You may also like
SATCO Lighting S28767 11.5W, A19 LED, 4000K, Medium Base, 220 degree Beam Angle, 120V
11.5 Watt - A19 LED - 4000K - Medium base - 220 deg. Beam Angle -120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.096A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA T20 Alt Sub:
- S8489
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- Frost
- Lens Material:
- Plastic (PS)
- Lensed:
- Yes
- Lumens:
- 1100L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Damp
- Base Material:
- Metal / Plastic
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 4000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 11.5W
- Product Weight:
- 0.08 lb
- Product Material:
- Metal / Plastic
Satco Lighting S28767 – Frequently Asked Questions
1) Can the Satco S28767 A19 LED be used on a dimmer switch?
No. The S28767 is a non-dimmable lamp. Put it on a dimmer and you risk flicker, buzz, or early failure. For dimmable corridors or tenant spaces with wall dimmers already installed, specify a dimmable A19 LED instead and leave this one for switched-only circuits such as closets, stairwells, and utility rooms.
2) Will this 11.5W A19 LED work in a fully enclosed fixture?
Yes, it is an enclosed rated lamp, so it can go in closed globes, jelly jars, and flush drum fixtures where heat builds up. It is rated for indoor use and for damp locations, which covers covered porches and bathrooms, but not wet locations with direct water exposure.
3) Can I ship the Satco S28767 to a job in California?
No. The S28767 is flagged non-compliant for California Title 20. Satco lists S8489 as the Title 20 alternate substitute for that market, so specify that part number on California work and keep the S28767 for projects in other states.
4) Is 4000K the right color temperature if my other bulbs are warm white?
No. At 4000K this lamp reads neutral or cool white, which will not match 2700K or 3000K warm lamps in the same corridor or unit. The color temperature is fixed, not selectable. Use 4000K where you want a clean commercial look (laundry rooms, parking vestibules, back of house) and standardize the whole space on it rather than mixing. CRI is 80.
5) Can I use the Satco S28767 in a 3-way lamp socket?
It is not a three-way lamp. In a 3-way socket it will run at a single output level on whichever contact it picks up, so the low and medium settings on the switch will not work as intended. For table and floor lamps with 3-way sockets, order a three-way LED A19 instead.
6) Can this bulb be installed base-up in a recessed can or sideways in a sconce?
Yes, burning position is universal, so base-up, base-down, or horizontal all work. Combined with the enclosed rating, that covers recessed cans with trims, wall sconces, and ceiling flush mounts.
7) Does this Satco LED qualify for a utility rebate on a commercial retrofit?
It is not DLC approved, so it will not qualify under rebate programs that require a DesignLights Consortium listing. If the rebate paperwork on your project calls for DLC product, you need a different lamp. It is FCC compliant.
8) Will the Satco S28767 run on 277V or on 50Hz power?
No. It is a 120 volt, 60 Hz lamp. Do not put it on a 277V commercial lighting branch circuit or on 50 Hz service. For 277V applications you need a line-voltage rated lamp or a fixture with a 277V driver.
9) Is this bulb glass or plastic, and does that matter for tenant units?
The lens is polystyrene plastic with a frosted finish and the base is metal and plastic. No glass envelope means it will not shatter the way an incandescent does if a tenant drops it, which is a reason it gets specified for multi-family units, dorms, and healthcare corridors. Shipping weight is 0.08 lb per lamp.
How fast can I get the Satco Lighting S28767 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S28767 come with a warranty?
Absolutely. The Satco Lighting S28767 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S28767?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S28767 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.