SATCO Lighting S21324 11.5W, A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$6.21
Satco Lighting SAT-S21324 11.5 Watt - A19 LED - 90CRI - 2700K - GU24 base - 220 deg. Beam Angle - 120 Volt - 1100 Lumens - CEC

SATCO Lighting S21324 11.5W, A19 LED, 90CRI, 2700K, GU24 Base, 220 degree Beam Angle, 120V, 1100 Lumens, CEC

(No reviews yet) Write a Review

Model: S21324
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$6.21
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S21324 11.5W, A19 LED, 90CRI, 2700K, GU24 Base, 220 degree Beam Angle, 120V, 1100 Lumens, CEC

11.5 Watt - A19 LED - 90CRI - 2700K - GU24 base - 220 deg. Beam Angle - 120 Volt - 1100 Lumens - CEC

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.096A
Avg Rated Hours:
25000
Burning Position:
Universal
CA Web Text:
California T24 Listed
CCT Selectable:
No
CRI:
90+
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Bi Pin GU24
Lamp Filament:
LED
Lamp Shape:
A19
Lens Finish:
White
Lens Material:
Plastic (PS)
Lumens:
1100L
Operating Frequency:
60Hz
Product Type:
Type A
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
75W
Location Rating:
Damp
Base Material:
Metal / Plastic / Electronic Components
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
220
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
11.5W
Product Weight:
0.12 lb
Product Material:
Metal / Plastic / Electronic Components

Satco Lighting S21324 – Frequently Asked Questions

1) Can this GU24 LED bulb go in an enclosed or fully sealed fixture?
Yes, it is an enclosed rated lamp, so closed glass ceiling fixtures and sealed globes are fine. It is also damp location rated, which covers bathrooms and covered porches, but it is an indoor lamp and should not be used in wet, directly exposed locations.
2) Does this A19 LED meet California Title 24 / CEC requirements?
It is California T24 Listed, which is what the GU24 base plus the 90+ CRI and 2700K output are there to satisfy for residential installs in California. It is not DLC listed, so it will not qualify for utility programs that require DLC.
3) What incandescent wattage does the 11.5W GU24 A19 LED replace?
It replaces a 75W incandescent, drawing 11.5 watts and putting out 1100 lumens at 120 volts. Current draw is 0.096A, so you can load a lot of them on one circuit compared with the lamps you are pulling out.
4) Is the Satco S21324 dimmable, and does it work as a 3-way bulb?
Dimmable, yes. Three-way, no, and it is not color selectable either, so it runs at a fixed 2700K. If you are replacing a 3-way lamp in a turn-knob socket, this one will give you a single light level only.
5) Will this bulb match the warm color of the incandescent lamps already in my building?
2700K is the warm white that reads closest to incandescent, and with a 90+ CRI the color rendering is high enough that paint, wood tone and skin tone look right. Useful for hospitality and multi-family common areas where mismatched color temperature across a corridor gets noticed.
6) Can this bulb be installed base-up in a recessed can or sideways in a sconce?
Burning position is universal, so base-up in a recessed can, base-down in a pendant, or horizontal in a wall sconce all work. With a 220 degree beam spread it throws light nearly all the way around the lamp rather than acting as a directional flood.
7) How long does the Satco S21324 last before relamping?
Rated at 25,000 average hours. For an MRO or property maintenance schedule, that is the figure to plan relamp cycles against, and it is the main reason to swap pin-base CFLs out for this lamp rather than replacing them in kind.
8) What does the bulb look like once it is in an open fixture?
White lens and white housing in a standard A19 shape, with a plastic (PS) lens over metal, plastic and electronic internals. Each lamp weighs 0.12 lb, so it adds essentially nothing to a light fixture or shade.
How fast can I get the Satco Lighting S21324 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21324 come with a warranty?
Absolutely. The Satco Lighting S21324 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21324?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21324 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!