You may also like
SATCO Lighting S29434 12.5W, PAR30LN LED, 5000K, 40 degree Beam Angle, Medium Base, 120V
12.5 Watt - PAR30LN LED - 5000K - 40 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.104A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR30LN
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 1000L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 12.5W
- Product Weight:
- 0.35 lb
- Product Material:
- Plastic
Satco Lighting S29434 – Frequently Asked Questions
1) Will the Satco S29434 PAR30LN LED work in a fully enclosed recessed can or an enclosed outdoor fixture?
Yes on both counts. The S29434 is an enclosed rated lamp, so it can be installed in a sealed or gasketed fixture where heat builds up, and it carries a Wet location rating for indoor or outdoor use. That covers covered exterior soffits, canopies, and enclosed recessed trims.
2) Will 5000K match the bulbs already in my building, and can I order this one in a warmer color?
The S29434 is fixed at 5000K, a cool daylight white, and it is not a CCT selectable lamp, so there is no field switch to change it. If the rest of your fixtures are 2700K or 3000K, this one will read noticeably bluer next to them. For a warm match, order the equivalent PAR30LN in the color temperature you're standardizing on.
3) Is the 40 degree beam on the Satco S29434 a spot or a flood?
40 degrees is a flood beam, wide enough for general downlighting over a retail floor, lobby, or corridor rather than tight accenting on artwork or merchandise. If you need a punch of light on a specific object, you want a narrower beam angle lamp instead.
4) Can the Satco S29434 PAR30LN be dimmed, and does it work on a three-way lamp socket?
It is a dimmable lamp, so it can run on a dimmer circuit, but it is not a three-way lamp. Don't specify it for a three-way socket that steps through low, medium and high, and use an LED-compatible dimmer rather than an old incandescent-rated one left over from the halogen setup.
5) Is 90 CRI good enough for retail display or a healthcare exam area?
The S29434 is a 90 CRI lamp, which is the threshold most retail, gallery, and clinical specs call out for accurate color rendering. Combined with 5000K, it reads as a crisp neutral daylight, which is why this combination shows up in medical, inspection, and merchandise applications.
6) Can this PAR30 LED be mounted base-up in a recessed can or aimed sideways in a track head?
Burning position is universal, so the S29434 can be installed base-up, base-down, or horizontal without affecting its rating. That covers downlight cans, wall wash track heads, and uplights.
7) Is the S29434 DLC listed for a utility rebate?
No. The S29434 is not DLC approved, so it will not qualify under rebate programs that require a DesignLights Consortium listing. If your project is chasing a utility incentive tied to DLC, you need a DLC-qualified lamp instead.
8) How long does the Satco S29434 last before relamping?
Rated average life is 25,000 hours. On a 12-hour-a-day commercial schedule that's roughly 5.7 years of service, which is the number to use when you're building a relamp cycle for a property with a lot of PAR30 cans.
9) What is the Satco PAR30LN LED made of and what does it look like in the trim?
The housing is silver with a plastic base, and the lens is clear thermoplastic (PBT). It is a lensed lamp, so you see a clear face rather than a frosted one, which gives a more defined beam edge within the 40 degree spread.
10) Can I ship the Satco S29434 to a job in California?
Yes, the S29434 is flagged lawful for sale in California. It is also FCC compliant, which matters if you're lamping a space with sensitive electronics or AV equipment where driver noise is a concern.
How fast can I get the Satco Lighting S29434 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29434 come with a warranty?
Absolutely. The Satco Lighting S29434 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29434?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29434 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.