SATCO Lighting S9064 5.5W, A15...
In stock
$4.64
Satco Lighting SAT-S9064 5.5 Watt - A15 LED - 2700K - E17 Intermediate base - 230 deg. Beam Angle - 120 Volt

SATCO Lighting S9064 5.5W, A15 LED, 2700K, E17 Intermediate Base, 230 degree Beam Angle, 120V

(No reviews yet) Write a Review

Model: S9064
Selected Finish is

In stock

$4.64
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S9064 5.5W, A15 LED, 2700K, E17 Intermediate Base, 230 degree Beam Angle, 120V

5.5 Watt - A15 LED - 2700K - E17 Intermediate base - 230 deg. Beam Angle - 120 Volt

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.046A
Avg Rated Hours:
25000
Burning Position:
Universal
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Intermediate
Lamp Filament:
LED
Lamp Shape:
A15
Lens Finish:
Frost
Lensed:
Yes
Lumens:
450L
Operating Frequency:
60Hz
Product Type:
Type A
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
40W
Location Rating:
Damp
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
230
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
5.5W
Product Weight:
0.06 lb
Department:
Electrical

Satco Lighting S9064 – Frequently Asked Questions

1) What incandescent wattage does this 5.5W Satco A15 LED replace?
It replaces a 40W incandescent A15 while drawing 5.5 watts at 120 volts, putting out 450 lumens. Current draw is 0.046A, so you can put a lot of them on one circuit compared with the incandescents you are pulling out.
2) Is this A15 LED safe to install in a fully enclosed fixture?
It is an enclosed rated lamp, so closed globes, jelly jars, and sealed ceiling fan light kits are fair game. Burning position is universal, meaning base up, base down, or horizontal all work.
3) Can the Satco S9064 go in a bathroom or a covered porch fixture?
It carries a damp location rating and is classified as an indoor lamp. Bathrooms, laundry rooms, and covered exterior ceilings where the fixture itself keeps water off the lamp are fine. Do not put it anywhere it can be hit by rain or hose spray, which needs a wet location lamp.
4) Can I use this Satco A15 LED bulb on a dimmer?
Yes, the S9064 is a dimmable lamp on 120V/60Hz line voltage. As with any LED retrofit, older incandescent-style dimmers with a high minimum load may not run a single 5.5W lamp smoothly; an LED-rated dimmer is the safer pairing.
5) Will the 2700K color match the incandescent bulbs already in my building?
2700K is the warm white that reads the same as a standard incandescent, so it blends with existing incandescent or warm LED lamps on adjacent fixtures. CRI is 80, and the color temperature is fixed, not selectable, so every unit you order looks the same across a property.
6) Does this Satco A15 work as a three-way bulb?
No. The S9064 is a single-level lamp, not a three-way, so in a three-way socket it will run at one brightness regardless of switch position. For a three-way fixture you need a lamp specifically built for it.
7) How long does this LED last compared to the A15 incandescents I keep replacing?
Rated average life is 25,000 hours. On a fixture burning roughly 8 hours a day that is about 8.5 years, which is the argument for swapping out hard-to-reach appliance and fan-kit lamps across a portfolio in one pass.
8) Can I sell or install the Satco S9064 in California?
Satco flags this lamp as non-compliant for California, so it should not be specified for jobs subject to that state's lamp regulations. For those openings, choose an A15 LED that carries California compliance.
9) Will this bulb throw light in all directions or just downward?
Beam spread is 230 degrees, so light goes out to the sides and forward rather than being confined to a narrow cone. Combined with the frosted lens, that suits open shades and globes where you do not want a visible hot spot. It is not a directional reflector lamp.
How fast can I get the Satco Lighting S9064 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9064 come with a warranty?
Absolutely. The Satco Lighting S9064 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9064?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9064 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!