SATCO Lighting S21325 11.5W, A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$6.21
Satco Lighting SAT-S21325 11.5 Watt - A19 LED - 90CRI - 3000K - GU24 base - 220 deg. Beam Angle - 120 Volt - 1100 Lumens - CEC

SATCO Lighting S21325 11.5W, A19 LED, 90CRI, 3000K, GU24 Base, 220 degree Beam Angle, 120V, 1100 Lumens, CEC

(No reviews yet) Write a Review

Model: S21325
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$6.21
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S21325 11.5W, A19 LED, 90CRI, 3000K, GU24 Base, 220 degree Beam Angle, 120V, 1100 Lumens, CEC

11.5 Watt - A19 LED - 90CRI - 3000K - GU24 base - 220 deg. Beam Angle - 120 Volt - 1100 Lumens - CEC

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.096A
Avg Rated Hours:
25000
Burning Position:
Universal
CA Web Text:
California T24 Listed
CCT Selectable:
No
CRI:
90+
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Bi Pin GU24
Lamp Filament:
LED
Lamp Shape:
A19
Lens Finish:
White
Lens Material:
Plastic (PS)
Lumens:
1100L
Operating Frequency:
60Hz
Product Type:
Type A
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
75W
Location Rating:
Damp
Base Material:
Metal / Plastic / Electronic Components
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
220
Light Temperature:
3000K
Product Category:
Light Bulbs
Product Wattage:
11.5W
Product Weight:
0.12 lb
Product Material:
Metal / Plastic / Electronic Components

Satco Lighting S21325 – Frequently Asked Questions

1) Can I put this A19 LED in a fully enclosed fixture?
Yes, it is an enclosed rated lamp, so a sealed ceiling dome, jelly jar, or closed globe fixture is fine. It also burns in any position, base up, base down, or horizontal, so you are not limited by how the fixture is mounted.
2) Does this bulb meet California Title 24 for a kitchen or bath remodel?
The S21325 is California T24 listed, which is why it is built on a GU24 base with 90+ CRI and a 3000K color temperature. That combination is what California high-efficacy lighting requirements are after in residential kitchens and baths.
3) Will this match the 3000K bulbs already in my other units?
It is a fixed 3000K warm white, not color selectable, so every lamp out of the box is the same warm white. For a property manager standardizing across units, that consistency is the point: no switch to set wrong, and 90+ CRI so skin tones and finishes read the same from room to room.
4) Is this Satco GU24 A19 lamp dimmable?
Yes, it dims. It runs on 120V at 60Hz and draws well under a tenth of an amp, so check that your dimmer has a low enough minimum load for the number of lamps on the circuit. LED-rated dimmers are the safe pairing.
5) Can I use this LED bulb in a covered porch or bathroom with a shower?
It carries a damp location rating and is listed for indoor use, so a bathroom, a laundry, or a covered soffit fixture is within spec. Do not use it anywhere it can take direct rain or spray, that calls for a wet location lamp.
6) Will this work in a three-way lamp socket?
Not as a three-way. The S21325 is a single-output lamp, so in a three-way circuit it will only light at one level rather than stepping through low, medium, and high. It does dim on a dimmer, which is the better route if you want level control.
7) Is this bulb DLC listed for a commercial rebate?
No, the S21325 is not DLC approved, so it will not qualify under utility programs that require DLC listing. It is FCC compliant and California T24 listed, which covers code compliance on residential and light commercial work in California.
8) How long will these last before maintenance has to swap them?
Rated for 25,000 average hours. In a common area burning roughly 12 hours a day that is about 5.7 years before a scheduled relamp, which is what makes GU24 LEDs worth the changeover in multi-family and hospitality.
9) Is a 220 degree beam angle wide enough for a general room fixture?
Yes. At 220 degrees the light wraps well past the sides of the lamp, so it fills a shade, a dome, or a globe instead of throwing a spot. The white plastic lens diffuses it further. For directional accent or task light you want a reflector lamp, not an A19.
How fast can I get the Satco Lighting S21325 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21325 come with a warranty?
Absolutely. The Satco Lighting S21325 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21325?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21325 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!