SATCO Lighting S9068 5.5W, A15...
In stock
$4.64
Satco Lighting SAT-S9068 5.5 Watt - A15 LED - 5000K - E17 Intermediate base - 230 deg. Beam Angle - 120 Volt

SATCO Lighting S9068 5.5W, A15 LED, 5000K, E17 Intermediate Base, 230 degree Beam Angle, 120V

(No reviews yet) Write a Review

Model: S9068
Selected Finish is

In stock

$4.64
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9068 5.5W, A15 LED, 5000K, E17 Intermediate Base, 230 degree Beam Angle, 120V

5.5 Watt - A15 LED - 5000K - E17 Intermediate base - 230 deg. Beam Angle - 120 Volt

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.046A
Avg Rated Hours:
25000
Burning Position:
Universal
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Intermediate
Lamp Filament:
LED
Lamp Shape:
A15
Lens Finish:
Frost
Lensed:
Yes
Lumens:
450L
Operating Frequency:
60Hz
Product Type:
Type A
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
40W
Location Rating:
Damp
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
230
Light Temperature:
5000K
Product Category:
Light Bulbs
Product Wattage:
5.5W
Product Weight:
0.06 lb
Department:
Electrical

Satco Lighting S9068 – Frequently Asked Questions

1) What incandescent bulb does this 5.5W Satco A15 LED replace?
It replaces a 40 watt incandescent. The lamp draws 5.5 watts at 120 volts and puts out 450 lumens, so you get comparable light for roughly a seventh of the load. Current draw is 0.046A, which matters if you are counting bulbs on a circuit in a multi-family or hospitality retrofit.
2) Can I use this Satco E17 LED in an enclosed fixture?
Yes, it is an enclosed rated lamp, so a sealed globe, jelly jar or closed ceiling fixture is fine. That is the difference that kills most LED bulbs early, and this one is built for it. It also burns in any position, base up, base down or horizontal.
3) Can I ship or install the Satco S9068 in California?
No. This lamp is flagged non-compliant for California, so it should not be specified for jobs in that state. For CA work you need a lamp that meets the state's efficiency regulations.
4) Is the Satco S9068 dimmable?
Yes, the 5.5W A15 is dimmable on 120V/60Hz line voltage. It is not a three-way lamp, so it will not step through the levels of a three-way socket, and the color temperature is fixed at 5000K rather than selectable.
5) What does 5000K look like, and will it match the other bulbs in my building?
5000K is daylight white, a crisp blue-white rather than the warm yellow of a typical 2700K incandescent-look bulb. It will look noticeably cooler beside 2700K or 3000K lamps, so if you are spot-replacing in a unit, match the rest of the fixtures. CRI is 80, normal for general-purpose residential and back-of-house lighting.
6) Can this Satco A15 LED go in an outdoor porch fixture or a bathroom?
It is rated for damp locations and listed for indoor use, so a covered porch ceiling, a bathroom or a similar damp spot is within rating. Do not put it anywhere it takes direct rain or spray, that needs a wet-location lamp.
7) How long does this LED last compared with the appliance bulb it replaces?
Average rated life is 25,000 hours. In a hallway or stairwell running 12 hours a day that is roughly five to six years between changes, which is the whole argument for swapping intermediate-base incandescents out across a portfolio, fewer ladder trips.
8) Will this bulb throw light evenly in an open fixture or is it directional?
Beam spread is 230 degrees, so it throws light nearly all the way around rather than in a cone. Combined with the frosted lens, that gives a diffuse output suited to open shades, globes and fan light kits where you would see hot spots from a directional lamp.
9) Is the Satco S9068 a rebate-eligible DLC listed lamp?
No, it is not DLC approved, so it will not qualify for utility programs that require a DLC listing. It is FCC compliant for radio frequency emissions.
How fast can I get the Satco Lighting S9068 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9068 come with a warranty?
Absolutely. The Satco Lighting S9068 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9068?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9068 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!