You may also like
SATCO Lighting S29432 12.5W, PAR30LN LED, 3500K, 40 degree Beam Angle, Medium Base, 120V
12.5 Watt - PAR30LN LED - 3500K - 40 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.104A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR30LN
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 1000L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 3500K
- Product Category:
- Light Bulbs
- Product Wattage:
- 12.5W
- Product Weight:
- 0.35 lb
- Product Material:
- Plastic
Satco Lighting S29432 – Frequently Asked Questions
1) Can this Satco PAR30LN LED go in a sealed or fully enclosed fixture?
Yes, it is an enclosed rated lamp, so a gasketed or fully enclosed housing is fine, which is where a lot of LED PARs fail early. It is also wet location rated and listed for both indoor and outdoor use, so covered entries, soffits and exterior cans are within spec.
2) Will 3500K match the bulbs already in my building, and how good is the color rendering?
3500K is a neutral white, between warm 2700K/3000K and cool 4000K. It will not match a 3000K warm-white run, so do not mix them in the same ceiling. Color temperature is fixed, not field selectable. CRI is 90, which is high enough for retail merchandise, healthcare corridors and hospitality where skin tones and finishes need to read accurately.
3) Is the S29432 dimmable, and will it work on my existing dimmer?
The lamp is dimmable on 120V, 60Hz line voltage. It pulls only 0.104 amps, so a group of them on an older magnetic or high-minimum-load incandescent dimmer can sit below the dimmer's minimum load and flicker or drop out. For retrofits, an LED-rated dimmer is the reliable path.
4) Does this bulb meet California Title 24 requirements?
The S29432 is California T24 listed, so it can be used where a Title 24 compliant lamp is called for on a California job. It is not DLC approved, so if your utility rebate program requires a DLC listing, this lamp will not qualify for it.
5) Can I install this lamp base-up in a recessed can or base-down in a track head?
Burning position is universal, so base-up, base-down or horizontal all work. That covers recessed cans, track heads and outdoor floods without derating.
6) Can I use this Satco PAR30LN in a three-way lamp socket?
No. The S29432 is not a three-way lamp, so in a three-way socket it will only operate at one output level rather than stepping. For step switching you need a lamp specifically built as three-way.
7) What is the lens and housing on this PAR30 LED made of, and does the clear lens create glare?
The lens is clear thermoplastic (PBT) over a silver housing with a plastic base. A clear lens gives a defined 40 degree beam with visible source brightness, so in low ceilings or sightline-sensitive spaces you may want a baffled or regressed trim to cut glare.
How fast can I get the Satco Lighting S29432 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29432 come with a warranty?
Absolutely. The Satco Lighting S29432 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29432?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29432 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.