SATCO Lighting S23145 120/100/80 Wattage Selectable, LED HID Replacement, CCT Selectable, Type B, Ballast Bypass, Extended Mogul Base, 100-277V

Yes. The S23145 is a Type B ballast bypass lamp, so the existing HID ballast has to be removed or bypassed and line voltage wired directly to the socket. It runs on 100-277V, which covers both 120V and 277V commercial circuits. If you want a lamp that runs on the existing ballast without rewiring, this is not the one; a Type A plug-and-play lamp is what you need instead.

Both are selected on the lamp itself, so you order one part number and set it at install. Wattage is field selectable at 120, 100, or 80 watts using Satco's PowerQuick switch, and the color temperature is selectable through ColorQuick. That means one SKU can cover several fixture types in a facility instead of stocking multiple lamps.

Yes. The lamp accepts 100-277V input, so the same part works on 120V single phase lighting circuits and on 277V distribution common in commercial and industrial buildings. That is useful for MRO stocking when a site has mixed voltages across parking lot, warehouse, and interior fixtures.

It is an LED HID replacement lamp, built to take the place of an HID lamp in an existing mogul base fixture. Because it is a Type B ballast bypass design, the fixture is rewired to line voltage and the old ballast is taken out of the circuit, so the ballast type of the original HID lamp no longer matters once the conversion is done.

The S23145 comes in a single configuration, a white finish lamp, ordered under manufacturer part number S23145. There is no second finish or base variant to specify.