SATCO Lighting S28769 11.5W, A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$14.07

SATCO Lighting S28769 11.5W, A19 LED, 2700K, Medium Base, 220 degree Beam Angle, 120V, 4-Pack

(No reviews yet) Write a Review

Model: S28769
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$14.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S28769 11.5W, A19 LED, 2700K, Medium Base, 220 degree Beam Angle, 120V, 4-Pack

11.5 Watt - A19 LED - 2700K - Medium base - 220 deg. Beam Angle -120 Volt - 4-pack

Manufacturer Resources

Product Specs

Amps:
0.096A
Avg Rated Hours:
15000
Burning Position:
Universal
CA T20 Alt Sub:
S8564
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
A19
Lens Finish:
Frost
Lensed:
Yes
Lumens:
1100L
Operating Frequency:
60Hz
Product Type:
Type A
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
3 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
75W
Location Rating:
Damp
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
220
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
11.5W
Product Weight:
0.08 lb

Satco Lighting S28769 – Frequently Asked Questions

1) Can the Satco S28769 A19 LED be used on a dimmer switch?
No. The S28769 is a non-dimmable lamp, so it has to run on a standard on/off switch. Put it on a dimmer and you can expect flicker, buzz, or early failure. If the fixture is on a dimmed circuit, pick a lamp specifically listed as dimmable instead.
2) Can I put this Satco 11.5W A19 LED in an enclosed ceiling fixture or a closed glass globe?
Yes. The S28769 is an enclosed rated lamp, so a closed globe, drum fixture, or jelly jar is fine. It can also be mounted in any orientation, base up or base down, since the burning position is universal.
3) Can this Satco A19 be shipped to or installed in California?
No. The S28769 is flagged non-compliant for California Title 20, so it should not be specified for California jobs. Satco lists S8564 as the Title 20 alternate substitute for that market.
4) Is a 2700K LED going to match the other bulbs already in my building?
At 2700K the S28769 reads as warm white, the same tone as a standard incandescent or soft white lamp, so it blends with existing residential-style fixtures. The color temperature is fixed, not selectable, and the frosted lens diffuses the output across a 220 degree beam spread for general room lighting rather than directional light. CRI is 80.
5) Can this Satco A19 LED go in a bathroom, covered porch, or laundry room?
Damp location rated and listed for indoor use, so a bathroom, covered entry, or laundry area is within its rating. It is not rated for wet locations where it would take direct rain or spray.
6) Will this work in a three-way lamp socket?
Not as a three-way lamp. The S28769 is a single-output bulb with no three-way function, so in a three-way socket it will only light at one level, or may not respond to every switch position. For a three-way table lamp, order a lamp built for that function.
7) How many of these Satco S28769 bulbs can I put on one 15 amp lighting circuit?
Each lamp pulls 0.096 amps at 120 volts, 60 Hz, so current draw is minimal compared with the incandescents it replaces. The practical limit on a branch circuit is usually the fixture count and the driver inrush, not the steady-state load. The lamp is also FCC compliant.
8) How long do these Satco LED A19 bulbs last before relamping?
Rated at 15,000 average hours. For a common-area fixture running about 12 hours a day, that works out to roughly three and a half years between relamps, which is what makes bulk A19 LED swaps worth the labor in multi-family and hospitality properties.
9) Is the Satco S28769 sold individually or as a multi-pack?
It ships as a 4-pack of frosted A19 lamps under the single part number S28769, so one order quantity gets you four bulbs.
10) Is this bulb DLC listed for a utility rebate?
No. The S28769 is not DLC approved, so it will not qualify for rebate programs that require a DesignLights Consortium listing. Residential-style A19 rebates typically run through ENERGY STAR channels rather than DLC anyway.
How fast can I get the Satco Lighting S28769 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S28769 come with a warranty?
Absolutely. The Satco Lighting S28769 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S28769?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S28769 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.