SATCO Lighting S9031 5.5W, A15...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.80
Satco Lighting SAT-S9031 5.5 Watt - A15 LED - Frosted - 3000K - Medium base - 230 deg. Beam Angle - 120 Volt

SATCO Lighting S9031 5.5W, A15 LED, Frosted, 3000K, Medium Base, 230 degree Beam Angle, 120V

(No reviews yet) Write a Review

Model: S9031
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.80
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9031 5.5W, A15 LED, Frosted, 3000K, Medium Base, 230 degree Beam Angle, 120V

5.5 Watt - A15 LED - Frosted - 3000K - Medium base - 230 deg. Beam Angle - 120 Volt

Manufacturer Resources

Product Specs

Amps:
0.046A
Avg Rated Hours:
25000
Burning Position:
Universal
CA T20 Alt Sub:
S8573
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
A15
Lens Finish:
Frost
Lensed:
Yes
Lumens:
450L
Operating Frequency:
60Hz
Product Type:
Type A
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
40W
Location Rating:
Damp
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
230
Light Temperature:
3000K
Product Category:
Light Bulbs
Product Wattage:
5.5W

Satco Lighting S9031 – Frequently Asked Questions

1) Can I use this Satco A15 LED bulb in a fully enclosed light fixture?
Yes. The S9031 is an enclosed rated lamp, so it can go in a closed globe, a flush-mount dome, or a jelly jar without the heat buildup shortening its life. Burning position is universal, so base-up, base-down, or horizontal all work.
2) Can I ship the Satco S9031 to a job in California?
No. This A15 LED is flagged Non-Compliant for California's Title 20 lamp regulations. Satco's listed Title 20 alternate substitute is the S8573, which is the part to spec for California work.
3) Can I use this A15 LED in a bathroom, a covered porch, or an outdoor fixture?
Damp location rated and listed for indoor use. That covers bathrooms, laundry rooms, and covered ceilings where the lamp is not exposed to direct water. It is not a wet location lamp, so skip it for open outdoor fixtures or anywhere rain can reach the bulb.
4) Is the Satco 5.5W A15 LED dimmable, and will it work on my existing dimmer?
The S9031 is a dimmable lamp on 120V line voltage. It is not a three-way bulb, so do not put it in a three-way socket expecting three levels. Older incandescent dimmers were sized for much larger loads than a 5.5 watt LED draws (0.046A), so on a multi-bulb circuit you generally get smoother low-end performance from an LED-rated dimmer.
5) What does 3000K look like, and will it match the bulbs already in my building?
3000K is warm white, a step whiter than the yellow of a classic incandescent but not the blue-white of a 4000K or 5000K lamp. It reads as soft, residential-feeling light, which is why it is common in apartments, corridors, and hospitality. Color rendering is 80 CRI. If your other fixtures are already lamped at 3000K you will get a consistent look; mixing this with 2700K or 4000K in the same sightline will show.
6) Is this a clear filament-look bulb or a frosted one, and how wide does it throw light?
Frosted. The S9031 has a frost lens finish over a white housing, so the diode array is diffused rather than visible as a filament. Beam spread is 230 degrees, which is wider than a standard bulb's forward throw and puts light back up past the base, so it works in exposed shades and bare sockets where a directional lamp would leave the ceiling dark.
7) Can I use the Satco S9031 on a DLC rebate project?
No. This A15 lamp is not DLC approved, so it will not qualify for utility programs that require DesignLights Consortium listing. It is FCC compliant for electromagnetic interference.
8) How long will the Satco S9031 last before maintenance has to relamp?
Average rated life is 25,000 hours. At roughly 12 hours a day in a common-area or corridor fixture, that works out to about 5.7 years of service, which is the argument for standardizing on it across a portfolio instead of chasing incandescent replacements.
9) Is the Satco S9031 a color-changing or tunable bulb?
No. It is a fixed 3000K warm white lamp with no CCT selection switch. If you need one SKU that can be field-set to several color temperatures, this is not that bulb.
How fast can I get the Satco Lighting S9031 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9031 come with a warranty?
Absolutely. The Satco Lighting S9031 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9031?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9031 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!