SATCO Lighting S28485 11.5W, A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$6.21
Satco Lighting SAT-S28485 11.5 Watt - A19 LED - 90CRI - 4000K - GU24 base - 220 deg. Beam Angle - 120 Volt - 1100 Lumens - CEC

SATCO Lighting S28485 11.5W, A19 LED, 90CRI, 4000K, GU24 Base, 220 degree Beam Angle, 120V, 1100 Lumens, CEC

(No reviews yet) Write a Review

Model: S28485
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$6.21
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S28485 11.5W, A19 LED, 90CRI, 4000K, GU24 Base, 220 degree Beam Angle, 120V, 1100 Lumens, CEC

11.5 Watt - A19 LED - 90CRI - 4000K - GU24 base - 220 deg. Beam Angle - 120 Volt - 1100 Lumens - CEC

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.096A
Avg Rated Hours:
25000
Burning Position:
Universal
CA Web Text:
California T24 Listed
CCT Selectable:
No
CRI:
90+
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Bi Pin GU24
Lamp Filament:
LED
Lamp Shape:
A19
Lens Finish:
White
Lens Material:
Plastic (PS)
Lumens:
1100L
Operating Frequency:
60Hz
Product Type:
Type A
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
75W
Location Rating:
Damp
Base Material:
Metal / Plastic / Electronic Components
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
220
Light Temperature:
4000K
Product Category:
Light Bulbs
Product Wattage:
11.5W
Product Material:
Metal / Plastic / Electronic Components
Product Weight:
0.09 lb

Satco Lighting S28485 – Frequently Asked Questions

1) Can I use this GU24 LED bulb in an enclosed ceiling fixture?
Yes, it is an enclosed rated lamp, so a closed glass dome or drum fixture won't trap enough heat to void its use. Burning position is universal, so base-up, base-down, or horizontal all work.
2) Is this Satco A19 LED OK in a bathroom or covered exterior porch?
It carries a damp location rating and is listed for indoor use, so a bathroom, laundry, or a covered soffit where it won't take direct water is fine. For an exposed outdoor fixture that sees rain or sprinkler spray, you need a wet-location rated lamp instead.
3) Does this Satco GU24 lamp meet California Title 24 for a rental rehab?
It is listed as California T24 compliant, which is why it is built on a GU24 pin base rather than a screw base. It is not DLC approved, so it won't qualify for utility rebate programs that require DLC listing. It is FCC compliant.
4) What incandescent wattage does the 11.5W S28485 replace, and how bright is it?
It replaces a 75W incandescent at 11.5 watts, putting out 1100 lumens. Current draw is 0.096A at 120V, 60Hz, so a 15A lighting circuit carries a large number of them without getting near capacity.
5) Is this bulb dimmable, and can I use it on a 3-way lamp socket?
Dimmable, yes. Three-way, no. The S28485 is a single-level lamp, so in a 3-way socket it will only light at one output. For dimming, pair it with a dimmer rated for LED loads.
6) Will 4000K match the bulbs already in my building, and is the color fixed?
The S28485 is fixed at 4000K cool white, with no CCT selector switch, so every unit lights the same neutral white. If your other units are running 2700K or 3000K warm white, this will read visibly cooler beside them. For color-critical spaces the 90+ CRI rendering is a step above typical 80 CRI lamps.
7) How wide does this A19 LED throw light, and how long before maintenance has to relamp it?
Beam spread is 220 degrees, so it distributes light nearly all the way around the lamp rather than throwing a directional cone, which suits table lamps, ceiling fixtures, and open shades. Average rated life is 25,000 hours.
8) What is the lens made of on the Satco S28485, and is the diffuser clear or frosted?
The lens is white polystyrene plastic with a white finish, so it diffuses rather than showing the LED emitters. The housing is white as well, and base construction is metal with plastic and electronic components. Shape is a standard A19.
How fast can I get the Satco Lighting S28485 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S28485 come with a warranty?
Absolutely. The Satco Lighting S28485 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S28485?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S28485 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!