You may also like
SATCO Lighting S29431 12.5W, PAR30LN LED, 3000K, 40 degree Beam Angle, Medium Base, 120V
12.5 Watt - PAR30LN LED - 3000K - 40 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.104A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR30LN
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 1000L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 12.5W
- Product Weight:
- 0.35 lb
- Product Material:
- Plastic
Satco Lighting S29431 – Frequently Asked Questions
1) Will the Satco S29431 PAR30LN work in a fully enclosed recessed can or an enclosed outdoor fixture?
Yes on both counts. The S29431 is an enclosed rated lamp, so it can go in a sealed or gasketed fixture where heat builds up, and it carries a Wet location rating for indoor or outdoor use. That covers enclosed soffit cans, covered porch fixtures and exterior floods.
2) What incandescent PAR30 wattage does this 12.5W Satco LED replace?
It replaces a 75 watt incandescent PAR30, drawing 12.5 watts and putting out 1000 lumens. Current draw is 0.104A at 120V, 60Hz, so a 15A branch circuit carries a lot of these if you are relamping a whole ceiling.
3) Will 3000K match the other bulbs in my building, and how good is the color rendering?
The S29431 is fixed at 3000K warm white, not color selectable, so every lamp out of the box matches the next one. CRI is 90, which is high enough for retail, hospitality and healthcare spaces where skin tones and finishes need to read correctly. If your existing lamps are 2700K they will look noticeably warmer side by side.
4) Is a 40 degree beam the right choice for general room downlighting or should I use a narrower spot?
Forty degrees is a flood spread, which suits general downlighting, wall washing and covering a work surface from a normal ceiling height. If you are accenting artwork, merchandise or a single architectural feature, a narrower spot beam concentrates the same lumens into a tighter pool. At 1000 lumens spread over 40 degrees, expect even coverage rather than a punchy highlight.
5) Does this Satco PAR30LN meet California Title 24 for a residential job?
It is California T24 listed, so it can be used where Title 24 compliant lamping is called for. It is also FCC compliant. It is not DLC listed, which matters if your utility rebate program requires a DLC qualified product.
6) Can I install this lamp base up in a recessed can or pointed sideways in a track head?
Burning position is universal, so base up in a downlight, base down in a pendant or horizontal in a track head are all fine. Rated life is 25,000 hours regardless of orientation.
7) Will this LED work in a 3-way lamp socket?
No. The S29431 is not a three-way lamp. In a 3-way socket it will run at one output level or may not light on all positions. For a 3-way fixture you need a lamp specifically built for three-way operation.
8) What does the Satco S29431 look like installed, and is the lens clear or frosted?
Silver housing with a clear lens, so the optic reads like a traditional PAR flood rather than a diffused milky face. The lens is thermoplastic (PBT) and the base is plastic, not metal, which keeps weight down in track heads.
How fast can I get the Satco Lighting S29431 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29431 come with a warranty?
Absolutely. The Satco Lighting S29431 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29431?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29431 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.