SATCO Lighting S23143 80/63/54 Wattage Selectable, LED HID Replacement, CCT Selectable, Type B, Ballast Bypass, Extended Mogul Base, 100-277V

Yes. The S23143 is a Type B ballast bypass lamp, which means it runs on line voltage directly and the existing HID ballast has to be removed or bypassed before the lamp goes in. Wiring it into a live ballast circuit is not how this lamp is designed to operate. Plan for an electrician on the retrofit if your fixtures still have the ballast and capacitor in the housing.

It uses an extended mogul base, which is a mogul screw base on a lengthened neck. It threads into a mogul socket, but the extra length changes how deep the lamp sits in the fixture, so check the enclosure depth and any reflector or refractor clearance in your HID fixture before committing to a quantity.

The S23143 accepts 100 to 277 volts, so the same lamp works on 120V, 208V, 240V and 277V circuits. For a facility with mixed voltages across buildings, that means one part number covers the whole fleet instead of stocking separate lamps per circuit.

Wattage is selectable on the lamp itself at 80, 63 or 54 watts using Satco's PowerQuick switch. You pick the output at install rather than ordering a different SKU, so one lamp can cover a high bay that needs the full 80W and a lower-mounted fixture where 54W is enough.

The S23143 is CCT selectable using ColorQuick, so the color temperature is set on the lamp at install instead of being fixed by the part number. That is what makes it workable for a property manager phasing a retrofit across a site, since you can dial each new lamp to match whatever the existing lamps are throwing.

Type B, which is what this Satco lamp is, removes the ballast from the circuit entirely. That gets rid of the ballast as a future failure point and the losses that go with it, but it requires rewiring the fixture to line voltage at install. A Type A plug-and-play lamp goes straight into the existing socket with the ballast left in place, which is faster but leaves you depending on an aging HID ballast. If your labor budget allows one visit per fixture and you want the ballast gone, Type B is the choice.

Order Satco Lighting S23143. It comes in a white finish and that single configuration covers all three wattages and the selectable color temperatures, since both are set on the lamp rather than by SKU.