SATCO Lighting S9033 5.5W, A15...
In stock
$4.50
Satco Lighting SAT-S9033 5.5 Watt - A15 LED - Frosted - 5000K - Medium base - 230 deg. Beam Angle - 120 Volt

SATCO Lighting S9033 5.5W, A15 LED, Frosted, 5000K, Medium Base, 230 degree Beam Angle, 120V

(No reviews yet) Write a Review

Model: S9033
Selected Finish is

In stock

$4.50
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9033 5.5W, A15 LED, Frosted, 5000K, Medium Base, 230 degree Beam Angle, 120V

5.5 Watt - A15 LED - Frosted - 5000K - Medium base - 230 deg. Beam Angle - 120 Volt

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.046A
Avg Rated Hours:
25000
Burning Position:
Universal
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
A15
Lens Finish:
Frost
Lensed:
Yes
Lumens:
450L
Operating Frequency:
60Hz
Product Type:
A-Shape Bulb
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Lighting
Product Subgroup:
Lamps & Bulbs
Incandescent Equivalent:
40W
Location Rating:
Damp
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
230
Light Temperature:
5000K
Product Category:
Light Bulbs
Product Wattage:
5.5W
Product Weight:
0.06 lb
Department:
Electrical

Satco Lighting S9033 – Frequently Asked Questions

1) Can this A15 LED go in an enclosed fixture or a covered ceiling dome?
Yes, it is an enclosed rated lamp, so a sealed globe or covered dome fixture is fine. Burning position is universal too, so base up, base down, or horizontal all work.
2) Is the Satco S9033 dimmable, and can I use it on a three-way lamp?
Dimmable, yes. Three-way, no. It is a single-circuit lamp, so in a three-way socket it will run at one output level only. For a three-way table lamp you need a lamp specified three-way.
3) Can I use this bulb outdoors in a porch light or a bathroom over a shower?
It is an indoor lamp with a damp location rating. A covered porch ceiling or a bathroom vanity where it only sees humidity is within that rating. Anywhere exposed to direct rain or spray needs a wet location rated lamp instead.
4) Can I sell or install the Satco S9033 in California?
No. This lamp is flagged non-compliant for California, so it should not be specified for jobs in that state. Pick a California-compliant LED A-lamp for those openings.
5) What does 5000K look like, and will it match the bulbs already in my building?
5000K is daylight white, a crisp blue-white with no warm cast, and the lens is frosted so the output is diffused rather than a visible point source. It will not match 2700K or 3000K warm lamps in adjacent fixtures. The color temperature is fixed, not selectable, so standardize a whole area on 5000K or it will read mismatched.
6) Is a 230 degree beam angle wide enough for a general-purpose ceiling or table lamp?
Yes. At 230 degrees the S9033 throws light nearly all the way around the bulb, including back toward the base, which is what you want for omnidirectional use in a shade, sconce, or open ceiling fixture. It is not a lamp for directional or accent aiming; use a reflector lamp for that.
7) How long does this LED last and what is the current draw per bulb for circuit loading?
Average rated life is 25,000 hours. Each lamp draws 0.046A at 120V, 60Hz, so even a long run of them barely loads a branch circuit, which is useful when you are relamping a corridor or a stairwell on one switch leg.
8) Is the color rendering on this Satco A15 good enough for a retail or office space?
CRI is 80, which is the standard commercial figure for general lighting in offices, corridors, and back-of-house. For color-critical retail display or paint matching you would want a higher-CRI lamp.
9) Does the Satco S9033 qualify for DLC-based utility rebates?
No. This lamp is not DLC approved, so it will not satisfy rebate programs that require a DesignLights Consortium listing. It is FCC compliant for electromagnetic interference.
10) What does the bulb itself look like installed, for exposed-fixture jobs?
The body is white with a frosted lens, so it reads as a plain white A-shape bulb rather than a clear filament look. In an open or shadeless fixture that gives a soft diffused appearance with no visible diodes.
How fast can I get the Satco Lighting S9033 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9033 come with a warranty?
Absolutely. The Satco Lighting S9033 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9033?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9033 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!