SATCO Lighting S28765 11.5W, A19 LED, 2700K, Medium Base, 220 degree Beam Angle, 120V

2700K is the warm white point that matches a standard incandescent A-lamp, so the S28765 reads the same soft yellow-white tone tenants are used to in living rooms, bedrooms and corridor sconces. If you want a crisper white for laundry rooms, garages or back-of-house, you want a 4000K or 5000K lamp instead, not this one.

At 11.5 watts, the S28765 sits in the range that stands in for a 75 watt incandescent A19 in general lighting use. The shape and base are identical to the incandescent it replaces, so fixture fit is unchanged; the draw on the circuit drops substantially, which is what matters when you are relamping a whole building on the same branch circuits.

The beam angle is 220 degrees, so light spreads well past the hemisphere and wraps back toward the base. That makes it suitable for open table lamps, shaded fixtures and upside-down ceiling sockets where you need light distributed rather than aimed. For a tight aimed beam over artwork or a countertop, use a PAR or BR reflector lamp instead.

Frost. The S28765 A19 ships with a frosted finish, which diffuses the LED sources so you do not see hot spots through a bare shade or an open globe. If you specifically want visible filament styling behind clear glass, this is not that lamp.

Order Satco S28765. That single part number covers the 11.5W, 2700K, 220 degree beam, 120V frosted A19 with a medium base, so specifying it for every relamp keeps color temperature and output matched from unit to unit. Mixing in another 2700K A19 from a different series is where you start seeing visible color differences between fixtures in the same room.