the sockets at one end of the fixture, with the other end non-electrified; double ended puts line on one end and neutral on the other, which is the layout most existing fluorescent strip fixtures already have after the ballast is removed. Because this lamp takes either, an electrician can bypass the ballast whichever way the fixture wiring makes easier.
4) Is this 15W T8 LED dimmable?
No. The S16434 is non-dimmable and it is not three-way. If it is wired to a dimmer or an occupancy sensor with dimming output, you will get flicker or premature failure. Use it on straight switched circuits only.
5) Can this T8 LED tube go in a parking garage, cooler or covered exterior walkway?
It is rated for indoor use and for damp locations, so a covered walkway, a cooler or a garage bay that stays dry of direct water is within rating. It is not wet location rated, so skip open exterior sites with direct rain or washdown areas sprayed with a hose.
6) Does the Satco S16434 qualify for utility rebates?
It is not DLC listed, so it will not qualify for the utility and efficiency programs that require DLC Qualified Products List membership. It is Title 24 compliant and FCC compliant. If a rebate application is driving the purchase, you need a DLC listed tube instead.
7) How much light does a 15W LED T8 give compared to what I'm replacing?
Output runs 2050 to 2200 lumens depending on which color setting you choose, which Satco puts at a 75W incandescent equivalent. Light is thrown a full 360 degrees through a frosted plastic lens, so it fills an open strip fixture rather than throwing in one direction. CRI is 83.
8) Can this tube be mounted vertically or in a sign can lying flat?
Burning position is universal, so the lamp can run horizontal, vertical or at any angle with no derating. Rated life is 50,000 hours. Base is polycarbonate and the lens is plastic rather than glass, which is why these are often chosen for shops and corridors where a glass tube is a breakage risk.
How fast can I get the Satco Lighting S16434 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S16434 come with a warranty?
Absolutely. The Satco Lighting S16434 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S16434?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S16434 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.