You may also like
SATCO Lighting S28768 11.5W, A19 LED, 5000K, Medium Base, 220 degree Beam Angle, 120V
11.5 Watt - A19 LED - 5000K - Medium base - 220 deg. Beam Angle -120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.096A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA T20 Alt Sub:
- S8565
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- Frost
- Lensed:
- Yes
- Lumens:
- 1100L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Damp
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 11.5W
Satco Lighting S28768 – Frequently Asked Questions
1) Can the Satco S28768 A19 LED be used on a dimmer switch?
No. The S28768 is a non-dimmable lamp. Put it on a dimmer circuit and you can expect flicker, buzz, or premature failure. If the fixture is on a dimmer, either swap the switch to a standard toggle or spec a dimmable A19 instead.
2) Will this Satco 11.5W A19 LED work in an enclosed ceiling fixture?
Yes. The S28768 is an enclosed rated lamp, so it can go in a closed glass dome, jelly jar, or globe fixture where heat builds up. Burning position is universal, so base up, base down, or horizontal all work. Note the rating is damp location and indoor use, so it is fine for a bathroom or covered breezeway but not for direct wet exposure.
3) Can I sell or install the Satco S28768 in California?
No. This lamp is flagged non-compliant for California, meaning it does not meet the state's Title 20 appliance efficiency requirements. Satco's listed California substitute is the S8565. If the job is in CA, order that instead.
4) Is 5000K too cold for apartment units, or is it better suited to back-of-house?
5000K is daylight white, a crisp blue-white rather than the warm yellow of an incandescent. It reads well in garages, laundry rooms, stairwells, mechanical spaces, storage, and work areas where you want visible detail. For living rooms and bedrooms most property managers stay at 2700K or 3000K. The S28768 is fixed at 5000K, there is no color-selectable switch on it, so if you standardize a building on one bulb, pick the temperature that fits the majority of rooms.
5) Will this LED light a room evenly or does it throw a spot?
It's an omnidirectional-style lamp with a 220 degree beam spread and a frosted lens, so light wraps out and back toward the socket rather than firing in a cone. That makes it a general-purpose bulb for table lamps, ceiling fixtures, and open shades. The frost also softens the LED chips so you don't get hot spots through a clear shade.
6) Will the Satco S28768 work in a 3-way lamp socket?
Not as a 3-way. This bulb is single-level only, so in a 3-way socket it will light at full output on one or more switch positions and stay dark or unchanged on the others. It will not step through low, medium, high. For a 3-way table lamp, order a lamp specifically built for 3-way operation.
7) Is the Satco S28768 DLC listed for a utility rebate?
No, it is not DLC approved, so it will not qualify for rebate programs that require a DesignLights Consortium listing. If the project budget depends on a utility incentive, verify the program's qualified products list before you commit to this lamp.
8) What is the color rendering on this Satco A19 LED, and is it good enough for a retail or office space?
CRI is 80, which is the standard commercial grade for general lighting. Colors read accurately enough for offices, corridors, common areas, and back-of-house. For merchandising where fabric or paint color matters, or for healthcare exam areas, buyers typically step up to a 90+ CRI lamp.
How fast can I get the Satco Lighting S28768 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S28768 come with a warranty?
Absolutely. The Satco Lighting S28768 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S28768?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S28768 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.